diff mbox series

[v8,4/9] of/iommu: Support dma-can-stall property

Message ID 20201112125519.3987595-5-jean-philippe@linaro.org
State New
Headers show
Series iommu: I/O page faults for SMMUv3 | expand

Commit Message

Jean-Philippe Brucker Nov. 12, 2020, 12:55 p.m. UTC
Copy the dma-can-stall property into the fwspec structure.

Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>

---
 include/linux/iommu.h    | 2 ++
 drivers/iommu/of_iommu.c | 5 ++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

-- 
2.29.1

Comments

Jean-Philippe Brucker Dec. 14, 2020, 12:51 p.m. UTC | #1
On Thu, Nov 26, 2020 at 06:09:26PM +0000, Robin Murphy wrote:
> On 2020-11-12 12:55, Jean-Philippe Brucker wrote:

> > Copy the dma-can-stall property into the fwspec structure.

> 

> Can't we just handle this as a regular device property? It's not part of the

> actual IOMMU specifier, it doesn't need to be translated in any way, and

> AFAICS it's used a grand total of once, in a slow path. Simply treating it

> as the per-device property that it is should require zero additional code

> for DT, and a simple device_add_properties() call for IORT.

> 

> TBH that appears to be true of pasid-num-bits as well.


Right I think that's better, thanks for the pointer. I'll take care of
pasid-num-bits too. The Huawei quirk (fake PCIe supporting stall) is a
little worse this way, but it should work.

Thanks,
Jean

---
Diff untested on ACPI:

diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index e7b40e569488..ad5c55bc45b2 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -591,8 +591,6 @@ struct iommu_group *fsl_mc_device_group(struct device *dev);
 struct iommu_fwspec {
 	const struct iommu_ops	*ops;
 	struct fwnode_handle	*iommu_fwnode;
-	u32			num_pasid_bits;
-	bool			can_stall;
 	unsigned int		num_ids;
 	u32			ids[];
 };
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index aa76e775bd6d..1582f6585741 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -960,16 +960,19 @@ static int iort_pci_iommu_init(struct pci_dev *pdev, u16 alias, void *data)
 static void iort_named_component_init(struct device *dev,
 				      struct acpi_iort_node *node)
 {
+	struct property_entry props[3] = {};
 	struct acpi_iort_named_component *nc;
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-
-	if (!fwspec)
-		return;

 	nc = (struct acpi_iort_named_component *)node->node_data;
-	fwspec->num_pasid_bits = FIELD_GET(ACPI_IORT_NC_PASID_BITS,
-					   nc->node_flags);
-	fwspec->can_stall = (nc->node_flags & ACPI_IORT_NC_STALL_SUPPORTED);
+
+	props[0] = PROPERTY_ENTRY_U32("pasid-num-bits",
+				      FIELD_GET(ACPI_IORT_NC_PASID_BITS,
+						nc->node_flags));
+	if (nc->node_flags & ACPI_IORT_NC_STALL_SUPPORTED)
+		props[1] = PROPERTY_ENTRY_BOOL("dma-can-stall");
+
+	if (device_add_properties(dev, props))
+		dev_warn(dev, "Could not register device properties\n");
 }

 static int iort_nc_iommu_map(struct device *dev, struct acpi_iort_node *node)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 521ec7f0b2a0..571bd7c35a62 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -2842,7 +2842,8 @@ static struct iommu_device *arm_smmu_probe_device(struct device *dev)
 	if (ret)
 		goto err_free_master;

-	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
+	device_property_read_u32(dev, "pasid-num-bits", &master->ssid_bits);
+	master->ssid_bits = min(smmu->ssid_bits, master->ssid_bits);

 	/*
 	 * Note that PASID must be enabled before, and disabled after ATS:
@@ -2858,7 +2859,8 @@ static struct iommu_device *arm_smmu_probe_device(struct device *dev)
 		master->ssid_bits = min_t(u8, master->ssid_bits,
 					  CTXDESC_LINEAR_CDMAX);

