diff mbox series

[5.4,078/214] btrfs: only commit the delayed inode when doing a full fsync

Message ID 20200901150956.716711449@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH Sept. 1, 2020, 3:09 p.m. UTC
From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit 8c8648dd1f6d62aeb912deeb788b6ac33cb782e7 ]

Commit 2c2c452b0cafdc ("Btrfs: fix fsync when extend references are added
to an inode") forced a commit of the delayed inode when logging an inode
in order to ensure we would end up logging the inode item during a full
fsync. By committing the delayed inode, we updated the inode item in the
fs/subvolume tree and then later when copying items from leafs modified in
the current transaction into the log tree (with copy_inode_items_to_log())
we ended up copying the inode item from the fs/subvolume tree into the log
tree. Logging an up to date version of the inode item is required to make
sure at log replay time we get the link count fixup triggered among other
things (replay xattr deletes, etc). The test case generic/040 from fstests
exercises the bug which that commit fixed.

However for a fast fsync we don't need to commit the delayed inode because
we always log an up to date version of the inode item based on the struct
btrfs_inode we have in-memory. We started doing this for fast fsyncs since
commit e4545de5b035c7 ("Btrfs: fix fsync data loss after append write").

So just stop committing the delayed inode if we are doing a fast fsync,
we are only wasting time and adding contention on fs/subvolume tree.

This patch is part of a series that has the following patches:

1/4 btrfs: only commit the delayed inode when doing a full fsync
2/4 btrfs: only commit delayed items at fsync if we are logging a directory
3/4 btrfs: stop incremening log_batch for the log root tree when syncing log
4/4 btrfs: remove no longer needed use of log_writers for the log root tree

After the entire patchset applied I saw about 12% decrease on max latency
reported by dbench. The test was done on a qemu vm, with 8 cores, 16Gb of
ram, using kvm and using a raw NVMe device directly (no intermediary fs on
the host). The test was invoked like the following:

  mkfs.btrfs -f /dev/sdk
  mount -o ssd -o nospace_cache /dev/sdk /mnt/sdk
  dbench -D /mnt/sdk -t 300 8
  umount /mnt/dsk

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/tree-log.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index cc407c68d356f..0525b191843e1 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -5154,7 +5154,7 @@  static int btrfs_log_inode(struct btrfs_trans_handle *trans,
 	struct btrfs_key max_key;
 	struct btrfs_root *log = root->log_root;
 	int err = 0;
-	int ret;
+	int ret = 0;
 	bool fast_search = false;
 	u64 ino = btrfs_ino(inode);
 	struct extent_map_tree *em_tree = &inode->extent_tree;
@@ -5191,14 +5191,16 @@  static int btrfs_log_inode(struct btrfs_trans_handle *trans,
 
 	/*
 	 * Only run delayed items if we are a dir or a new file.
-	 * Otherwise commit the delayed inode only, which is needed in
-	 * order for the log replay code to mark inodes for link count
-	 * fixup (create temporary BTRFS_TREE_LOG_FIXUP_OBJECTID items).
+	 * Otherwise commit the delayed inode only if the full sync flag is set,
+	 * as we want to make sure an up to date version is in the subvolume
+	 * tree so copy_inode_items_to_log() / copy_items() can find it and copy
+	 * it to the log tree. For a non full sync, we always log the inode item
+	 * based on the in-memory struct btrfs_inode which is always up to date.
 	 */
 	if (S_ISDIR(inode->vfs_inode.i_mode) ||
 	    inode->generation > fs_info->last_trans_committed)
 		ret = btrfs_commit_inode_delayed_items(trans, inode);
-	else
+	else if (test_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &inode->runtime_flags))
 		ret = btrfs_commit_inode_delayed_inode(inode);
 
 	if (ret) {