@@ -5,6 +5,7 @@
* Copyright (C) 1999 - 2001 Greg Kroah-Hartman <greg@kroah.com>
* Copyright (C) 1999, 2000 Brian Warner <warner@lothar.com>
* Copyright (C) 2000 Al Borchers <borchers@steinerpoint.com>
+ * Copyright (C) 2020 Johan Hovold <johan@kernel.org>
*
* See Documentation/usb/usb-serial.rst for more information on using this
* driver
@@ -37,7 +38,7 @@
#undef XIRCOM
#endif
-#define DRIVER_AUTHOR "Brian Warner <warner@lothar.com>"
+#define DRIVER_AUTHOR "Brian Warner <warner@lothar.com>, Johan Hovold <johan@kernel.org>"
#define DRIVER_DESC "USB Keyspan PDA Converter driver"
#define KEYSPAN_TX_THRESHOLD 128
@@ -49,6 +50,7 @@ struct keyspan_pda_private {
struct usb_serial_port *port;
};
+static int keyspan_pda_write_start(struct usb_serial_port *port);
#define KEYSPAN_VENDOR_ID 0x06cd
#define KEYSPAN_PDA_FAKE_ID 0x0103
@@ -228,6 +230,9 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
spin_lock_irqsave(&port->lock, flags);
priv->tx_room = max(priv->tx_room, KEYSPAN_TX_THRESHOLD);
spin_unlock_irqrestore(&port->lock, flags);
+
+ keyspan_pda_write_start(port);
+
/* queue up a wakeup at scheduler time */
usb_serial_port_softint(port);
break;
@@ -482,15 +487,15 @@ static int keyspan_pda_tiocmset(struct tty_struct *tty,
return rc;
}
-static int keyspan_pda_write(struct tty_struct *tty,
- struct usb_serial_port *port, const unsigned char *buf, int count)
+static int keyspan_pda_write_start(struct usb_serial_port *port)
{
- struct keyspan_pda_private *priv;
+ struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
+ struct urb *urb;
+ int count;
int room;
int rc;
- priv = usb_get_serial_port_data(port);
/*
* Guess how much room is left in the device's ring buffer. If our
* write will result in no room left, ask the device to give us an
@@ -499,50 +504,48 @@ static int keyspan_pda_write(struct tty_struct *tty,
* too conservative and the buffer is already empty when the
* unthrottle work is scheduled).
*/
- if (count == 0) {
- dev_dbg(&port->dev, "write request of 0 bytes\n");
- return 0;
- }
-
- if (count > port->bulk_out_size)
- count = port->bulk_out_size;
/* we might block because of:
the TX urb is in-flight (wait until it completes)
the device is full (wait until it says there is room)
*/
spin_lock_irqsave(&port->lock, flags);
+
room = priv->tx_room;
- if (!test_bit(0, &port->write_urbs_free) || room == 0) {
+ count = kfifo_len(&port->write_fifo);
+
+ if (!test_bit(0, &port->write_urbs_free) || count == 0 || room == 0) {
spin_unlock_irqrestore(&port->lock, flags);
return 0;
}
- clear_bit(0, &port->write_urbs_free);
+ __clear_bit(0, &port->write_urbs_free);
+
if (count > room)
count = room;
+ if (count > port->bulk_out_size)
+ count = port->bulk_out_size;
+
+ urb = port->write_urb;
+ count = kfifo_out(&port->write_fifo, urb->transfer_buffer, count);
+ urb->transfer_buffer_length = count;
+
+ port->tx_bytes += count;
priv->tx_room -= count;
- spin_unlock_irqrestore(&port->lock, flags);
- /* At this point the URB is in our control, nobody else can submit it
- again (the only sudden transition was the one from EINPROGRESS to
- finished). Also, the tx process is not throttled. So we are
- ready to write. */
+ spin_unlock_irqrestore(&port->lock, flags);
dev_dbg(&port->dev, "%s - count = %d, txroom = %d\n", __func__, count, room);
- memcpy(port->write_urb->transfer_buffer, buf, count);
- port->write_urb->transfer_buffer_length = count;
-
- rc = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+ rc = usb_submit_urb(urb, GFP_ATOMIC);
if (rc) {
dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed\n");
spin_lock_irqsave(&port->lock, flags);
+ port->tx_bytes -= count;
priv->tx_room = max(priv->tx_room, room + count);
+ __set_bit(0, &port->write_urbs_free);
spin_unlock_irqrestore(&port->lock, flags);
