diff mbox series

[v2,2/4] Documentation/powercap/dtpm: Add documentation for dtpm

Message ID 20201116152649.11482-3-daniel.lezcano@linaro.org
State New
Headers show
Series powercap/dtpm: Add the DTPM framework | expand

Commit Message

Daniel Lezcano Nov. 16, 2020, 3:26 p.m. UTC
The dynamic thermal and power management is a technique to dynamically
adjust the power consumption of different devices in order to ensure a
global thermal constraint.

An userspace daemon is usually monitoring the temperature and the
power to take immediate action on the device.

The DTPM framework provides an unified API to userspace to act on the
power.

Document this framework.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

---
 Documentation/power/powercap/dtpm.rst | 222 ++++++++++++++++++++++++++
 1 file changed, 222 insertions(+)
 create mode 100644 Documentation/power/powercap/dtpm.rst

-- 
2.17.1

Comments

Jonathan Corbet Nov. 17, 2020, 4:08 p.m. UTC | #1
On Mon, 16 Nov 2020 16:26:47 +0100
Daniel Lezcano <daniel.lezcano@linaro.org> wrote:

> The dynamic thermal and power management is a technique to dynamically

> adjust the power consumption of different devices in order to ensure a

> global thermal constraint.

> 

> An userspace daemon is usually monitoring the temperature and the

> power to take immediate action on the device.

> 

> The DTPM framework provides an unified API to userspace to act on the

> power.

> 

> Document this framework.


It's always refreshing to see documentation show up with a new feature! :)

That said, it's clear that you haven't built the docs with this new
material.  There's a couple of little things I would ask you to do...

> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

> ---

>  Documentation/power/powercap/dtpm.rst | 222 ++++++++++++++++++++++++++

>  1 file changed, 222 insertions(+)

>  create mode 100644 Documentation/power/powercap/dtpm.rst


You also need to add this new file to index.rst

> diff --git a/Documentation/power/powercap/dtpm.rst b/Documentation/power/powercap/dtpm.rst

> new file mode 100644

> index 000000000000..ce11cf183994

> --- /dev/null

> +++ b/Documentation/power/powercap/dtpm.rst

> @@ -0,0 +1,222 @@

> +==========================================

> +Dynamic Thermal Power Management framework

> +==========================================

> +

> +On the embedded world, the complexity of the SoC leads to an

> +increasing number of hotspots which need to be monitored and mitigated

> +as a whole in order to prevent the temperature to go above the

> +normative and legally stated 'skin temperature'.

> +

> +Another aspect is to sustain the performance for a given power budget,

> +for example virtual reality where the user can feel dizziness if the

> +performance is capped while a big CPU is processing something else. Or

> +reduce the battery charging because the dissipated power is too high

> +compared with the power consumed by other devices.

> +

> +The userspace is the most adequate place to dynamically act on the

> +different devices by limiting their power given an application

> +profile: it has the knowledge of the platform.

> +

> +The Dynamic Thermal Power Management (DTPM) is a technique acting on

> +the device power by limiting and/or balancing a power budget among

> +different devices.

> +

> +The DTPM framework provides an unified interface to act on the

> +device power.

> +

> +===========

> +1. Overview

> +===========


Please follow the sequence of subheading markers described in
Documentation/doc-guide/sphinx.rst.  This one should be:

	Overview
	========

(I took out the section number because that's not really needed in the RST
world, but that's up to you).

> +The DTPM framework relies on the powercap framework to create the

> +powercap entries in the sysfs directory and implement the backend

> +driver to do the connection with the power manageable device.

> +

> +The DTPM is a tree representation describing the power constraints

> +shared between devices, not their physical positions.

> +

> +The nodes of the tree are a virtual description aggregating the power

> +characteristics of the children nodes and their power limitations.

> +

> +The leaves of the tree are the real power manageable devices.

> +

> +For instance:

> +

> +  SoC

> +   |

> +   `-- pkg

> +	|

> +	|-- pd0 (cpu0-3)

> +	|

> +	`-- pd1 (cpu4-5)


This formatting will throw errors when you try to do the docs build.  The
easiest solution is to put literal blocks like this into ... a literal
block.  And that is most easily done by putting a double colon at the end
of the leading line:

   For instance::
   
The same will need to happen for all the rest of the ascii art.

