@@ -38,8 +38,7 @@
#include <asm/mach/flash.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <linux/platform_data/gpmc-omap.h>
-#include <asm/gpio.h>
-
+#include <linux/gpio.h>
#include <linux/omap-dma.h>
#define DRIVER_NAME "omap2-onenand"
@@ -835,6 +834,7 @@ static int omap2_onenand_probe(struct platform_device *pdev)
int r;
struct resource *res;
struct mtd_part_parser_data ppdata = {};
+ struct device *dev = &pdev->dev;
pdata = dev_get_platdata(&pdev->dev);
if (pdata == NULL) {
@@ -842,7 +842,7 @@ static int omap2_onenand_probe(struct platform_device *pdev)
return -ENODEV;
}
- c = kzalloc(sizeof(struct omap2_onenand), GFP_KERNEL);
+ c = devm_kzalloc(dev, sizeof(struct omap2_onenand), GFP_KERNEL);
if (!c)
return -ENOMEM;
@@ -855,50 +855,40 @@ static int omap2_onenand_probe(struct platform_device *pdev)
c->dma_channel = pdata->dma_channel;
if (c->dma_channel < 0) {
/* if -1, don't use DMA */
- c->gpio_irq = 0;
+ c->gpio_irq = -EINVAL;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL) {
- r = -EINVAL;
- dev_err(&pdev->dev, "error getting memory resource\n");
- goto err_kfree;
- }
+ c->onenand.base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(c->onenand.base))
+ return PTR_ERR(c->onenand.base);
c->phys_base = res->start;
c->mem_size = resource_size(res);
- if (request_mem_region(c->phys_base, c->mem_size,
- pdev->dev.driver->name) == NULL) {
- dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, size: 0x%x\n",
- c->phys_base, c->mem_size);
- r = -EBUSY;
- goto err_kfree;
- }
- c->onenand.base = ioremap(c->phys_base, c->mem_size);
- if (c->onenand.base == NULL) {
- r = -ENOMEM;
- goto err_release_mem_region;
- }
-
r = omap2_onenand_setup(c);
- if (r < 0) {
- dev_err(&pdev->dev, "setup failed:%d\n", r);
- goto err_iounmap;
- }
+ if (r)
+ return -ENODEV;
- if (c->gpio_irq) {
- if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) {
- dev_err(&pdev->dev, "Failed to request GPIO%d for "
- "OneNAND\n", c->gpio_irq);
- goto err_iounmap;
- }
- gpio_direction_input(c->gpio_irq);
+ if (gpio_is_valid(c->gpio_irq)) {
+ r = devm_gpio_request(dev, c->gpio_irq, "OneNAND irq");
+ if (r) {
+ dev_err(dev, "Failed to request GPIO %d",
+ c->gpio_irq);
+ return r;
+ }
+
+ gpio_direction_input(c->gpio_irq);
- if ((r = request_irq(gpio_to_irq(c->gpio_irq),
- omap2_onenand_interrupt, IRQF_TRIGGER_RISING,
- pdev->dev.driver->name, c)) < 0)
- goto err_release_gpio;
+ r = devm_request_irq(dev, gpio_to_irq(c->gpio_irq),
+ omap2_onenand_interrupt,
+ IRQF_TRIGGER_RISING,
+ pdev->dev.driver->name, c);
+ if (r) {
+ dev_err(dev, "failed to request IRQ %d:%d\n",
+ c->gpio_irq, r);
+ return r;
+ }
}
if (c->dma_channel >= 0) {
@@ -915,9 +905,8 @@ static int omap2_onenand_probe(struct platform_device *pdev)
omap_set_dma_dest_burst_mode(c->dma_channel,
OMAP_DMA_DATA_BURST_8);
} else {
- dev_info(&pdev->dev,
- "failed to allocate DMA for OneNAND, "
- "using PIO instead\n");
+ dev_info(dev,
+ "failed to allocate DMA for OneNAND, using PIO instead\n");
c->dma_channel = -1;
}
}
@@ -947,8 +936,11 @@ static int omap2_onenand_probe(struct platform_device *pdev)
if (pdata->skip_initial_unlocking)
this->options |= ONENAND_SKIP_INITIAL_UNLOCKING;
- if ((r = onenand_scan(&c->mtd, 1)) < 0)
+ r = onenand_scan(&c->mtd, 1);
+ if (r) {
+ dev_err(dev, "OneNAND scan failed :%d\n", r);
goto err_release_dma;
+ }
ppdata.of_node = pdata->of_node;
r = mtd_device_parse_register(&c->mtd, NULL, &ppdata,
@@ -966,17 +958,6 @@ err_release_onenand:
err_release_dma:
if (c->dma_channel != -1)
omap_free_dma(c->dma_channel);
- if (c->gpio_irq)
- free_irq(gpio_to_irq(c->gpio_irq), c);
-err_release_gpio:
- if (c->gpio_irq)
- gpio_free(c->gpio_irq);
-err_iounmap:
- iounmap(c->onenand.base);
-err_release_mem_region:
- release_mem_region(c->phys_base, c->mem_size);
-err_kfree:
- kfree(c);
return r;
}
@@ -989,13 +970,6 @@ static int omap2_onenand_remove(struct platform_device *pdev)
if (c->dma_channel != -1)
omap_free_dma(c->dma_channel);
omap2_onenand_shutdown(pdev);
- if (c->gpio_irq) {
- free_irq(gpio_to_irq(c->gpio_irq), c);
- gpio_free(c->gpio_irq);
- }
- iounmap(c->onenand.base);
- release_mem_region(c->phys_base, c->mem_size);
- kfree(c);
return 0;
}
Use devres managed resources for Memory, GPIO and Interrupt resources. 0 is a valid gpio, so use gpio_is_valid() to check for valid gpio number. Signed-off-by: Roger Quadros <rogerq@ti.com> --- drivers/mtd/onenand/omap2.c | 92 ++++++++++++++++----------------------------- 1 file changed, 33 insertions(+), 59 deletions(-)