diff mbox

[V3,03/16] irqchip: crossbar: introduce ti,irqs-skip to skip

Message ID 1402917796-31574-4-git-send-email-r.sricharan@ti.com
State New
Headers show

Commit Message

Sricharan R June 16, 2014, 11:23 a.m. UTC
From: Nishanth Menon <nm@ti.com>

When, in the system due to varied reasons, interrupts might be unusable
due to hardware behavior, but register maps do exist, then those interrupts
should be skipped while mapping irq to crossbars.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sricharan R <r.sricharan@ti.com>
---
[V3] introduced ti,irqs-skip dt property to list the
     irqs to be skipped.

 .../devicetree/bindings/arm/omap/crossbar.txt      |    4 ++++
 drivers/irqchip/irq-crossbar.c                     |   20 ++++++++++++++++++++
 2 files changed, 24 insertions(+)

Comments

Jason Cooper June 21, 2014, 2:33 a.m. UTC | #1
Sricharan,

Your subject line seems truncated:

  "irqchip: crossbar: introduce ti,irqs-skip to skip"

maybe "... Introduce DT property to skip hardwired irqs" ?

Also note that you need to correct the subject line for *every* patch in
the series wrt capitalization.

I don't mind correcting it when I apply it, provided that:

 - the patch is otherwise ready
 - I only have to do it once or twice for the series
 - I never had a chance to ask since you created a rockstar patch series
   the first time out of the gate (except for capitalization).

Once I've looked over the whole series, please resend with the subject
lines corrected.

On Mon, Jun 16, 2014 at 04:53:03PM +0530, Sricharan R wrote:
> From: Nishanth Menon <nm@ti.com>
> 
> When, in the system due to varied reasons, interrupts might be unusable
> due to hardware behavior, but register maps do exist, then those interrupts
> should be skipped while mapping irq to crossbars.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Sricharan R <r.sricharan@ti.com>
> ---
> [V3] introduced ti,irqs-skip dt property to list the
>      irqs to be skipped.
> 
>  .../devicetree/bindings/arm/omap/crossbar.txt      |    4 ++++
>  drivers/irqchip/irq-crossbar.c                     |   20 ++++++++++++++++++++
>  2 files changed, 24 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
> index fb88585..cfcbd52 100644
> --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
> +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
> @@ -17,6 +17,10 @@ Required properties:
>  		 so crossbar bar driver should not consider them as free
>  		 lines.
>  
> +Optional properties:
> +- ti,irqs-skip: This is similar to "ti,irqs-reserved", but are irq mappings
> +  which are not supposed to be used for errata or other reasons(virtualization).

I would specifically mention SoC-specific hard-wiring of irqs here.
Also the fact that the hardwiring unexpectedly bypasses the crossbar.

> +
>  Examples:
>  		crossbar_mpu: @4a020000 {
>  			compatible = "ti,irq-crossbar";

Please include a ti,irqs-skip example here.

> diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c
> index 51d4b87..27049de 100644
> --- a/drivers/irqchip/irq-crossbar.c
> +++ b/drivers/irqchip/irq-crossbar.c
> @@ -18,6 +18,7 @@
>  
>  #define IRQ_FREE	-1
>  #define IRQ_RESERVED	-2
> +#define IRQ_SKIP	-3
>  #define GIC_IRQ_START	32
>  
>  /*
> @@ -160,6 +161,25 @@ static int __init crossbar_of_init(struct device_node *node)
>  		}
>  	}
>  
> +	/* Skip the ones marked as skip */

This comment is redundant, perhaps "Skip irqs hardwired to bypass the
crossbar."?

> +	irqsr = of_get_property(node, "ti,irqs-skip", &size);
> +	if (irqsr) {
> +		size /= sizeof(__be32);
> +
> +		for (i = 0; i < size; i++) {
> +			of_property_read_u32_index(node,
> +						   "ti,irqs-skip",
> +						   i, &entry);
> +			if (entry > max) {
> +				pr_err("Invalid skip entry\n");
> +				ret = -EINVAL;
> +				goto err3;
> +			}
> +			cb->irq_map[entry] = IRQ_SKIP;
> +		}
> +	}
> +
> +
>  	cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL);
>  	if (!cb->register_offsets)
>  		goto err3;

thx,

Jason.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sricharan R June 23, 2014, 7:20 a.m. UTC | #2
On Saturday 21 June 2014 08:03 AM, Jason Cooper wrote:
> Sricharan,
> 
> Your subject line seems truncated:
> 
>   "irqchip: crossbar: introduce ti,irqs-skip to skip"
> 
> maybe "... Introduce DT property to skip hardwired irqs" ?
> 
> Also note that you need to correct the subject line for *every* patch in
> the series wrt capitalization.
> 
> I don't mind correcting it when I apply it, provided that:
> 
ha, i think this got truncated unintentionally. Sorry will fix this.
>  - the patch is otherwise ready
>  - I only have to do it once or twice for the series
>  - I never had a chance to ask since you created a rockstar patch series
>    the first time out of the gate (except for capitalization).
> 
> Once I've looked over the whole series, please resend with the subject
> lines corrected.
> 
Ok. I will look for your comments on the rest of the patches and
resend with capitalization fix said above.

