diff mbox

[v3,1/4] usb/gadget: fastboot: add sparse image definitions

Message ID 1403813604-31685-2-git-send-email-srae@broadcom.com
State New
Headers show

Commit Message

Steve Rae June 26, 2014, 8:13 p.m. UTC
- to prepare for the support of fastboot sparse images

Signed-off-by: Steve Rae <srae@broadcom.com>
---
This file is ASIS from:
  https://raw.githubusercontent.com/AOSB/android_system_core/master/libsparse/sparse_format.h
  (commit 28fa5bc347390480fe190294c6c385b6a9f0d68b)
except for the __UBOOT__ conditional include.

Changes in v3: None
Changes in v2: None

 include/sparse_format.h | 58 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 include/sparse_format.h

Comments

Marek Vasut July 31, 2014, 1:25 a.m. UTC | #1
On Thursday, June 26, 2014 at 10:13:21 PM, Steve Rae wrote:
> - to prepare for the support of fastboot sparse images
> 
> Signed-off-by: Steve Rae <srae@broadcom.com>
> ---
> This file is ASIS from:
>  
> https://raw.githubusercontent.com/AOSB/android_system_core/master/libspars
> e/sparse_format.h (commit 28fa5bc347390480fe190294c6c385b6a9f0d68b)
> except for the __UBOOT__ conditional include.
> 
> Changes in v3: None
> Changes in v2: None
> 
>  include/sparse_format.h | 58
> +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58
> insertions(+)
>  create mode 100644 include/sparse_format.h
> 
> diff --git a/include/sparse_format.h b/include/sparse_format.h
> new file mode 100644
> index 0000000..21fbd05
> --- /dev/null
> +++ b/include/sparse_format.h
> @@ -0,0 +1,58 @@
> +/*
> + * Copyright (C) 2010 The Android Open Source Project
> + *
> + * Licensed under the Apache License, Version 2.0 (the "License");
> + * you may not use this file except in compliance with the License.
> + * You may obtain a copy of the License at
> + *
> + *      http://www.apache.org/licenses/LICENSE-2.0
> + *
> + * Unless required by applicable law or agreed to in writing, software
> + * distributed under the License is distributed on an "AS IS" BASIS,
> + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
> implied. + * See the License for the specific language governing
> permissions and + * limitations under the License.

Please use the SPDX licence identifiers (pelase see Licenses/README)?

> + */
> +
> +#ifndef _LIBSPARSE_SPARSE_FORMAT_H_
> +#define _LIBSPARSE_SPARSE_FORMAT_H_
> +#define __UBOOT__
> +#ifndef __UBOOT__
> +#include "sparse_defs.h"
> +#endif
> +
> +typedef struct sparse_header {
> +  __le32	magic;		/* 0xed26ff3a */
> +  __le16	major_version;	/* (0x1) - reject images with higher major
> versions */ +  __le16	minor_version;	/* (0x0) - allow images with higer
> minor versions */ +  __le16	file_hdr_sz;	/* 28 bytes for first revision of
> the file format */ +  __le16	chunk_hdr_sz;	/* 12 bytes for first revision
> of the file format */ +  __le32	blk_sz;		/* block size in bytes, 
must be a
> multiple of 4 (4096) */ +  __le32	total_blks;	/* total blocks in the
> non-sparse output image */ +  __le32	total_chunks;	/* total chunks in the
> sparse input image */ +  __le32	image_checksum; /* CRC32 checksum of the
> original data, counting "don't care" */ +				/* as 0. 
Standard 802.3
> polynomial, use a Public Domain */
> +				/* table implementation */
> +} sparse_header_t;
> +
> +#define SPARSE_HEADER_MAGIC	0xed26ff3a
> +
> +#define CHUNK_TYPE_RAW		0xCAC1
> +#define CHUNK_TYPE_FILL		0xCAC2
> +#define CHUNK_TYPE_DONT_CARE	0xCAC3
> +#define CHUNK_TYPE_CRC32    0xCAC4
> +
> +typedef struct chunk_header {
> +  __le16	chunk_type;	/* 0xCAC1 -> raw; 0xCAC2 -> fill; 0xCAC3 -> 
don't
> care */ +  __le16	reserved1;
> +  __le32	chunk_sz;	/* in blocks in output image */
> +  __le32	total_sz;	/* in bytes of chunk input file including chunk 
header
> and data */ +} chunk_header_t;
> +
> +/* Following a Raw or Fill or CRC32 chunk is data.

