diff mbox

[v6,1/2] video: ARM CLCD: Add DT support

Message ID 1399546830-2931-1-git-send-email-pawel.moll@arm.com
State New
Headers show

Commit Message

Pawel Moll May 8, 2014, 11 a.m. UTC
This patch adds basic DT bindings for the PL11x CLCD cells
and make their fbdev driver use them.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
---
Changes since v5:
- realised that dma_alloc_writecombine() is a arm-specific function;
  replaced with generic dma_alloc_coherent()/dma_mmap_writecombine()

Changes since v4:
- simplified the pads description property and made it optional

Changes since v3:
- changed wording and order of interrupt-names and interrupts
  properties documentation
- changed wording of arm,pl11x,framebuffer-base property
  documentation
- cleaned up binding documentation indentation

Changes since v2:
- replaced video-ram phandle with arm,pl11x,framebuffer-base
- replaced panel-* properties with arm,pl11x,panel-data-pads
- replaced max-framebuffer-size with max-memory-bandwidth
- modified clcdfb_of_init_tft_panel() to use the pads
  data and take differences between PL110 and PL110 into
  account

Changes since v1:
- minor code cleanups as suggested by Sylwester Nawrocki

 .../devicetree/bindings/video/arm,pl11x.txt        |  83 ++++++++
 drivers/video/fbdev/Kconfig                        |   2 +
 drivers/video/fbdev/amba-clcd.c                    | 219 +++++++++++++++++++++
 3 files changed, 304 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/arm,pl11x.txt

Comments

Pawel Moll May 8, 2014, 11:09 a.m. UTC | #1
On Thu, 2014-05-08 at 12:00 +0100, Pawel Moll wrote:
> This patch adds basic DT bindings for the PL11x CLCD cells
> and make their fbdev driver use them.
> 
> Signed-off-by: Pawel Moll <pawel.moll@arm.com>

Russell,

I've added it to your patch system as 8005/2. If you were so kind to
have a look, I would appreciate either ack or nak.

Thanks!

Pawel

--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/video/arm,pl11x.txt b/Documentation/devicetree/bindings/video/arm,pl11x.txt
new file mode 100644
index 0000000..75da7b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/arm,pl11x.txt
@@ -0,0 +1,83 @@ 
+* ARM PrimeCell Color LCD Controller PL110/PL111
+
+See also Documentation/devicetree/bindings/arm/primecell.txt
+
+Required properties:
+
+- compatible: must be one of:
+	"arm,pl110", "arm,primecell"
+	"arm,pl111", "arm,primecell"
+
+- reg: base address and size of the control registers block
+
+- interrupt-names: either the single entry "combined" representing a
+	combined interrupt output (CLCDINTR), or the four entries
+	"mbe", "vcomp", "lnbu", "fuf" representing the individual
+	CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts
+
+- interrupts: contains an interrupt specifier for each entry in
+	interrupt-names
+
+- clocks-names: should contain "clcdclk" and "apb_pclk"
+
+- clocks: contains phandle and clock specifier pairs for the entries
+	in the clock-names property. See
+	Documentation/devicetree/binding/clock/clock-bindings.txt
+
+Optional properties:
+
+- arm,pl11x,framebuffer-base: a pair of two 32-bit values, address and size,
+	defining the framebuffer that must be used; if not present, the
+	framebuffer may be located anywhere in the memory
+
+- arm,pl11x,tft-r0g0b0-pads: when connected to a TFT panel, an array of three
+	32-bit values, defining the way CLD pads are wired up; this implicitly
+	defines available color modes, for example:
+	- PL111 TFT 4:4:4 panel:
+		arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
+	- PL110 TFT (1:)5:5:5 panel:
+		arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+	- PL111 TFT (1:)5:5:5 panel:
+		arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
+	- PL111 TFT 5:6:5 panel:
+		arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
+	- PL110 and PL111 TFT 8:8:8 panel:
+		arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+	- PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
+		arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+
+- max-memory-bandwidth: maximum bandwidth in bytes per second that the
+	cell's memory interface can handle
+
+- display-timings: standard display timings sub-node, defining possible
+	video modes of a connected panel; for details see
+	Documentation/devicetree/bindings/video/display-timing.txt
+
+Example:
+
+	clcd@1f0000 {
+		compatible = "arm,pl111", "arm,primecell";
+		reg = <0x1f0000 0x1000>;
+		interrupt-names = "combined";
+		interrupts = <14>;
+		clock-names = "clcdclk", "apb_pclk";
+		clocks = <&v2m_oscclk1>, <&smbclk>;
+
+		arm,pl11x,framebuffer-base = <0x18000000 0x00800000>;
+		arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+		max-memory-bandwidth = <36864000>; /* bps, 640x480@60 16bpp */
+		display-timings {
+			native-mode = <&v2m_clcd_timing0>;
+			v2m_clcd_timing0: vga {
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				hback-porch = <40>;
+				hfront-porch = <24>;
+				hsync-len = <96>;
+				vactive = <480>;
+				vback-porch = <32>;
+				vfront-porch = <11>;
+				vsync-len = <2>;
+			};
+		};
+	};
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index e1f4727..06045d8 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -280,6 +280,8 @@  config FB_ARMCLCD
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS if OF
+	select VIDEOMODE_HELPERS if OF
 	help
 	  This framebuffer device driver is for the ARM PrimeCell PL110
 	  Colour LCD controller.  ARM PrimeCells provide the building
diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
index 14d6b37..c1f2eaa 100644
--- a/drivers/video/fbdev/amba-clcd.c
+++ b/drivers/video/fbdev/amba-clcd.c
@@ -26,6 +26,11 @@ 
 #include <linux/amba/clcd.h>
 #include <linux/clk.h>
 #include <linux/hardirq.h>
+#include <linux/dma-mapping.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <video/of_display_timing.h>
+#include <video/of_videomode.h>
 
