diff mbox series

[22/30] net: usb: r8152: Provide missing documentation for some struct members

Message ID 20201102114512.1062724-23-lee.jones@linaro.org
State New
Headers show
Series None | expand

Commit Message

Lee Jones Nov. 2, 2020, 11:45 a.m. UTC
Fixes the following W=1 kernel build warning(s):

 drivers/net/usb/r8152.c:934: warning: Function parameter or member 'blk_hdr' not described in 'fw_mac'
 drivers/net/usb/r8152.c:934: warning: Function parameter or member 'reserved' not described in 'fw_mac'
 drivers/net/usb/r8152.c:947: warning: Function parameter or member 'blk_hdr' not described in 'fw_phy_patch_key'
 drivers/net/usb/r8152.c:947: warning: Function parameter or member 'reserved' not described in 'fw_phy_patch_key'
 drivers/net/usb/r8152.c:986: warning: Function parameter or member 'blk_hdr' not described in 'fw_phy_nc'
 drivers/net/usb/r8152.c:986: warning: Function parameter or member 'mode_pre' not described in 'fw_phy_nc'
 drivers/net/usb/r8152.c:986: warning: Function parameter or member 'mode_post' not described in 'fw_phy_nc'
 drivers/net/usb/r8152.c:986: warning: Function parameter or member 'reserved' not described in 'fw_phy_nc'

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Hayes Wang <hayeswang@realtek.com>
Cc: nic maintainers <nic_swsd@realtek.com>
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>

---
 drivers/net/usb/r8152.c | 6 ++++++
 1 file changed, 6 insertions(+)

-- 
2.25.1
diff mbox series

Patch

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index b1770489aca51..cebe2dc15c3f0 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -898,6 +898,7 @@  struct fw_header {
  * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
  *	The layout of the firmware block is:
  *	<struct fw_mac> + <info> + <firmware data>.
+ * @blk_hdr: firmware descriptor (type, length)
  * @fw_offset: offset of the firmware binary data. The start address of
  *	the data would be the address of struct fw_mac + @fw_offset.
  * @fw_reg: the register to load the firmware. Depends on chip.
@@ -911,6 +912,7 @@  struct fw_header {
  * @bp_num: the break point number which needs to be set for this firmware.
  *	Depends on the firmware.
  * @bp: break points. Depends on firmware.
+ * @reserved: reserved space (unused)
  * @fw_ver_reg: the register to store the fw version.
  * @fw_ver_data: the firmware version of the current type.
  * @info: additional information for debugging, and is followed by the
@@ -936,8 +938,10 @@  struct fw_mac {
 /**
  * struct fw_phy_patch_key - a firmware block used by RTL_FW_PHY_START.
  *	This is used to set patch key when loading the firmware of PHY.
+ * @blk_hdr: firmware descriptor (type, length)
  * @key_reg: the register to write the patch key.
  * @key_data: patch key.
+ * @reserved: reserved space (unused)
  */
 struct fw_phy_patch_key {
 	struct fw_block blk_hdr;
@@ -950,6 +954,7 @@  struct fw_phy_patch_key {
  * struct fw_phy_nc - a firmware block used by RTL_FW_PHY_NC.
  *	The layout of the firmware block is:
  *	<struct fw_phy_nc> + <info> + <firmware data>.
+ * @blk_hdr: firmware descriptor (type, length)
  * @fw_offset: offset of the firmware binary data. The start address of
  *	the data would be the address of struct fw_phy_nc + @fw_offset.
  * @fw_reg: the register to load the firmware. Depends on chip.
@@ -960,6 +965,7 @@  struct fw_phy_patch_key {
  * @mode_reg: the regitster of switching the mode.
  * @mod_pre: the mode needing to be set before loading the firmware.
  * @mod_post: the mode to be set when finishing to load the firmware.
+ * @reserved: reserved space (unused)
  * @bp_start: the start register of break points. Depends on chip.
  * @bp_num: the break point number which needs to be set for this firmware.
  *	Depends on the firmware.