The comment here is not aligned with coding style, I'll leave fixing it up to 
you, since the license header text needs revisiting.

> + *  For a Raw chunk, it's the data in chunk_sz * blk_sz.
> + *  For a Fill chunk, it's 4 bytes of the fill data.
> + *  For a CRC32 chunk, it's 4 bytes of CRC32
> + */
> +
> +#endif
Steve Rae July 31, 2014, 5:32 p.m. UTC | #2
On 14-07-30 06:25 PM, Marek Vasut wrote:
> On Thursday, June 26, 2014 at 10:13:21 PM, Steve Rae wrote:
>> - to prepare for the support of fastboot sparse images
>>
>> Signed-off-by: Steve Rae <srae@broadcom.com>
>> ---
>> This file is ASIS from:
>>
>> https://raw.githubusercontent.com/AOSB/android_system_core/master/libspars
>> e/sparse_format.h (commit 28fa5bc347390480fe190294c6c385b6a9f0d68b)
>> except for the __UBOOT__ conditional include.
>>
>> Changes in v3: None
>> Changes in v2: None
>>
>>   include/sparse_format.h | 58
>> +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58
>> insertions(+)
>>   create mode 100644 include/sparse_format.h
>>
>> diff --git a/include/sparse_format.h b/include/sparse_format.h
>> new file mode 100644
>> index 0000000..21fbd05
>> --- /dev/null
>> +++ b/include/sparse_format.h
>> @@ -0,0 +1,58 @@
>> +/*
>> + * Copyright (C) 2010 The Android Open Source Project
>> + *
>> + * Licensed under the Apache License, Version 2.0 (the "License");
>> + * you may not use this file except in compliance with the License.
>> + * You may obtain a copy of the License at
>> + *
>> + *      http://www.apache.org/licenses/LICENSE-2.0
>> + *
>> + * Unless required by applicable law or agreed to in writing, software
>> + * distributed under the License is distributed on an "AS IS" BASIS,
>> + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
>> implied. + * See the License for the specific language governing
>> permissions and + * limitations under the License.
>
> Please use the SPDX licence identifiers (pelase see Licenses/README)?
>
>> + */
>> +
>> +#ifndef _LIBSPARSE_SPARSE_FORMAT_H_
>> +#define _LIBSPARSE_SPARSE_FORMAT_H_
>> +#define __UBOOT__
>> +#ifndef __UBOOT__
>> +#include "sparse_defs.h"
>> +#endif
>> +
>> +typedef struct sparse_header {
>> +  __le32	magic;		/* 0xed26ff3a */
>> +  __le16	major_version;	/* (0x1) - reject images with higher major
>> versions */ +  __le16	minor_version;	/* (0x0) - allow images with higer
>> minor versions */ +  __le16	file_hdr_sz;	/* 28 bytes for first revision of
>> the file format */ +  __le16	chunk_hdr_sz;	/* 12 bytes for first revision
>> of the file format */ +  __le32	blk_sz;		/* block size in bytes,
> must be a
>> multiple of 4 (4096) */ +  __le32	total_blks;	/* total blocks in the
>> non-sparse output image */ +  __le32	total_chunks;	/* total chunks in the
>> sparse input image */ +  __le32	image_checksum; /* CRC32 checksum of the
>> original data, counting "don't care" */ +				/* as 0.
> Standard 802.3
>> polynomial, use a Public Domain */
>> +				/* table implementation */
>> +} sparse_header_t;
>> +
>> +#define SPARSE_HEADER_MAGIC	0xed26ff3a
>> +
>> +#define CHUNK_TYPE_RAW		0xCAC1
>> +#define CHUNK_TYPE_FILL		0xCAC2
>> +#define CHUNK_TYPE_DONT_CARE	0xCAC3
>> +#define CHUNK_TYPE_CRC32    0xCAC4
>> +
>> +typedef struct chunk_header {
>> +  __le16	chunk_type;	/* 0xCAC1 -> raw; 0xCAC2 -> fill; 0xCAC3 ->
> don't
>> care */ +  __le16	reserved1;
>> +  __le32	chunk_sz;	/* in blocks in output image */
>> +  __le32	total_sz;	/* in bytes of chunk input file including chunk
> header
>> and data */ +} chunk_header_t;
>> +
>> +/* Following a Raw or Fill or CRC32 chunk is data.
>
> The comment here is not aligned with coding style, I'll leave fixing it up to
> you, since the license header text needs revisiting.
>
>> + *  For a Raw chunk, it's the data in chunk_sz * blk_sz.
>> + *  For a Fill chunk, it's 4 bytes of the fill data.
>> + *  For a CRC32 chunk, it's 4 bytes of CRC32
>> + */
>> +
>> +#endif