 #include <asm/sizes.h>
 
@@ -543,6 +548,217 @@  static int clcdfb_register(struct clcd_fb *fb)
 	return ret;
 }
 
+#ifdef CONFIG_OF
+static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0)
+{
+	static struct {
+		unsigned int part;
+		u32 r0, g0, b0;
+		u32 caps;
+	} panels[] = {
+		{ 0x110, 1,  7, 13, CLCD_CAP_5551 },
+		{ 0x110, 0,  8, 16, CLCD_CAP_888 },
+		{ 0x111, 4, 14, 20, CLCD_CAP_444 },
+		{ 0x111, 3, 11, 19, CLCD_CAP_444 | CLCD_CAP_5551 },
+		{ 0x111, 3, 10, 19, CLCD_CAP_444 | CLCD_CAP_5551 |
+				    CLCD_CAP_565 },
+		{ 0x111, 0,  8, 16, CLCD_CAP_444 | CLCD_CAP_5551 |
+				    CLCD_CAP_565 | CLCD_CAP_888 },
+	};
+	int i;
+
+	/* Bypass pixel clock divider, data output on the falling edge */
+	fb->panel->tim2 = TIM2_BCD | TIM2_IPC;
+
+	/* TFT display, vert. comp. interrupt at the start of the back porch */
+	fb->panel->cntl |= CNTL_LCDTFT | CNTL_LCDVCOMP(1);
+
+	fb->panel->caps = 0;
+
+	/* Match the setup with known variants */
+	for (i = 0; i < ARRAY_SIZE(panels) && !fb->panel->caps; i++) {
+		if (amba_part(fb->dev) != panels[i].part)
+			continue;
+		if (g0 != panels[i].g0)
+			continue;
+		if (r0 == panels[i].r0 && b0 == panels[i].b0)
+			fb->panel->caps = panels[i].caps & CLCD_CAP_RGB;
+		if (r0 == panels[i].b0 && b0 == panels[i].r0)
+			fb->panel->caps = panels[i].caps & CLCD_CAP_BGR;
+	}
+
+	return fb->panel->caps ? 0 : -EINVAL;
+}
+
+static int clcdfb_snprintf_mode(char *buf, int size, struct fb_videomode *mode)
+{
+	return snprintf(buf, size, "%ux%u@%u", mode->xres, mode->yres,
+			mode->refresh);
+}
+
+static int clcdfb_of_init_display(struct clcd_fb *fb)
+{
+	struct device_node *node = fb->dev->dev.of_node;
+	int err, len;
+	char *mode_name;
+	u32 max_bandwidth;
+	u32 tft_r0b0g0[3];
+
+	fb->panel = devm_kzalloc(&fb->dev->dev, sizeof(*fb->panel), GFP_KERNEL);
+	if (!fb->panel)
+		return -ENOMEM;
+
+	err = of_get_fb_videomode(node, &fb->panel->mode, OF_USE_NATIVE_MODE);
+	if (err)
+		return err;
+
+	len = clcdfb_snprintf_mode(NULL, 0, &fb->panel->mode);
+	mode_name = devm_kzalloc(&fb->dev->dev, len + 1, GFP_KERNEL);
+	clcdfb_snprintf_mode(mode_name, len + 1, &fb->panel->mode);
+	fb->panel->mode.name = mode_name;
+
+	err = of_property_read_u32(node, "max-memory-bandwidth",
+			&max_bandwidth);
+	if (!err)
+		fb->panel->bpp = 8 * max_bandwidth / (fb->panel->mode.xres *
+				fb->panel->mode.yres * fb->panel->mode.refresh);
+	else
+		fb->panel->bpp = 32;
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	fb->panel->cntl |= CNTL_BEBO;
+#endif
+	fb->panel->width = -1;
+	fb->panel->height = -1;
+
+	if (of_property_read_u32_array(node, "arm,pl11x,tft-r0g0b0-pads",
+			tft_r0b0g0, ARRAY_SIZE(tft_r0b0g0)) == 0)
+		return clcdfb_of_init_tft_panel(fb, tft_r0b0g0[0],
+				 tft_r0b0g0[1],  tft_r0b0g0[2]);
+
+	return -ENOENT;
+}
+
+static int clcdfb_of_vram_setup(struct clcd_fb *fb)
+{
+	int err;
+	u32 values[2];
+	phys_addr_t phys_base;
+	size_t size;
+
