| Message ID | 20201111132133.1253-1-aladyshev22@gmail.com |
|---|---|
| State | Accepted |
| Commit | c74da5cf007c49873a502eb7f4554fefb23f3f33 |
| Headers | show |
| Series | ARM: dts: aspeed: amd-ethanolx: Add GPIO line names | expand |
On 11/11/20 7:21 AM, Konstantin Aladyshev wrote: > [CAUTION: External Email] > > Add GPIO line names for AMD EthanolX customer reference board. > It populates AST2500 GPIO lines (A0-A7 to AC0-AC7) with AMD EthanolX > designated names. > > Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Reviewed-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com> > --- > arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 44 +++++++++++++++++++ > 1 file changed, 44 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts > index b93ed44eba0c..96ff0aea64e5 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts > @@ -97,6 +97,50 @@ > &pinctrl_adc4_default>; > }; > > +&gpio { > + status = "okay"; > + gpio-line-names = > + /*A0-A7*/ "","","FAULT_LED","CHASSIS_ID_LED","","","","", > + /*B0-B7*/ "","","","","","","","", > + /*C0-C7*/ "CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","", > + /*D0-D7*/ "HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S", > + "JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD", > + /*E0-E7*/ "","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN", > + "MON_P0_PWR_GOOD","MON_PWROK","MON_RESET", > + /*F0-F7*/ "MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP", > + "MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","", > + /*G0-G7*/ "BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0", > + "P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","", > + /*H0-H7*/ "BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3", > + "PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1", > + /*I0-I7*/ "","","","","","","","", > + /*J0-J7*/ "","","","","","","","", > + /*K0-K7*/ "","","","","","","","", > + /*L0-L7*/ "","","","","","","","", > + /*M0-M7*/ "ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN", > + "ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT", > + "ASSERT_CLR_CMOS","ASSERT_BMC_READY", > + /*N0-N7*/ "","","","","","","","", > + /*O0-O7*/ "","","","","","","","", > + /*P0-P7*/ "P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT", > + "P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT", > + "P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT", > + "P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT", > + /*Q0-Q7*/ "","","","","","","","", > + /*R0-R7*/ "","","","","","","","", > + /*S0-S7*/ "","","","","","","","", > + /*T0-T7*/ "","","","","","","","", > + /*U0-U7*/ "","","","","","","","", > + /*V0-V7*/ "","","","","","","","", > + /*W0-W7*/ "","","","","","","","", > + /*X0-X7*/ "","","","","","","","", > + /*Y0-Y7*/ "","","","","","","","", > + /*Z0-Z7*/ "","","","","","","","", > + /*AA0-AA7*/ "","SENSOR THERM","","","","","","", > + /*AB0-AB7*/ "","","","","","","","", > + /*AC0-AC7*/ "","","","","","","",""; > +}; > + > //APML for P0 > &i2c0 { > status = "okay"; > -- > 2.17.1 >
On Wed, 11 Nov 2020 at 22:44, Supreeth Venkatesh <supreeth.venkatesh@amd.com> wrote: > > > > On 11/11/20 7:21 AM, Konstantin Aladyshev wrote: > > [CAUTION: External Email] > > > > Add GPIO line names for AMD EthanolX customer reference board. > > It populates AST2500 GPIO lines (A0-A7 to AC0-AC7) with AMD EthanolX > > designated names. > > > > Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> > Reviewed-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com> Applied to dt-for-v5.11. Thanks, Joel > > --- > > arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 44 +++++++++++++++++++ > > 1 file changed, 44 insertions(+) > > > > diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts > > index b93ed44eba0c..96ff0aea64e5 100644 > > --- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts > > +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts > > @@ -97,6 +97,50 @@ > > &pinctrl_adc4_default>; > > }; > > > > +&gpio { > > + status = "okay"; > > + gpio-line-names = > > + /*A0-A7*/ "","","FAULT_LED","CHASSIS_ID_LED","","","","", > > + /*B0-B7*/ "","","","","","","","", > > + /*C0-C7*/ "CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","", > > + /*D0-D7*/ "HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S", > > + "JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD", > > + /*E0-E7*/ "","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN", > > + "MON_P0_PWR_GOOD","MON_PWROK","MON_RESET", > > + /*F0-F7*/ "MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP", > > + "MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","", > > + /*G0-G7*/ "BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0", > > + "P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","", > > + /*H0-H7*/ "BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3", > > + "PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1", > > + /*I0-I7*/ "","","","","","","","", > > + /*J0-J7*/ "","","","","","","","", > > + /*K0-K7*/ "","","","","","","","", > > + /*L0-L7*/ "","","","","","","","", > > + /*M0-M7*/ "ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN", > > + "ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT", > > + "ASSERT_CLR_CMOS","ASSERT_BMC_READY", > > + /*N0-N7*/ "","","","","","","","", > > + /*O0-O7*/ "","","","","","","","", > > + /*P0-P7*/ "P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT", > > + "P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT", > > + "P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT", > > + "P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT", > > + /*Q0-Q7*/ "","","","","","","","", > > + /*R0-R7*/ "","","","","","","","", > > + /*S0-S7*/ "","","","","","","","", > > + /*T0-T7*/ "","","","","","","","", > > + /*U0-U7*/ "","","","","","","","", > > + /*V0-V7*/ "","","","","","","","", > > + /*W0-W7*/ "","","","","","","","", > > + /*X0-X7*/ "","","","","","","","", > > + /*Y0-Y7*/ "","","","","","","","", > > + /*Z0-Z7*/ "","","","","","","","", > > + /*AA0-AA7*/ "","SENSOR THERM","","","","","","", > > + /*AB0-AB7*/ "","","","","","","","", > > + /*AC0-AC7*/ "","","","","","","",""; > > +}; > > + > > //APML for P0 > > &i2c0 { > > status = "okay"; > > -- > > 2.17.1 > >
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts index b93ed44eba0c..96ff0aea64e5 100644 --- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts @@ -97,6 +97,50 @@ &pinctrl_adc4_default>; }; +&gpio { + status = "okay"; + gpio-line-names = + /*A0-A7*/ "","","FAULT_LED","CHASSIS_ID_LED","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","", + /*D0-D7*/ "HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S", + "JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD", + /*E0-E7*/ "","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN", + "MON_P0_PWR_GOOD","MON_PWROK","MON_RESET", + /*F0-F7*/ "MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP", + "MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","", + /*G0-G7*/ "BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0", + "P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","", + /*H0-H7*/ "BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3", + "PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN", + "ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT", + "ASSERT_CLR_CMOS","ASSERT_BMC_READY", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT", + "P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT", + "P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT", + "P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","", + /*AA0-AA7*/ "","SENSOR THERM","","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + //APML for P0 &i2c0 { status = "okay";
Add GPIO line names for AMD EthanolX customer reference board. It populates AST2500 GPIO lines (A0-A7 to AC0-AC7) with AMD EthanolX designated names. Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> --- arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 44 +++++++++++++++++++ 1 file changed, 44 insertions(+)