diff mbox series

[01/11] arm64: dts: qcom: pm8994: Add VADC node

Message ID 20201005150313.149754-2-konradybcio@gmail.com
State Accepted
Commit 183d4cafa711acd4ca2b1d682c8b867d549f2bc4
Headers show
Series pm8994 / msm8992/4 DT updates | expand

Commit Message

Konrad Dybcio Oct. 5, 2020, 3:03 p.m. UTC 
Add VADC note and some of its channels to allow
for voltage/temperature reading.

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
 arch/arm64/boot/dts/qcom/pm8994.dtsi | 36 +++++++++++++++++++++++++++-
 1 file changed, 35 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index 7e4f777746cb..ea2a3d53f859 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -1,7 +1,8 @@ 
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
-#include <dt-bindings/input/linux-event-codes.h>
 
 &spmi_bus {
 
@@ -35,6 +36,39 @@  pwrkey {
 
 		};
 
+		pm8994_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			adc-chan@7 {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+			adc-chan@8 {
+				reg = <VADC_DIE_TEMP>;
+				label = "die_temp";
+			};
+			adc-chan@9 {
+				reg = <VADC_REF_625MV>;
+				label = "ref_625mv";
+			};
+			adc-chan@a {
+				reg = <VADC_REF_1250MV>;
+				label = "ref_1250mv";
+			};
+			adc-chan@e {
+				reg = <VADC_GND_REF>;
+			};
+			adc-chan@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
 		pm8994_gpios: gpios@c000 {
 			compatible = "qcom,pm8994-gpio";
 			reg = <0xc000>;