To clarify:
I am taking this file ASIS from the location stated in the commit 
message....
Do we _really_ want to modify _anything_ in this file (especially when 
the content is not changing); or do we want to leaving it pristine?
Marek Vasut Aug. 1, 2014, 12:13 p.m. UTC | #3
On Thursday, July 31, 2014 at 07:32:51 PM, Steve Rae wrote:
> On 14-07-30 06:25 PM, Marek Vasut wrote:
> > On Thursday, June 26, 2014 at 10:13:21 PM, Steve Rae wrote:
> >> - to prepare for the support of fastboot sparse images
> >> 
> >> Signed-off-by: Steve Rae <srae@broadcom.com>
> >> ---
> >> This file is ASIS from:
> >> 
> >> https://raw.githubusercontent.com/AOSB/android_system_core/master/libspa
> >> rs e/sparse_format.h (commit 28fa5bc347390480fe190294c6c385b6a9f0d68b)
> >> except for the __UBOOT__ conditional include.
> >> 
> >> Changes in v3: None
> >> Changes in v2: None
> >> 
> >>   include/sparse_format.h | 58
> >> 
> >> +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58
> >> insertions(+)
> >> 
> >>   create mode 100644 include/sparse_format.h
> >> 
> >> diff --git a/include/sparse_format.h b/include/sparse_format.h
> >> new file mode 100644
> >> index 0000000..21fbd05
> >> --- /dev/null
> >> +++ b/include/sparse_format.h
> >> @@ -0,0 +1,58 @@
> >> +/*
> >> + * Copyright (C) 2010 The Android Open Source Project
> >> + *
> >> + * Licensed under the Apache License, Version 2.0 (the "License");
> >> + * you may not use this file except in compliance with the License.
> >> + * You may obtain a copy of the License at
> >> + *
> >> + *      http://www.apache.org/licenses/LICENSE-2.0
> >> + *
> >> + * Unless required by applicable law or agreed to in writing, software
> >> + * distributed under the License is distributed on an "AS IS" BASIS,
> >> + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
> >> implied. + * See the License for the specific language governing
> >> permissions and + * limitations under the License.
> > 
> > Please use the SPDX licence identifiers (pelase see Licenses/README)?
> > 
> >> + */
> >> +
> >> +#ifndef _LIBSPARSE_SPARSE_FORMAT_H_
> >> +#define _LIBSPARSE_SPARSE_FORMAT_H_
> >> +#define __UBOOT__
> >> +#ifndef __UBOOT__
> >> +#include "sparse_defs.h"
> >> +#endif
> >> +
> >> +typedef struct sparse_header {
> >> +  __le32	magic;		/* 0xed26ff3a */
> >> +  __le16	major_version;	/* (0x1) - reject images with higher major
> >> versions */ +  __le16	minor_version;	/* (0x0) - allow images with 
higer
> >> minor versions */ +  __le16	file_hdr_sz;	/* 28 bytes for first 
revision
> >> of the file format */ +  __le16	chunk_hdr_sz;	/* 12 bytes for first
> >> revision of the file format */ +  __le32	blk_sz;		/* block size in
> >> bytes,
> > 
> > must be a
> > 
> >> multiple of 4 (4096) */ +  __le32	total_blks;	/* total blocks in the
> >> non-sparse output image */ +  __le32	total_chunks;	/* total chunks 
in
> >> the sparse input image */ +  __le32	image_checksum; /* CRC32 checksum
> >> of the original data, counting "don't care" */ +				/* 
as 0.
> > 
> > Standard 802.3
> > 
> >> polynomial, use a Public Domain */
> >> +				/* table implementation */
> >> +} sparse_header_t;
> >> +
> >> +#define SPARSE_HEADER_MAGIC	0xed26ff3a
> >> +
> >> +#define CHUNK_TYPE_RAW		0xCAC1
> >> +#define CHUNK_TYPE_FILL		0xCAC2
> >> +#define CHUNK_TYPE_DONT_CARE	0xCAC3
> >> +#define CHUNK_TYPE_CRC32    0xCAC4
> >> +
> >> +typedef struct chunk_header {
> >> +  __le16	chunk_type;	/* 0xCAC1 -> raw; 0xCAC2 -> fill; 0xCAC3 ->
> > 
> > don't
> > 
> >> care */ +  __le16	reserved1;
> >> +  __le32	chunk_sz;	/* in blocks in output image */
> >> +  __le32	total_sz;	/* in bytes of chunk input file including chunk
> > 
> > header
> > 
> >> and data */ +} chunk_header_t;
> >> +
> >> +/* Following a Raw or Fill or CRC32 chunk is data.
> > 
> > The comment here is not aligned with coding style, I'll leave fixing it
> > up to you, since the license header text needs revisiting.
> > 
> >> + *  For a Raw chunk, it's the data in chunk_sz * blk_sz.
> >> + *  For a Fill chunk, it's 4 bytes of the fill data.
> >> + *  For a CRC32 chunk, it's 4 bytes of CRC32
> >> + */
> >> +
> >> +#endif
> 
> To clarify:
> I am taking this file ASIS from the location stated in the commit
> message....
> Do we _really_ want to modify _anything_ in this file (especially when
> the content is not changing); or do we want to leaving it pristine?