> +* The pkg power will be the sum of pd0 and pd1 power numbers.

> +

> +  SoC (400mW - 3100mW)

> +   |

> +   `-- pkg (400mW - 3100mW)

> +	|

> +	|-- pd0 (100mW - 700mW)

> +	|

> +	`-- pd1 (300mW - 2400mW)

> +

> +* When the nodes are inserted in the tree, their power characteristics

> +  are propagated to the parents.


I suspect you'll also need to indent the literal block another space or two
to separate it from the bulleted list.

You don't have any kernel-doc directives to bring in the kerneldoc comments
from the code.  The code itself *does* have those comments, so you might
want to add those.

Thanks,

jon
Daniel Lezcano Nov. 17, 2020, 5:47 p.m. UTC | #2
On 17/11/2020 17:08, Jonathan Corbet wrote:
> On Mon, 16 Nov 2020 16:26:47 +0100

> Daniel Lezcano <daniel.lezcano@linaro.org> wrote:

> 

>> The dynamic thermal and power management is a technique to dynamically

>> adjust the power consumption of different devices in order to ensure a

>> global thermal constraint.

>>

>> An userspace daemon is usually monitoring the temperature and the

>> power to take immediate action on the device.

>>

>> The DTPM framework provides an unified API to userspace to act on the

>> power.

>>

>> Document this framework.

> 

> It's always refreshing to see documentation show up with a new feature! :)

> 

> That said, it's clear that you haven't built the docs with this new

> material.  There's a couple of little things I would ask you to do...


Thanks for the review, I'll take care of your comments and generate the
documentation to check the expected result.