> On Mon, Jun 16, 2014 at 04:53:03PM +0530, Sricharan R wrote:
>> From: Nishanth Menon <nm@ti.com>
>>
>> When, in the system due to varied reasons, interrupts might be unusable
>> due to hardware behavior, but register maps do exist, then those interrupts
>> should be skipped while mapping irq to crossbars.
>>
>> Signed-off-by: Nishanth Menon <nm@ti.com>
>> Signed-off-by: Sricharan R <r.sricharan@ti.com>
>> ---
>> [V3] introduced ti,irqs-skip dt property to list the
>>      irqs to be skipped.
>>
>>  .../devicetree/bindings/arm/omap/crossbar.txt      |    4 ++++
>>  drivers/irqchip/irq-crossbar.c                     |   20 ++++++++++++++++++++
>>  2 files changed, 24 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
>> index fb88585..cfcbd52 100644
>> --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
>> +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
>> @@ -17,6 +17,10 @@ Required properties:
>>  		 so crossbar bar driver should not consider them as free
>>  		 lines.
>>  
>> +Optional properties:
>> +- ti,irqs-skip: This is similar to "ti,irqs-reserved", but are irq mappings
>> +  which are not supposed to be used for errata or other reasons(virtualization).
> 
> I would specifically mention SoC-specific hard-wiring of irqs here.
> Also the fact that the hardwiring unexpectedly bypasses the crossbar.
ok, that will be more easily understandable and will add that.
> 
>> +
>>  Examples:
>>  		crossbar_mpu: @4a020000 {
>>  			compatible = "ti,irq-crossbar";
> 
> Please include a ti,irqs-skip example here.
> 
ok.
>> diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c
>> index 51d4b87..27049de 100644
>> --- a/drivers/irqchip/irq-crossbar.c
>> +++ b/drivers/irqchip/irq-crossbar.c
>> @@ -18,6 +18,7 @@
>>  
>>  #define IRQ_FREE	-1
>>  #define IRQ_RESERVED	-2
>> +#define IRQ_SKIP	-3
>>  #define GIC_IRQ_START	32
>>  
>>  /*
>> @@ -160,6 +161,25 @@ static int __init crossbar_of_init(struct device_node *node)
>>  		}
>>  	}
>>  
>> +	/* Skip the ones marked as skip */
> 
> This comment is redundant, perhaps "Skip irqs hardwired to bypass the
> crossbar."?
ok, will change this.

Regards,
 Sricharan
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
index fb88585..cfcbd52 100644
--- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -17,6 +17,10 @@  Required properties:
 		 so crossbar bar driver should not consider them as free
 		 lines.
 
+Optional properties:
+- ti,irqs-skip: This is similar to "ti,irqs-reserved", but are irq mappings
+  which are not supposed to be used for errata or other reasons(virtualization).
+
 Examples:
 		crossbar_mpu: @4a020000 {
 			compatible = "ti,irq-crossbar";
diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c
index 51d4b87..27049de 100644
--- a/drivers/irqchip/irq-crossbar.c
+++ b/drivers/irqchip/irq-crossbar.c
@@ -18,6 +18,7 @@ 
 
 #define IRQ_FREE	-1
 #define IRQ_RESERVED	-2
+#define IRQ_SKIP	-3
 #define GIC_IRQ_START	32
 
 /*
@@ -160,6 +161,25 @@  static int __init crossbar_of_init(struct device_node *node)
 		}
 	}
 
+	/* Skip the ones marked as skip */
+	irqsr = of_get_property(node, "ti,irqs-skip", &size);
+	if (irqsr) {
+		size /= sizeof(__be32);
+
+		for (i = 0; i < size; i++) {
+			of_property_read_u32_index(node,
+						   "ti,irqs-skip",
+						   i, &entry);
+			if (entry > max) {
+				pr_err("Invalid skip entry\n");
+				ret = -EINVAL;
+				goto err3;
+			}
+			cb->irq_map[entry] = IRQ_SKIP;
+		}
+	}
+
+
 	cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL);
 	if (!cb->register_offsets)
 		goto err3;