-	if ((smmu->features & ARM_SMMU_FEAT_STALLS && fwspec->can_stall) ||
+	if ((smmu->features & ARM_SMMU_FEAT_STALLS &&
+	     device_property_read_bool(dev, "dma-can-stall")) ||
 	    smmu->features & ARM_SMMU_FEAT_STALL_FORCE)
 		master->stall_enabled = true;

diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
index d6255ca823d8..a9d2df001149 100644
--- a/drivers/iommu/of_iommu.c
+++ b/drivers/iommu/of_iommu.c
@@ -210,14 +210,6 @@ const struct iommu_ops *of_iommu_configure(struct device *dev,
 					     of_pci_iommu_init, &info);
 	} else {
 		err = of_iommu_configure_device(master_np, dev, id);
-
-		fwspec = dev_iommu_fwspec_get(dev);
-		if (!err && fwspec) {
-			of_property_read_u32(master_np, "pasid-num-bits",
-					     &fwspec->num_pasid_bits);
-			fwspec->can_stall = of_property_read_bool(master_np,
-								  "dma-can-stall");
-		}
 	}

 	/*
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 324dbe55836c..13a43a3d6347 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1828,12 +1828,17 @@ DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_HUAWEI, 0x1610, PCI_CLASS_BRIDGE_PCI

 static void quirk_huawei_pcie_sva(struct pci_dev *pdev)
 {
-	struct iommu_fwspec *fwspec;
+	struct property_entry properties[] = {
+		PROPERTY_ENTRY_BOOL("dma-can-stall"),
+		{},
+	};

 	pdev->eetlp_prefix_path = 1;
-	fwspec = dev_iommu_fwspec_get(&pdev->dev);
-	if (fwspec)
-		fwspec->can_stall = 1;
+
+	/* Device-tree can set the stall property */
+	if (!pdev->dev.of_node &&
+	    device_add_properties(&pdev->dev, properties))
+		pci_warn(pdev, "could not add stall property");
 }

 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa250, quirk_huawei_pcie_sva);
Zhangfei Gao Dec. 18, 2020, 6:47 a.m. UTC | #2
On 2020/12/14 下午8:51, Jean-Philippe Brucker wrote:
> On Thu, Nov 26, 2020 at 06:09:26PM +0000, Robin Murphy wrote:
>> On 2020-11-12 12:55, Jean-Philippe Brucker wrote:
>>> Copy the dma-can-stall property into the fwspec structure.
>> Can't we just handle this as a regular device property? It's not part of the
>> actual IOMMU specifier, it doesn't need to be translated in any way, and
>> AFAICS it's used a grand total of once, in a slow path. Simply treating it
>> as the per-device property that it is should require zero additional code
>> for DT, and a simple device_add_properties() call for IORT.
>>
>> TBH that appears to be true of pasid-num-bits as well.
> Right I think that's better, thanks for the pointer. I'll take care of
> pasid-num-bits too. The Huawei quirk (fake PCIe supporting stall) is a
> little worse this way, but it should work.

Thanks Jean, I tested the following diff, it works with Huawei quirk.

Thanks
diff mbox series

Patch

diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index a1c78c4cdeb1..9076fb592c8f 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -572,6 +572,7 @@  struct iommu_group *fsl_mc_device_group(struct device *dev);
  * @iommu_fwnode: firmware handle for this device's IOMMU
  * @iommu_priv: IOMMU driver private data for this device
  * @num_pasid_bits: number of PASID bits supported by this device
+ * @can_stall: the device is allowed to stall
  * @num_ids: number of associated device IDs
  * @ids: IDs which this device may present to the IOMMU
  */
@@ -579,6 +580,7 @@  struct iommu_fwspec {
 	const struct iommu_ops	*ops;
 	struct fwnode_handle	*iommu_fwnode;
 	u32			num_pasid_bits;
+	bool			can_stall;
 	unsigned int		num_ids;
 	u32			ids[];
 };
diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
index e505b9130a1c..d6255ca823d8 100644
--- a/drivers/iommu/of_iommu.c
+++ b/drivers/iommu/of_iommu.c
@@ -212,9 +212,12 @@  const struct iommu_ops *of_iommu_configure(struct device *dev,
 		err = of_iommu_configure_device(master_np, dev, id);
 
 		fwspec = dev_iommu_fwspec_get(dev);
-		if (!err && fwspec)
+		if (!err && fwspec) {
 			of_property_read_u32(master_np, "pasid-num-bits",
 					     &fwspec->num_pasid_bits);
+			fwspec->can_stall = of_property_read_bool(master_np,
+								  "dma-can-stall");
+		}
 	}
 
 	/*