I'd prefer consistency with the rest of the codebase. Let's wait what others 
think.
Tom Rini Aug. 5, 2014, 2 p.m. UTC | #4
On Thu, Jul 31, 2014 at 10:32:51AM -0700, Steve Rae wrote:
> 
> 
> On 14-07-30 06:25 PM, Marek Vasut wrote:
> >On Thursday, June 26, 2014 at 10:13:21 PM, Steve Rae wrote:
> >>- to prepare for the support of fastboot sparse images
> >>
> >>Signed-off-by: Steve Rae <srae@broadcom.com>
> >>---
> >>This file is ASIS from:
> >>
> >>https://raw.githubusercontent.com/AOSB/android_system_core/master/libspars
> >>e/sparse_format.h (commit 28fa5bc347390480fe190294c6c385b6a9f0d68b)
> >>except for the __UBOOT__ conditional include.
> >>
> >>Changes in v3: None
> >>Changes in v2: None
> >>
> >>  include/sparse_format.h | 58
> >>+++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58
> >>insertions(+)
> >>  create mode 100644 include/sparse_format.h
> >>
> >>diff --git a/include/sparse_format.h b/include/sparse_format.h
> >>new file mode 100644
> >>index 0000000..21fbd05
> >>--- /dev/null
> >>+++ b/include/sparse_format.h
> >>@@ -0,0 +1,58 @@
> >>+/*
> >>+ * Copyright (C) 2010 The Android Open Source Project
> >>+ *
> >>+ * Licensed under the Apache License, Version 2.0 (the "License");
> >>+ * you may not use this file except in compliance with the License.
> >>+ * You may obtain a copy of the License at
> >>+ *
> >>+ *      http://www.apache.org/licenses/LICENSE-2.0
> >>+ *
> >>+ * Unless required by applicable law or agreed to in writing, software
> >>+ * distributed under the License is distributed on an "AS IS" BASIS,
> >>+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
> >>implied. + * See the License for the specific language governing
> >>permissions and + * limitations under the License.
> >
> >Please use the SPDX licence identifiers (pelase see Licenses/README)?

And again, the license itself _is_ a problem.

[snip]
> To clarify:
> I am taking this file ASIS from the location stated in the commit
> message....
> Do we _really_ want to modify _anything_ in this file (especially
> when the content is not changing); or do we want to leaving it
> pristine?