- set_bit(0, &port->write_urbs_free);
-
return rc;
}
@@ -555,51 +558,38 @@ static int keyspan_pda_write(struct tty_struct *tty,
static void keyspan_pda_write_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
- struct keyspan_pda_private *priv;
+ unsigned long flags;
- set_bit(0, &port->write_urbs_free);
- priv = usb_get_serial_port_data(port);
+ spin_lock_irqsave(&port->lock, flags);
+ port->tx_bytes -= urb->transfer_buffer_length;
+ __set_bit(0, &port->write_urbs_free);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ keyspan_pda_write_start(port);
/* queue up a wakeup at scheduler time */
usb_serial_port_softint(port);
}
-
-static int keyspan_pda_write_room(struct tty_struct *tty)
+static int keyspan_pda_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count)
{
- struct usb_serial_port *port = tty->driver_data;
- struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
- int room = 0;
-
- spin_lock_irqsave(&port->lock, flags);
- if (test_bit(0, &port->write_urbs_free))
- room = priv->tx_room;
- spin_unlock_irqrestore(&port->lock, flags);
+ int rc;
- return room;
-}
+ dev_dbg(&port->dev, "%s - count = %d\n", __func__, count);
-static int keyspan_pda_chars_in_buffer(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct keyspan_pda_private *priv;
- unsigned long flags;
- int ret = 0;
+ if (!count)
+ return 0;
- priv = usb_get_serial_port_data(port);
+ count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
- /* when throttled, return at least WAKEUP_CHARS to tell select() (via
- n_tty.c:normal_poll() ) that we're not writeable. */
+ rc = keyspan_pda_write_start(port);
+ if (rc)
+ return rc;
- spin_lock_irqsave(&port->lock, flags);
- if (!test_bit(0, &port->write_urbs_free) || priv->tx_room == 0)
- ret = 256;
- spin_unlock_irqrestore(&port->lock, flags);
- return ret;
+ return count;
}
-
static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
{
struct usb_serial *serial = port->serial;
@@ -640,12 +630,19 @@ static void keyspan_pda_close(struct usb_serial_port *port)
{
struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
- usb_kill_urb(port->write_urb);
+ /*
+ * Stop the interrupt URB first as its completion handler may submit
+ * the write URB.
+ */
usb_kill_urb(port->interrupt_in_urb);
+ usb_kill_urb(port->write_urb);
cancel_work_sync(&priv->unthrottle_work);
-}
+ spin_lock_irq(&port->lock);
+ kfifo_reset(&port->write_fifo);
+ spin_unlock_irq(&port->lock);
+}
/* download the firmware to a "fake" device (pre-renumeration) */
static int keyspan_pda_fake_startup(struct usb_serial *serial)
@@ -759,10 +756,8 @@ static struct usb_serial_driver keyspan_pda_device = {
.open = keyspan_pda_open,
.close = keyspan_pda_close,
.write = keyspan_pda_write,
- .write_room = keyspan_pda_write_room,
.write_bulk_callback = keyspan_pda_write_bulk_callback,
.read_int_callback = keyspan_pda_rx_interrupt,
- .chars_in_buffer = keyspan_pda_chars_in_buffer,
.throttle = keyspan_pda_rx_throttle,
.unthrottle = keyspan_pda_rx_unthrottle,
.set_termios = keyspan_pda_set_termios,
Use the port write fifo and generic chars_and_buffer and write_room implementations when writing. This not only allows for more efficient transfers, but more importantly fixes the remaining issues related to the conservative write_room() implementation which could prevent the line discipline from making forward progress (e.g. waiting for n > 1 bytes of space to become available). Note that this also allows using the driver for the system console without dropping data when the write URB is busy (including when adding carriage return on line feed). Signed-off-by: Johan Hovold <johan@kernel.org> --- drivers/usb/serial/keyspan_pda.c | 115 +++++++++++++++---------------- 1 file changed, 55 insertions(+), 60 deletions(-)