diff mbox series

[01/13] can: mcp25xxfd: mcp25xxfd_handle_eccif(): add ECC related errata and update log messages

Message ID 20200930201816.1032054-2-mkl@pengutronix.de
State New
Headers show
Series [01/13] can: mcp25xxfd: mcp25xxfd_handle_eccif(): add ECC related errata and update log messages | expand

Commit Message

Marc Kleine-Budde Sept. 30, 2020, 8:18 p.m. UTC 
From: Thomas Kopp <thomas.kopp@microchip.com>

This patch adds a reference to the recent released MCP2517FD and MCP2518FD
errata sheets and paste the explanation.

The single error correction does not always work, so always indicate that a
single error occurred. If the location of the ECC error is outside of the
TX-RAM always use netdev_notice() to log the problem. For ECC errors in the
TX-RAM, there is a recovery procedure.

Signed-off-by: Thomas Kopp <thomas.kopp@microchip.com>
Link: https://lore.kernel.org/r/20200925065606.358-1-thomas.kopp@microchip.com
[mkl: split into two patches, adjust subject and commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 .../net/can/spi/mcp25xxfd/mcp25xxfd-core.c    | 21 ++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c
index bd2ba981ae36..106dda8e5310 100644
--- a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c
+++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd-core.c
@@ -1973,8 +1973,20 @@  mcp25xxfd_handle_eccif(struct mcp25xxfd_priv *priv, bool set_normal_mode)
 	else
 		return err;
 
+	/* Errata Reference:
+	 * mcp2517fd: DS80000789B, mcp2518fd: DS80000792C 2.
+	 *
+	 * ECC single error correction does not work in all cases:
+	 *
+	 * Fix/Work Around:
+	 * Enable single error correction and double error detection
+	 * interrupts by setting SECIE and DEDIE. Handle SECIF as a
+	 * detection interrupt and do not rely on the error
+	 * correction. Instead, handle both interrupts as a
+	 * notification that the RAM word at ERRADDR was corrupted.
+	 */
 	if (ecc_stat & MCP25XXFD_REG_ECCSTAT_SECIF)
-		msg = "Single ECC Error corrected at address";
+		msg = "Single ECC Error detected at address";
 	else if (ecc_stat & MCP25XXFD_REG_ECCSTAT_DEDIF)
 		msg = "Double ECC Error detected at address";
 	else
@@ -1983,12 +1995,7 @@  mcp25xxfd_handle_eccif(struct mcp25xxfd_priv *priv, bool set_normal_mode)
 	if (!in_tx_ram) {
 		ecc->ecc_stat = 0;
 
-		if (ecc_stat & MCP25XXFD_REG_ECCSTAT_SECIF)
-			netdev_info(priv->ndev, "%s 0x%04x.\n",
-				    msg, addr);
-		else
-			netdev_notice(priv->ndev, "%s 0x%04x.\n",
-				      msg, addr);
+		netdev_notice(priv->ndev, "%s 0x%04x.\n", msg, addr);
 	} else {
 		/* Re-occurring error? */
 		if (ecc->ecc_stat == ecc_stat) {