Message ID | 20201109170431.5687732e@xhacker.debian |
---|---|
State | Accepted |
Commit | 43ffe817bfe3871ffbaa1e98952a2a01b140e71e |
Headers | show |
Series | None | expand |
On Mon, Nov 09, 2020 at 05:04:31PM +0800, Jisheng Zhang wrote: > This is to remove similar errors as below: > > OF: /.../gpio-port@0: could not find phandle > > Commit 7569486d79ae ("gpio: dwapb: Add ngpios DT-property support") > explained the reason of above errors well and added the generic > "ngpios" property, let's use it. > > Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Thanks, Mani > --- > arch/arm64/boot/dts/bitmain/bm1880.dtsi | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi > index fa6e6905f588..53a9b76057aa 100644 > --- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi > +++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi > @@ -127,7 +127,7 @@ porta: gpio-controller@0 { > compatible = "snps,dw-apb-gpio-port"; > gpio-controller; > #gpio-cells = <2>; > - snps,nr-gpios = <32>; > + ngpios = <32>; > reg = <0>; > interrupt-controller; > #interrupt-cells = <2>; > @@ -145,7 +145,7 @@ portb: gpio-controller@0 { > compatible = "snps,dw-apb-gpio-port"; > gpio-controller; > #gpio-cells = <2>; > - snps,nr-gpios = <32>; > + ngpios = <32>; > reg = <0>; > interrupt-controller; > #interrupt-cells = <2>; > @@ -163,7 +163,7 @@ portc: gpio-controller@0 { > compatible = "snps,dw-apb-gpio-port"; > gpio-controller; > #gpio-cells = <2>; > - snps,nr-gpios = <8>; > + ngpios = <8>; > reg = <0>; > interrupt-controller; > #interrupt-cells = <2>; > -- > 2.29.2 >
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi index fa6e6905f588..53a9b76057aa 100644 --- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi +++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi @@ -127,7 +127,7 @@ porta: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -145,7 +145,7 @@ portb: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -163,7 +163,7 @@ portc: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>;
This is to remove similar errors as below: OF: /.../gpio-port@0: could not find phandle Commit 7569486d79ae ("gpio: dwapb: Add ngpios DT-property support") explained the reason of above errors well and added the generic "ngpios" property, let's use it. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> --- arch/arm64/boot/dts/bitmain/bm1880.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)