diff mbox series

[10/10] dt-bindings: net: dsa: b53: Add YAML bindings

Message ID 20201110033113.31090-11-f.fainelli@gmail.com
State Accepted
Commit ab7eff24a1e993b649d0383ec831a7fab30fe369
Headers show
Series None | expand

Commit Message

Florian Fainelli Nov. 10, 2020, 3:31 a.m. UTC
From: Kurt Kanzenbach <kurt@kmk-computers.de>

Convert the b53 DSA device tree bindings to YAML in order to allow
for automatic checking and such.

Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
---
 .../devicetree/bindings/net/dsa/b53.txt       | 149 -----------
 .../devicetree/bindings/net/dsa/b53.yaml      | 249 ++++++++++++++++++
 MAINTAINERS                                   |   2 +-
 3 files changed, 250 insertions(+), 150 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/dsa/b53.txt
 create mode 100644 Documentation/devicetree/bindings/net/dsa/b53.yaml

Comments

Kurt Kanzenbach Nov. 10, 2020, 1:21 p.m. UTC | #1
On Mon Nov 09 2020, Florian Fainelli wrote:
> From: Kurt Kanzenbach <kurt@kmk-computers.de>
>
> Convert the b53 DSA device tree bindings to YAML in order to allow
> for automatic checking and such.
>
> Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
> Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
> ---
>  .../devicetree/bindings/net/dsa/b53.txt       | 149 -----------
>  .../devicetree/bindings/net/dsa/b53.yaml      | 249 ++++++++++++++++++

Maybe it should be renamed to brcm,b53.yaml to be consistent with the
ksz and hellcreek bindings.

Thanks,
Kurt
Florian Fainelli Nov. 10, 2020, 3:46 p.m. UTC | #2
On 11/10/2020 5:21 AM, Kurt Kanzenbach wrote:
> On Mon Nov 09 2020, Florian Fainelli wrote:

>> From: Kurt Kanzenbach <kurt@kmk-computers.de>

>>

>> Convert the b53 DSA device tree bindings to YAML in order to allow

>> for automatic checking and such.

>>

>> Suggested-by: Florian Fainelli <f.fainelli@gmail.com>

>> Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>

>> ---

>>  .../devicetree/bindings/net/dsa/b53.txt       | 149 -----------

>>  .../devicetree/bindings/net/dsa/b53.yaml      | 249 ++++++++++++++++++

> 

> Maybe it should be renamed to brcm,b53.yaml to be consistent with the

> ksz and hellcreek bindings.


Certainly.
-- 
Florian
Vladimir Oltean Nov. 10, 2020, 10:43 p.m. UTC | #3
On Mon, Nov 09, 2020 at 07:31:13PM -0800, Florian Fainelli wrote:
> diff --git a/Documentation/devicetree/bindings/net/dsa/b53.yaml b/Documentation/devicetree/bindings/net/dsa/b53.yaml
> new file mode 100644
> index 000000000000..4fcbac1de95b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/dsa/b53.yaml
> @@ -0,0 +1,249 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/dsa/b53.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM53xx Ethernet switches
> +
> +allOf:
> +  - $ref: dsa.yaml#
> +
> +maintainers:
> +  - Florian Fainelli <f.fainelli@gmail.com>
> +
> +description:
> +  Broadcom BCM53xx Ethernet switches
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: brcm,bcm5325
> +      - const: brcm,bcm53115
> +      - const: brcm,bcm53125
> +      - const: brcm,bcm53128
> +      - const: brcm,bcm5365
> +      - const: brcm,bcm5395
> +      - const: brcm,bcm5389
> +      - const: brcm,bcm5397
> +      - const: brcm,bcm5398
> +      - items:
> +          - const: brcm,bcm11360-srab
> +          - const: brcm,cygnus-srab
> +      - items:
> +          - enum:
> +              - brcm,bcm53010-srab
> +              - brcm,bcm53011-srab
> +              - brcm,bcm53012-srab
> +              - brcm,bcm53018-srab
> +              - brcm,bcm53019-srab
> +          - const: brcm,bcm5301x-srab
> +      - items:
> +          - enum:
> +              - brcm,bcm11404-srab
> +              - brcm,bcm11407-srab
> +              - brcm,bcm11409-srab
> +              - brcm,bcm58310-srab
> +              - brcm,bcm58311-srab
> +              - brcm,bcm58313-srab
> +          - const: brcm,omega-srab
> +      - items:
> +          - enum:
> +              - brcm,bcm58522-srab
> +              - brcm,bcm58523-srab
> +              - brcm,bcm58525-srab
> +              - brcm,bcm58622-srab
> +              - brcm,bcm58623-srab
> +              - brcm,bcm58625-srab
> +              - brcm,bcm88312-srab
> +          - const: brcm,nsp-srab
> +      - items:
> +          - enum:
> +              - brcm,bcm3384-switch
> +              - brcm,bcm6328-switch
> +              - brcm,bcm6368-switch
> +          - const: brcm,bcm63xx-switch
> +
> +required:
> +  - compatible
> +  - reg
> +
> +# BCM585xx/586xx/88312 SoCs
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - brcm,bcm58522-srab
> +          - brcm,bcm58523-srab
> +          - brcm,bcm58525-srab
> +          - brcm,bcm58622-srab
> +          - brcm,bcm58623-srab
> +          - brcm,bcm58625-srab
> +          - brcm,bcm88312-srab
> +then:
> +  properties:
> +    reg:
> +      minItems: 3
> +      maxItems: 3
> +    reg-names:
> +      items:
> +        - const: srab
> +        - const: mux_config
> +        - const: sgmii_config