I'd be fine with it being pristine if it was a GPL-compatible license.
Steve Rae Aug. 5, 2014, 10:17 p.m. UTC | #5
On 14-08-05 07:00 AM, Tom Rini wrote:
> On Thu, Jul 31, 2014 at 10:32:51AM -0700, Steve Rae wrote:
>>
>>
>> On 14-07-30 06:25 PM, Marek Vasut wrote:
>>> On Thursday, June 26, 2014 at 10:13:21 PM, Steve Rae wrote:
>>>> - to prepare for the support of fastboot sparse images
>>>>
>>>> Signed-off-by: Steve Rae <srae@broadcom.com>
>>>> ---
>>>> This file is ASIS from:
>>>>
>>>> https://raw.githubusercontent.com/AOSB/android_system_core/master/libspars
>>>> e/sparse_format.h (commit 28fa5bc347390480fe190294c6c385b6a9f0d68b)
>>>> except for the __UBOOT__ conditional include.
>>>>
>>>> Changes in v3: None
>>>> Changes in v2: None
>>>>
>>>>   include/sparse_format.h | 58
>>>> +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 58
>>>> insertions(+)
>>>>   create mode 100644 include/sparse_format.h
>>>>
>>>> diff --git a/include/sparse_format.h b/include/sparse_format.h
>>>> new file mode 100644
>>>> index 0000000..21fbd05
>>>> --- /dev/null
>>>> +++ b/include/sparse_format.h
>>>> @@ -0,0 +1,58 @@
>>>> +/*
>>>> + * Copyright (C) 2010 The Android Open Source Project
>>>> + *
>>>> + * Licensed under the Apache License, Version 2.0 (the "License");
>>>> + * you may not use this file except in compliance with the License.
>>>> + * You may obtain a copy of the License at
>>>> + *
>>>> + *      http://www.apache.org/licenses/LICENSE-2.0
>>>> + *
>>>> + * Unless required by applicable law or agreed to in writing, software
>>>> + * distributed under the License is distributed on an "AS IS" BASIS,
>>>> + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
>>>> implied. + * See the License for the specific language governing
>>>> permissions and + * limitations under the License.
>>>
>>> Please use the SPDX licence identifiers (pelase see Licenses/README)?
>
> And again, the license itself _is_ a problem.
>
> [snip]
>> To clarify:
>> I am taking this file ASIS from the location stated in the commit
>> message....
>> Do we _really_ want to modify _anything_ in this file (especially
>> when the content is not changing); or do we want to leaving it
>> pristine?
>
> I'd be fine with it being pristine if it was a GPL-compatible license.
>

Any ideas on how can we proceed? How can we get past this license issue?
IMO, the "fastboot flash" command is severely hampered if we cannot 
support the "sparse" format.
Thanks in advance, Steve
diff mbox

Patch

diff --git a/include/sparse_format.h b/include/sparse_format.h
new file mode 100644
index 0000000..21fbd05
--- /dev/null
+++ b/include/sparse_format.h
@@ -0,0 +1,58 @@ 
+/*
+ * Copyright (C) 2010 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef _LIBSPARSE_SPARSE_FORMAT_H_
+#define _LIBSPARSE_SPARSE_FORMAT_H_
+#define __UBOOT__
+#ifndef __UBOOT__
+#include "sparse_defs.h"
+#endif
+
+typedef struct sparse_header {
+  __le32	magic;		/* 0xed26ff3a */
+  __le16	major_version;	/* (0x1) - reject images with higher major versions */
+  __le16	minor_version;	/* (0x0) - allow images with higer minor versions */
+  __le16	file_hdr_sz;	/* 28 bytes for first revision of the file format */
+  __le16	chunk_hdr_sz;	/* 12 bytes for first revision of the file format */
+  __le32	blk_sz;		/* block size in bytes, must be a multiple of 4 (4096) */
+  __le32	total_blks;	/* total blocks in the non-sparse output image */
+  __le32	total_chunks;	/* total chunks in the sparse input image */
+  __le32	image_checksum; /* CRC32 checksum of the original data, counting "don't care" */
+				/* as 0. Standard 802.3 polynomial, use a Public Domain */
+				/* table implementation */
+} sparse_header_t;
+
+#define SPARSE_HEADER_MAGIC	0xed26ff3a
+
+#define CHUNK_TYPE_RAW		0xCAC1
+#define CHUNK_TYPE_FILL		0xCAC2
+#define CHUNK_TYPE_DONT_CARE	0xCAC3
+#define CHUNK_TYPE_CRC32    0xCAC4
+
+typedef struct chunk_header {
+  __le16	chunk_type;	/* 0xCAC1 -> raw; 0xCAC2 -> fill; 0xCAC3 -> don't care */
+  __le16	reserved1;
+  __le32	chunk_sz;	/* in blocks in output image */
+  __le32	total_sz;	/* in bytes of chunk input file including chunk header and data */
+} chunk_header_t;
+
+/* Following a Raw or Fill or CRC32 chunk is data.
+ *  For a Raw chunk, it's the data in chunk_sz * blk_sz.
+ *  For a Fill chunk, it's 4 bytes of the fill data.
+ *  For a CRC32 chunk, it's 4 bytes of CRC32
+ */
+
+#endif