@@ -58,6 +58,77 @@ bt {
};
+ thermal-zones {
+ xo-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 0>;
+ trips {
+ active-config0 {
+ temperature = <50000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ wifi-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150_adc_tm 1>;
+ trips {
+ active-config0 {
+ temperature = <52000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ conn-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150b_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ skin-msm-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <50000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ pm8150l-therm {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8150l_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <50000>;
+ hysteresis = <4000>;
+ type = "passive";
+ };
+ };
+ };
+
+ };
+
vbat: vbat-regulator {
compatible = "regulator-fixed";
regulator-name = "VBAT";
@@ -412,6 +483,89 @@ &i2c15 {
status = "okay";
};
+&pm8150_adc {
+ xo-therm@4c {
+ reg = <ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ wifi-therm@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150b_adc {
+ conn-therm@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150l_adc {
+ skin-msm-therm@4e {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+
+ pm8150l-therm@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm8150_adc_tm {
+ status = "okay";
+
+ xo-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ wifi-therm@1 {
+ reg = <1>;
+ io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm8150b_adc_tm {
+ status = "okay";
+
+ conn-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm8150l_adc_tm {
+ status = "okay";
+
+ skin-msm-therm@0 {
+ reg = <0>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ pm8150l-therm@1 {
+ reg = <1>;
+ io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
&pm8150_gpios {
gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
gpio-line-names =
Add thermal zones definitions basing on the downstream kernel. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 154 +++++++++++++++++++++++ 1 file changed, 154 insertions(+)