I am only reading these with a human eye, I don't parse YAML syntax.
Does the syntax enforce that these reg-names are declared in this
precise order, which is necessary for the proper operation of the
driver?

> +    interrupts:
> +      minItems: 13
> +      maxItems: 13
> +    interrupt-names:
> +      items:
> +        - const: link_state_p0
> +        - const: link_state_p1
> +        - const: link_state_p2
> +        - const: link_state_p3
> +        - const: link_state_p4
> +        - const: link_state_p5
> +        - const: link_state_p7
> +        - const: link_state_p8
> +        - const: phy
> +        - const: ts
> +        - const: imp_sleep_timer_p5
> +        - const: imp_sleep_timer_p7
> +        - const: imp_sleep_timer_p8
> +  required:
> +    - interrupts
> +else:
> +  properties:
> +    reg:
> +      maxItems: 1
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    mdio {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        switch@1e {

You have renamed a node called 'ethernet-switch' into one called
'switch'. Was it deliberate?

> +            compatible = "brcm,bcm53125";
> +            reg = <30>;
> +
> +            ethernet-ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    label = "lan1";
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +                    label = "lan2";
> +                };
> +
> +                port@5 {
> +                    reg = <5>;
> +                    label = "cable-modem";
> +                    phy-mode = "rgmii-txid";
> +                    fixed-link {
> +                        speed = <1000>;
> +                        full-duplex;
> +                    };
> +                };
> +
> +                port@8 {
> +                    reg = <8>;
> +                    label = "cpu";
> +                    phy-mode = "rgmii-txid";
> +                    ethernet = <&eth0>;
> +                    fixed-link {
> +                        speed = <1000>;
> +                        full-duplex;
> +                    };
> +                };
> +            };
> +        };
> +    };
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    axi {
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +
> +        switch@36000 {
> +            compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
> +            reg = <0x36000 0x1000>,
> +                  <0x3f308 0x8>,
> +                  <0x3f410 0xc>;
> +            reg-names = "srab", "mux_config", "sgmii_config";
> +            interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "link_state_p0",
> +                              "link_state_p1",
> +                              "link_state_p2",
> +                              "link_state_p3",
> +                              "link_state_p4",
> +                              "link_state_p5",
> +                              "link_state_p7",
> +                              "link_state_p8",
> +                              "phy",
> +                              "ts",
> +                              "imp_sleep_timer_p5",
> +                              "imp_sleep_timer_p7",
> +                              "imp_sleep_timer_p8";
> +
> +            ethernet-ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    label = "port0";
> +                    reg = <0>;
> +                };
> +
> +                port@1 {
> +                    label = "port1";
> +                    reg = <1>;
> +                };
> +
> +                port@2 {
> +                    label = "port2";
> +                    reg = <2>;
> +                };
> +
> +                port@3 {
> +                    label = "port3";
> +                    reg = <3>;
> +                };
> +
> +                port@4 {
> +                    label = "port4";
> +                    reg = <4>;
> +                };
> +
> +                port@8 {
> +                    ethernet = <&amac2>;
> +                    label = "cpu";
> +                    reg = <8>;
> +                    fixed-link {
> +                        speed = <1000>;
> +                        full-duplex;
> +                    };
> +                };
> +            };
> +        };
> +    };
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt
deleted file mode 100644
index f1487a751b1a..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/b53.txt
+++ /dev/null
@@ -1,149 +0,0 @@ 
-Broadcom BCM53xx Ethernet switches
-==================================
-
-Required properties:
-
-- compatible: For external switch chips, compatible string must be exactly one
-  of: "brcm,bcm5325"
