diff mbox series

[v1,05/10] bus: mhi: core: Disable IRQs when powering down

Message ID 1600480955-16827-6-git-send-email-bbhatt@codeaurora.org
State New
Headers show
Series Bug fixes and improvements for MHI power operations | expand

Commit Message

Bhaumik Bhatt Sept. 19, 2020, 2:02 a.m. UTC
While powering down, the device may or may not acknowledge the MHI
RESET issued by host for graceful shutdown scenario which can lead
to a rogue device sending an interrupt after the clean-up has been
done. This can result in a tasklet being scheduled after it has
been killed and access already freed memory causing a NULL pointer
exception. Avoid this corner case by disabling the interrupts as a
part of host clean up.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/pm.c | 1 +
 1 file changed, 1 insertion(+)

Comments

Manivannan Sadhasivam Oct. 9, 2020, 4:02 p.m. UTC | #1
On Fri, Sep 18, 2020 at 07:02:30PM -0700, Bhaumik Bhatt wrote:
> While powering down, the device may or may not acknowledge the MHI

> RESET issued by host for graceful shutdown scenario which can lead

> to a rogue device sending an interrupt after the clean-up has been

> done. This can result in a tasklet being scheduled after it has

> been killed and access already freed memory causing a NULL pointer

> exception. Avoid this corner case by disabling the interrupts as a

> part of host clean up.

> 

> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>

> ---

>  drivers/bus/mhi/core/pm.c | 1 +

>  1 file changed, 1 insertion(+)

> 

> diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c

> index 1862960..3462d82 100644

> --- a/drivers/bus/mhi/core/pm.c

> +++ b/drivers/bus/mhi/core/pm.c

> @@ -517,6 +517,7 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl,

>  	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {

>  		if (mhi_event->offload_ev)

>  			continue;

> +		disable_irq(mhi_cntrl->irq[mhi_event->irq]);


No need to disable irq[0]?

Thanks,
Mani

>  		tasklet_kill(&mhi_event->task);

>  	}

>  

> -- 

> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,

> a Linux Foundation Collaborative Project

>
Manu Gautam Oct. 10, 2020, 11:45 p.m. UTC | #2
Hi

On 9/19/2020 7:32 AM, Bhaumik Bhatt wrote:
> While powering down, the device may or may not acknowledge the MHI

> RESET issued by host for graceful shutdown scenario which can lead

> to a rogue device sending an interrupt after the clean-up has been

> done. This can result in a tasklet being scheduled after it has

> been killed and access already freed memory causing a NULL pointer

> exception. Avoid this corner case by disabling the interrupts as a

> part of host clean up.

>

> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>

> ---

>  drivers/bus/mhi/core/pm.c | 1 +

>  1 file changed, 1 insertion(+)

>

> diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c

> index 1862960..3462d82 100644

> --- a/drivers/bus/mhi/core/pm.c

> +++ b/drivers/bus/mhi/core/pm.c

> @@ -517,6 +517,7 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl,

>  	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {

>  		if (mhi_event->offload_ev)

>  			continue;

> +		disable_irq(mhi_cntrl->irq[mhi_event->irq]);

>  		tasklet_kill(&mhi_event->task);

>  	}

>  


What about sys_err handling? IRQ may be left disabled?


-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
diff mbox series

Patch

diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 1862960..3462d82 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -517,6 +517,7 @@  static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl,
 	for (i = 0; i < mhi_cntrl->total_ev_rings; i++, mhi_event++) {
 		if (mhi_event->offload_ev)
 			continue;
+		disable_irq(mhi_cntrl->irq[mhi_event->irq]);
 		tasklet_kill(&mhi_event->task);
 	}