+	err = clcdfb_of_init_display(fb);
+	if (err)
+		return err;
+
+	err = of_property_read_u32_array(fb->dev->dev.of_node,
+			"arm,pl11x,framebuffer-base",
+			values, ARRAY_SIZE(values));
+	if (err)
+		return err;
+
+	phys_base = values[0];
+	size = values[1];
+
+	fb->fb.screen_base = ioremap(phys_base, size);
+	if (!fb->fb.screen_base)
+		return -ENOMEM;
+
+	fb->fb.fix.smem_start = phys_base;
+	fb->fb.fix.smem_len = size;
+
+	return 0;
+}
+
+static int clcdfb_of_vram_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	unsigned long off, user_size, kernel_size;
+
+
+	off = vma->vm_pgoff << PAGE_SHIFT;
+	user_size = vma->vm_end - vma->vm_start;
+	kernel_size = fb->fb.fix.smem_len;
+
+	if (off >= kernel_size || user_size > (kernel_size - off))
+		return -ENXIO;
+
+	return remap_pfn_range(vma, vma->vm_start,
+			__phys_to_pfn(fb->fb.fix.smem_start) + vma->vm_pgoff,
+			user_size,
+			pgprot_writecombine(vma->vm_page_prot));
+}
+
+static void clcdfb_of_vram_remove(struct clcd_fb *fb)
+{
+	iounmap(fb->fb.screen_base);
+}
+
+static int clcdfb_of_dma_setup(struct clcd_fb *fb)
+{
+	unsigned long framesize;
+	dma_addr_t dma;
+	int err;
+
+	err = clcdfb_of_init_display(fb);
+	if (err)
+		return err;
+
+	framesize = fb->panel->mode.xres * fb->panel->mode.yres *
+			fb->panel->bpp / 8;
+	fb->fb.screen_base = dma_alloc_coherent(&fb->dev->dev, framesize,
+			&dma, GFP_KERNEL);
+	if (!fb->fb.screen_base)
+		return -ENOMEM;
+
+	fb->fb.fix.smem_start = dma;
+	fb->fb.fix.smem_len = framesize;
+
+	return 0;
+}
+
+static int clcdfb_of_dma_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base,
+			fb->fb.fix.smem_start, fb->fb.fix.smem_len);
+}
+
+static void clcdfb_of_dma_remove(struct clcd_fb *fb)
+{
+	dma_free_coherent(&fb->dev->dev, fb->fb.fix.smem_len,
+			fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
+{
+	struct clcd_board *board = devm_kzalloc(&dev->dev, sizeof(*board),
+			GFP_KERNEL);
+	struct device_node *node = dev->dev.of_node;
+
+	if (!board)
+		return NULL;
+
+	board->name = of_node_full_name(node);
+	board->caps = CLCD_CAP_ALL;
+	board->check = clcdfb_check;
+	board->decode = clcdfb_decode;
+	if (of_find_property(node, "arm,pl11x,framebuffer-base", NULL)) {
+		board->setup = clcdfb_of_vram_setup;
+		board->mmap = clcdfb_of_vram_mmap;
+		board->remove = clcdfb_of_vram_remove;
+	} else {
+		board->setup = clcdfb_of_dma_setup;
+		board->mmap = clcdfb_of_dma_mmap;
+		board->remove = clcdfb_of_dma_remove;
+	}
+
+	return board;
+}
+#else
+static struct clcd_board *clcdfb_of_get_board(struct amba_dev *dev)
+{
+	return NULL;
+}
+#endif
+
 static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct clcd_board *board = dev_get_platdata(&dev->dev);
@@ -550,6 +766,9 @@  static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
 	int ret;
 
 	if (!board)
+		board = clcdfb_of_get_board(dev);
+
+	if (!board)
 		return -EINVAL;
 
 	ret = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));