diff mbox series

[5.9,267/757] cpufreq: qcom: Dont add frequencies without an OPP

Message ID 20201027135503.097951412@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman Oct. 27, 2020, 1:48 p.m. UTC 
From: Matthias Kaehlcke <mka@chromium.org>

[ Upstream commit bc9b9c5ab9d8d16157737db539929d57562926e9 ]

The driver currently adds all frequencies from the hardware LUT to
the cpufreq table, regardless of whether the corresponding OPP
exists. This prevents devices from disabling certain OPPs through
the device tree and can result in CPU frequencies for which the
interconnect bandwidth can't be adjusted. Only add frequencies
with an OPP entry.

Fixes: 55538fbc79e9 ("cpufreq: qcom: Read voltage LUT and populate OPP")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/qcom-cpufreq-hw.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 3fb044b907a83..47b7d394d2abb 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -177,10 +177,15 @@  static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 			freq = cpu_hw_rate / 1000;
 
 		if (freq != prev_freq && core_count != LUT_TURBO_IND) {
-			table[i].frequency = freq;
-			qcom_cpufreq_update_opp(cpu_dev, freq, volt);
-			dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i,
+			if (!qcom_cpufreq_update_opp(cpu_dev, freq, volt)) {
+				table[i].frequency = freq;
+				dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i,
 				freq, core_count);
+			} else {
+				dev_warn(cpu_dev, "failed to update OPP for freq=%d\n", freq);
+				table[i].frequency = CPUFREQ_ENTRY_INVALID;
+			}
+
 		} else if (core_count == LUT_TURBO_IND) {
 			table[i].frequency = CPUFREQ_ENTRY_INVALID;
 		}
@@ -197,9 +202,13 @@  static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
 			 * as the boost frequency
 			 */
 			if (prev->frequency == CPUFREQ_ENTRY_INVALID) {
-				prev->frequency = prev_freq;
-				prev->flags = CPUFREQ_BOOST_FREQ;
-				qcom_cpufreq_update_opp(cpu_dev, prev_freq, volt);
+				if (!qcom_cpufreq_update_opp(cpu_dev, prev_freq, volt)) {
+					prev->frequency = prev_freq;
+					prev->flags = CPUFREQ_BOOST_FREQ;
+				} else {
+					dev_warn(cpu_dev, "failed to update OPP for freq=%d\n",
+						 freq);
+				}
 			}
 
 			break;