-      "brcm,bcm53115"
-      "brcm,bcm53125"
-      "brcm,bcm53128"
-      "brcm,bcm5365"
-      "brcm,bcm5395"
-      "brcm,bcm5389"
-      "brcm,bcm5397"
-      "brcm,bcm5398"
-
-  For the BCM11360 SoC, must be:
-      "brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string
-
-  For the BCM5310x SoCs with an integrated switch, must be one of:
-      "brcm,bcm53010-srab"
-      "brcm,bcm53011-srab"
-      "brcm,bcm53012-srab"
-      "brcm,bcm53018-srab"
-      "brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string
-
-  For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of:
-      "brcm,bcm11404-srab"
-      "brcm,bcm11407-srab"
-      "brcm,bcm11409-srab"
-      "brcm,bcm58310-srab"
-      "brcm,bcm58311-srab"
-      "brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string
-
-  For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of:
-      "brcm,bcm58522-srab"
-      "brcm,bcm58523-srab"
-      "brcm,bcm58525-srab"
-      "brcm,bcm58622-srab"
-      "brcm,bcm58623-srab"
-      "brcm,bcm58625-srab"
-      "brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string
-
-  For the BCM63xx/33xx SoCs with an integrated switch, must be one of:
-      "brcm,bcm3384-switch"
-      "brcm,bcm6328-switch"
-      "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
-
-Required properties for BCM585xx/586xx/88312 SoCs:
-
- - reg: a total of 3 register base addresses, the first one must be the
-   Switch Register Access block base, the second is the port 5/4 mux
-   configuration register and the third one is the SGMII configuration
-   and status register base address.
-
- - interrupts: a total of 13 interrupts must be specified, in the following
-   order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
-   then the timestamping interrupt and the sleep timer interrupts for ports
-   5,7,8.
-
-Optional properties for BCM585xx/586xx/88312 SoCs:
-
-  - reg-names: a total of 3 names matching the 3 base register address, must
-    be in the following order:
-	"srab"
-	"mux_config"
-	"sgmii_config"
-
-  - interrupt-names: a total of 13 names matching the 13 interrupts specified
-    must be in the following order:
-	"link_state_p0"
-	"link_state_p1"
-	"link_state_p2"
-	"link_state_p3"
-	"link_state_p4"
-	"link_state_p5"
-	"link_state_p7"
-	"link_state_p8"
-	"phy"
-	"ts"
-	"imp_sleep_timer_p5"
-	"imp_sleep_timer_p7"
-	"imp_sleep_timer_p8"
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required and optional properties.
-
-Examples:
-
-Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
-
-	eth0: ethernet@10001000 {
-		compatible = "brcm,unimac";
-		reg = <0x10001000 0x1000>;
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-		};
-	};
-
-	mdio0: mdio@10000000 {
-		compatible = "brcm,unimac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch0: ethernet-switch@1e {
-			compatible = "brcm,bcm53125";
-			reg = <30>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port0@0 {
-					reg = <0>;
-					label = "lan1";
-				};
-
-				port1@1 {
-					reg = <1>;
-					label = "lan2";
-				};
-
-				port5@5 {
-					reg = <5>;
-					label = "cable-modem";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-					phy-mode = "rgmii-txid";
-				};
-
-				port8@8 {
-					reg = <8>;
-					label = "cpu";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-					phy-mode = "rgmii-txid";
-					ethernet = <&eth0>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/dsa/b53.yaml b/Documentation/devicetree/bindings/net/dsa/b53.yaml
new file mode 100644
index 000000000000..4fcbac1de95b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/b53.yaml
@@ -0,0 +1,249 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/b53.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM53xx Ethernet switches
+
+allOf:
+  - $ref: dsa.yaml#
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description:
+  Broadcom BCM53xx Ethernet switches
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,bcm5325
+      - const: brcm,bcm53115
+      - const: brcm,bcm53125
+      - const: brcm,bcm53128
+      - const: brcm,bcm5365
+      - const: brcm,bcm5395
+      - const: brcm,bcm5389
+      - const: brcm,bcm5397
+      - const: brcm,bcm5398
+      - items:
+          - const: brcm,bcm11360-srab
+          - const: brcm,cygnus-srab
+      - items:
+          - enum:
+              - brcm,bcm53010-srab
+              - brcm,bcm53011-srab
+              - brcm,bcm53012-srab
+              - brcm,bcm53018-srab
+              - brcm,bcm53019-srab
+          - const: brcm,bcm5301x-srab
+      - items:
+          - enum:
+              - brcm,bcm11404-srab
+              - brcm,bcm11407-srab
+              - brcm,bcm11409-srab
+              - brcm,bcm58310-srab
+              - brcm,bcm58311-srab
+              - brcm,bcm58313-srab
+          - const: brcm,omega-srab
+      - items:
+          - enum:
+              - brcm,bcm58522-srab
+              - brcm,bcm58523-srab
+              - brcm,bcm58525-srab
+              - brcm,bcm58622-srab
+              - brcm,bcm58623-srab
+              - brcm,bcm58625-srab
+              - brcm,bcm88312-srab
+          - const: brcm,nsp-srab
+      - items:
+          - enum:
+              - brcm,bcm3384-switch
+              - brcm,bcm6328-switch
+              - brcm,bcm6368-switch
+          - const: brcm,bcm63xx-switch
+
+required:
+  - compatible
+  - reg
+
+# BCM585xx/586xx/88312 SoCs
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm58522-srab
+          - brcm,bcm58523-srab
+          - brcm,bcm58525-srab
+          - brcm,bcm58622-srab
+          - brcm,bcm58623-srab
+          - brcm,bcm58625-srab
+          - brcm,bcm88312-srab
+then:
+  properties:
+    reg:
+      minItems: 3
+      maxItems: 3
+    reg-names:
+      items:
+        - const: srab
+        - const: mux_config
+        - const: sgmii_config
+    interrupts:
+      minItems: 13
+      maxItems: 13
+    interrupt-names:
+      items:
+        - const: link_state_p0
+        - const: link_state_p1
+        - const: link_state_p2
+        - const: link_state_p3
+        - const: link_state_p4
+        - const: link_state_p5
+        - const: link_state_p7
+        - const: link_state_p8
+        - const: phy
+        - const: ts
+        - const: imp_sleep_timer_p5
+        - const: imp_sleep_timer_p7
+        - const: imp_sleep_timer_p8
+  required:
+    - interrupts
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@1e {
+            compatible = "brcm,bcm53125";
+            reg = <30>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@5 {
+                    reg = <5>;
+                    label = "cable-modem";
+                    phy-mode = "rgmii-txid";
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+
+                port@8 {
+                    reg = <8>;
+                    label = "cpu";
+                    phy-mode = "rgmii-txid";
+                    ethernet = <&eth0>;
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    axi {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        switch@36000 {
+            compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
+            reg = <0x36000 0x1000>,
+                  <0x3f308 0x8>,
+                  <0x3f410 0xc>;
+            reg-names = "srab", "mux_config", "sgmii_config";
+            interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "link_state_p0",
+                              "link_state_p1",
+                              "link_state_p2",
+                              "link_state_p3",
+                              "link_state_p4",
+                              "link_state_p5",
+                              "link_state_p7",
+                              "link_state_p8",
+                              "phy",
+                              "ts",
+                              "imp_sleep_timer_p5",
+                              "imp_sleep_timer_p7",
+                              "imp_sleep_timer_p8";
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    label = "port0";
+                    reg = <0>;
+                };
+
+                port@1 {
+                    label = "port1";
+                    reg = <1>;
+                };
+
+                port@2 {
+                    label = "port2";
+                    reg = <2>;
+                };
+
+                port@3 {
+                    label = "port3";
+                    reg = <3>;
+                };
+
+                port@4 {
+                    label = "port4";
+                    reg = <4>;
+                };
+
+                port@8 {
+                    ethernet = <&amac2>;
+                    label = "cpu";
+                    reg = <8>;
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 3da6d8c154e4..d2e2ea9eb527 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3377,7 +3377,7 @@  M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	netdev@vger.kernel.org
 L:	openwrt-devel@lists.openwrt.org (subscribers-only)
 S:	Supported
-F:	Documentation/devicetree/bindings/net/dsa/b53.txt
+F:	Documentation/devicetree/bindings/net/dsa/b53.yaml
 F:	drivers/net/dsa/b53/*
 F:	include/linux/platform_data/b53.h