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
diff mbox series

Patch

diff --git a/Documentation/power/powercap/dtpm.rst b/Documentation/power/powercap/dtpm.rst
new file mode 100644
index 000000000000..ce11cf183994
--- /dev/null
+++ b/Documentation/power/powercap/dtpm.rst
@@ -0,0 +1,222 @@ 
+==========================================
+Dynamic Thermal Power Management framework
+==========================================
+
+On the embedded world, the complexity of the SoC leads to an
+increasing number of hotspots which need to be monitored and mitigated
+as a whole in order to prevent the temperature to go above the
+normative and legally stated 'skin temperature'.
+
+Another aspect is to sustain the performance for a given power budget,
+for example virtual reality where the user can feel dizziness if the
+performance is capped while a big CPU is processing something else. Or
+reduce the battery charging because the dissipated power is too high
+compared with the power consumed by other devices.
+
+The userspace is the most adequate place to dynamically act on the
+different devices by limiting their power given an application
+profile: it has the knowledge of the platform.
+
+The Dynamic Thermal Power Management (DTPM) is a technique acting on
+the device power by limiting and/or balancing a power budget among
+different devices.
+
+The DTPM framework provides an unified interface to act on the
+device power.
+
+===========
+1. Overview
+===========
+
+The DTPM framework relies on the powercap framework to create the
+powercap entries in the sysfs directory and implement the backend
+driver to do the connection with the power manageable device.
+
+The DTPM is a tree representation describing the power constraints
+shared between devices, not their physical positions.
+
+The nodes of the tree are a virtual description aggregating the power
+characteristics of the children nodes and their power limitations.
+
+The leaves of the tree are the real power manageable devices.
+
+For instance:
+
+  SoC
+   |
+   `-- pkg
+	|
+	|-- pd0 (cpu0-3)
+	|
+	`-- pd1 (cpu4-5)
+
+* The pkg power will be the sum of pd0 and pd1 power numbers.
+
+  SoC (400mW - 3100mW)
+   |
+   `-- pkg (400mW - 3100mW)
+	|
+	|-- pd0 (100mW - 700mW)
+	|
+	`-- pd1 (300mW - 2400mW)
+
+* When the nodes are inserted in the tree, their power characteristics
+  are propagated to the parents.
+
+  SoC (600mW - 5900mW)
+   |
+   |-- pkg (400mW - 3100mW)
+   |    |
+   |    |-- pd0 (100mW - 700mW)
+   |    |
+   |    `-- pd1 (300mW - 2400mW)
+   |
+   `-- pd2 (200mW - 2800mW)
+
+* Each node have a weight on a 2^10 basis reflecting the percentage of
+  power consumption along the siblings.
+
+  SoC (w=1024)
+   |
+   |-- pkg (w=538)
+   |    |
+   |    |-- pd0 (w=231)
+   |    |
+   |    `-- pd1 (w=794)
+   |
+   `-- pd2 (w=486)
+
+   Note the sum of weights at the same level are equal to 1024.
+
+* When a power limitation is applied to a node, then it is distributed
+  along the children given their weights. For example, if we set a
+  power limitation of 3200mW at the 'SoC' root node, the resulting
+  tree will be.
+
+  SoC (w=1024) <--- power_limit = 3200mW
+   |
+   |-- pkg (w=538) --> power_limit = 1681mW
+   |    |
+   |    |-- pd0 (w=231) --> power_limit = 378mW
+   |    |
+   |    `-- pd1 (w=794) --> power_limit = 1303mW
+   |
+   `-- pd2 (w=486) --> power_limit = 1519mW
+
+====================
+1.1 Flat description
+====================
+
+A root node is created and it is the parent of all the nodes. This
+description is the simplest one and it is supposed to give to
+userspace a flat representation of all the devices supporting the
+power limitation without any power limitation distribution.
+
+============================
+1.2 Hierarchical description
+============================
+
+The different devices supporting the power limitation are represented
+hierarchically. There is one root node, all intermediate nodes are
+grouping the child nodes which can be intermediate nodes also or real
+devices.
+
+The intermediate nodes aggregate the power information and allows to
+set the power limit given the weight of the nodes.
+
+================
+2. Userspace API
+================
+
+As stated in the overview, the DTPM framework is built on top of the
+powercap framework. Thus the sysfs interface is the same, please refer
+to the powercap documentation for further details.
+
+ * power_uw: Instantaneous power consumption. If the node is an
+   intermediate node, then the power consumption will be the sum of all
+   children power consumption.
+
+ * max_power_range_uw: The power range resulting of the maximum power
+   minus the minimum power.
+
+ * name: The name of the node. This is implementation dependant. Even
+   if it is not recommended for the userspace, several nodes can have
+   the same name.
+
+ * constraint_X_name: The name of the constraint.
+
+ * constraint_X_max_power_uw: The maximum power limit to be applicable
+   to the node.
+
+ * constraint_X_power_limit_uw: The power limit to be applied to the
+   node. If the value contained in constraint_X_max_power_uw is set,
+   the constraint will be removed.
+
+ * constraint_X_time_window_us: The meaning of this file will depend
+   on the constraint number.
+
+===============
+2.1 Constraints
+===============
+
+ * Constraint 0: The power limitation is immediately applied, without
+   limitation in time.
+
+=============
+3. Kernel API
+=============
+
+============
+3.1 Overview
+============
+
+The DTPM framework has no power limiting backend support. It is
+generic and provides a set of API to let the different drivers to
+implement the backend part for the power limitation and create a the
+power constraints tree.
+
+It is up to the platform to provide the initialization function to
+allocate and link the different nodes of the tree.
+
+A special macro has the role of declaring a node and the corresponding
+initialization function via a description structure. This one contains
+an optional parent field allowing to hook different devices to an
+already existing tree at boot time.
+
+struct dtpm_descr my_descr = {
+	.name = "my_name",
+	.init = my_init_func,
+};
+
+DTPM_DECLARE(my_descr);
+
+The nodes of the DTPM tree are described with dtpm structure. The
+steps to add a new power limitable device is done in three steps:
+
+ * Allocate the dtpm node
+ * Set the power number of the dtpm node
+ * Register the dtpm node
+
+The registration of the dtpm node is done with the powercap
+ops. Basically, it must implements the callbacks to get and set the
+power and the limit.
+
+Alternatively, if the node to be inserted is an intermediate one, then
+a simple function to insert it as a future parent is available.
+
+If a device has its power characteristics changing, then the tree must
+be updated with the new power numbers and weights.
+
+================
+3.2 Nomenclature
+================
+
+ * dtpm_alloc() : Allocate and initialize a dtpm structure
+
+ * dtpm_register() : Add the dtpm node to the tree
+
+ * dtpm_register_parent() : Add an intermediate node
+
+ * dtpm_unregister() : Remove the dtpm node from the tree
+
+ * dtpm_update_power() : Update the power characteristics of the dtpm node