diff mbox series

[v4,2/2] firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module

Message ID 20201030061242.92510-2-john.stultz@linaro.org
State Superseded
Headers show
Series None | expand

Commit Message

John Stultz Oct. 30, 2020, 6:12 a.m. UTC
Allow the qcom_scm driver to be loadable as a permenent module.

This still uses the "depends on QCOM_SCM || !QCOM_SCM" bit to
ensure that drivers that call into the qcom_scm driver are
also built as modules. While not ideal in some cases its the
only safe way I can find to avoid build errors without having
those drivers select QCOM_SCM and have to force it on (as
QCOM_SCM=n can be valid for those drivers).

Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-gpio@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
v3: Fix __arm_smccc_smc build issue reported by
    kernel test robot <lkp@intel.com>
v4: Add "depends on QCOM_SCM || !QCOM_SCM" bit to ath10k
    config that requires it.
---
 drivers/firmware/Kconfig                | 4 ++--
 drivers/firmware/Makefile               | 3 ++-
 drivers/firmware/qcom_scm.c             | 4 ++++
 drivers/iommu/Kconfig                   | 2 ++
 drivers/net/wireless/ath/ath10k/Kconfig | 1 +
 5 files changed, 11 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 3315e3c215864..5e369928bc567 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -235,8 +235,8 @@  config INTEL_STRATIX10_RSU
 	  Say Y here if you want Intel RSU support.
 
 config QCOM_SCM
-	bool
-	depends on ARM || ARM64
+	tristate "Qcom SCM driver"
+	depends on (ARM && HAVE_ARM_SMCCC) || ARM64
 	select RESET_CONTROLLER
 
 config QCOM_SCM_DOWNLOAD_MODE_DEFAULT
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 5e013b6a3692e..523173cbff335 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -17,7 +17,8 @@  obj-$(CONFIG_ISCSI_IBFT)	+= iscsi_ibft.o
 obj-$(CONFIG_FIRMWARE_MEMMAP)	+= memmap.o
 obj-$(CONFIG_RASPBERRYPI_FIRMWARE) += raspberrypi.o
 obj-$(CONFIG_FW_CFG_SYSFS)	+= qemu_fw_cfg.o
-obj-$(CONFIG_QCOM_SCM)		+= qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
+obj-$(CONFIG_QCOM_SCM)		+= qcom-scm.o
+qcom-scm-objs += qcom_scm.o qcom_scm-smc.o qcom_scm-legacy.o
 obj-$(CONFIG_TI_SCI_PROTOCOL)	+= ti_sci.o
 obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
 obj-$(CONFIG_TURRIS_MOX_RWTM)	+= turris-mox-rwtm.o
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 7be48c1bec96d..6f431b73e617d 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1280,6 +1280,7 @@  static const struct of_device_id qcom_scm_dt_match[] = {
 	{ .compatible = "qcom,scm" },
 	{}
 };
+MODULE_DEVICE_TABLE(of, qcom_scm_dt_match);
 
 static struct platform_driver qcom_scm_driver = {
 	.driver = {
@@ -1295,3 +1296,6 @@  static int __init qcom_scm_init(void)
 	return platform_driver_register(&qcom_scm_driver);
 }
 subsys_initcall(qcom_scm_init);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. SCM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 04878caf6da49..c64d7a2b65134 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -248,6 +248,7 @@  config SPAPR_TCE_IOMMU
 config ARM_SMMU
 	tristate "ARM Ltd. System MMU (SMMU) Support"
 	depends on ARM64 || ARM || (COMPILE_TEST && !GENERIC_ATOMIC64)
+	depends on QCOM_SCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y
 	select IOMMU_API
 	select IOMMU_IO_PGTABLE_LPAE
 	select ARM_DMA_USE_IOMMU if ARM
@@ -375,6 +376,7 @@  config QCOM_IOMMU
 	# Note: iommu drivers cannot (yet?) be built as modules
 	bool "Qualcomm IOMMU Support"
 	depends on ARCH_QCOM || (COMPILE_TEST && !GENERIC_ATOMIC64)
+	depends on QCOM_SCM=y
 	select IOMMU_API
 	select IOMMU_IO_PGTABLE_LPAE
 	select ARM_DMA_USE_IOMMU
diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index 40f91bc8514d8..a490e78890017 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -44,6 +44,7 @@  config ATH10K_SNOC
 	tristate "Qualcomm ath10k SNOC support"
 	depends on ATH10K
 	depends on ARCH_QCOM || COMPILE_TEST
+	depends on QCOM_QCM || !QCOM_SCM #if QCOM_SCM=m this can't be =y
 	select QCOM_QMI_HELPERS
 	help
 	  This module adds support for integrated WCN3990 chip connected