diff mbox

Fix last sector write on sd card

Message ID 20110725122130.GA5297@davesworkthinkpad
State Accepted
Commit 33fa8234c3d642317583c992b7fdc67ce7fdd1b5
Headers show

Commit Message

Dr. David Alan Gilbert July 25, 2011, 12:21 p.m. UTC
When writing the last sector of an SD card using WRITE_MULTIPLE_BLOCK
QEmu throws an error saying that we've run off the end, and leaves
itself in the wrong state.

    Tested on ARM Vexpress model.

Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org>

---
Don't throw address error on last block, and leave in correct state.

Comments

Anthony Liguori July 29, 2011, 2:36 p.m. UTC | #1
On 07/25/2011 07:21 AM, Dr. David Alan Gilbert wrote:
>      When writing the last sector of an SD card using WRITE_MULTIPLE_BLOCK
> QEmu throws an error saying that we've run off the end, and leaves
> itself in the wrong state.
>
>      Tested on ARM Vexpress model.
>
> Signed-off-by: Dr. David Alan Gilbert<david.gilbert@linaro.org>

Applied.  Thanks.

Regards,

Anthony Liguori

>
> ---
> Don't throw address error on last block, and leave in correct state.
>
> diff --git a/hw/sd.c b/hw/sd.c
> index cedfb20..219a0dd 100644
> --- a/hw/sd.c
> +++ b/hw/sd.c
> @@ -1450,14 +1450,8 @@ void sd_write_data(SDState *sd, uint8_t value)
>           break;
>
>       case 25:	/* CMD25:  WRITE_MULTIPLE_BLOCK */
> -        sd->data[sd->data_offset ++] = value;
> -        if (sd->data_offset>= sd->blk_len) {
> -            /* TODO: Check CRC before committing */
> -            sd->state = sd_programming_state;
> -            BLK_WRITE_BLOCK(sd->data_start, sd->data_offset);
> -            sd->blk_written ++;
> -            sd->data_start += sd->blk_len;
> -            sd->data_offset = 0;
> +        if (sd->data_offset == 0) {
> +            /* Start of the block - lets check the address is valid */
>               if (sd->data_start + sd->blk_len>  sd->size) {
>                   sd->card_status |= ADDRESS_ERROR;
>                   break;
> @@ -1466,6 +1460,15 @@ void sd_write_data(SDState *sd, uint8_t value)
>                   sd->card_status |= WP_VIOLATION;
>                   break;
>               }
> +        }
> +        sd->data[sd->data_offset++] = value;
> +        if (sd->data_offset>= sd->blk_len) {
> +            /* TODO: Check CRC before committing */
> +            sd->state = sd_programming_state;
> +            BLK_WRITE_BLOCK(sd->data_start, sd->data_offset);
> +            sd->blk_written++;
> +            sd->data_start += sd->blk_len;
> +            sd->data_offset = 0;
>               sd->csd[14] |= 0x40;
>
>               /* Bzzzzzzztt .... Operation complete.  */
>
>
diff mbox

Patch

diff --git a/hw/sd.c b/hw/sd.c
index cedfb20..219a0dd 100644
--- a/hw/sd.c
+++ b/hw/sd.c
@@ -1450,14 +1450,8 @@  void sd_write_data(SDState *sd, uint8_t value)
         break;
 
     case 25:	/* CMD25:  WRITE_MULTIPLE_BLOCK */
-        sd->data[sd->data_offset ++] = value;
-        if (sd->data_offset >= sd->blk_len) {
-            /* TODO: Check CRC before committing */
-            sd->state = sd_programming_state;
-            BLK_WRITE_BLOCK(sd->data_start, sd->data_offset);
-            sd->blk_written ++;
-            sd->data_start += sd->blk_len;
-            sd->data_offset = 0;
+        if (sd->data_offset == 0) {
+            /* Start of the block - lets check the address is valid */
             if (sd->data_start + sd->blk_len > sd->size) {
                 sd->card_status |= ADDRESS_ERROR;
                 break;
@@ -1466,6 +1460,15 @@  void sd_write_data(SDState *sd, uint8_t value)
                 sd->card_status |= WP_VIOLATION;
                 break;
             }
+        }
+        sd->data[sd->data_offset++] = value;
+        if (sd->data_offset >= sd->blk_len) {
+            /* TODO: Check CRC before committing */
+            sd->state = sd_programming_state;
+            BLK_WRITE_BLOCK(sd->data_start, sd->data_offset);
+            sd->blk_written++;
+            sd->data_start += sd->blk_len;
+            sd->data_offset = 0;
             sd->csd[14] |= 0x40;
 
             /* Bzzzzzzztt .... Operation complete.  */