diff mbox series

drm/msm/dpu: Remove chatty vbif debug print

Message ID 20201117172608.2091648-1-swboyd@chromium.org
State New
Headers show
Series drm/msm/dpu: Remove chatty vbif debug print | expand

Commit Message

Stephen Boyd Nov. 17, 2020, 5:26 p.m. UTC
I don't know what this debug print is for but it is super chatty,
throwing 8 lines of debug prints in the logs every time we update a
plane. It looks like it has no value. Let's nuke it so we can get
better logs.

Cc: Sean Paul <sean@poorly.run>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c | 3 ---
 1 file changed, 3 deletions(-)

Comments

Abhinav Kumar Nov. 17, 2020, 8:34 p.m. UTC | #1
On 2020-11-17 09:26, Stephen Boyd wrote:
> I don't know what this debug print is for but it is super chatty,
> throwing 8 lines of debug prints in the logs every time we update a
> plane. It looks like it has no value. Let's nuke it so we can get
> better logs.
> 
> Cc: Sean Paul <sean@poorly.run>
> Cc: Abhinav Kumar <abhinavk@codeaurora.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>

> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c | 3 ---
>  1 file changed, 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
> index 5e8c3f3e6625..5eb2b2ee09f5 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
> @@ -245,9 +245,6 @@ void dpu_vbif_set_qos_remap(struct dpu_kms 
> *dpu_kms,
>  	forced_on = mdp->ops.setup_clk_force_ctrl(mdp, params->clk_ctrl, 
> true);
> 
>  	for (i = 0; i < qos_tbl->npriority_lvl; i++) {
> -		DPU_DEBUG("vbif:%d xin:%d lvl:%d/%d\n",
> -				params->vbif_idx, params->xin_id, i,
> -				qos_tbl->priority_lvl[i]);

Instead of getting rid of this print, we should optimize the caller of 
this. This is what
we are doing in downstream. So we need to update the property only if we 
are switching from a RT client
to non-RT client for the plane and vice-versa. So we should try to do 
the same thing here.

  	is_rt = sde_crtc_is_rt_client(crtc, crtc->state);
  	if (is_rt != psde->is_rt_pipe) {
  		psde->is_rt_pipe = is_rt;
  		pstate->dirty |= SDE_PLANE_DIRTY_QOS;
  	}


  	if (pstate->dirty & DPU_PLANE_DIRTY_QOS)
  		_dpu_plane_set_qos_remap(plane);
Stephen Boyd Nov. 17, 2020, 10:53 p.m. UTC | #2
Quoting abhinavk@codeaurora.org (2020-11-17 12:34:56)
> On 2020-11-17 09:26, Stephen Boyd wrote:
> > I don't know what this debug print is for but it is super chatty,
> > throwing 8 lines of debug prints in the logs every time we update a
> > plane. It looks like it has no value. Let's nuke it so we can get
> > better logs.
> > 
> > Cc: Sean Paul <sean@poorly.run>
> > Cc: Abhinav Kumar <abhinavk@codeaurora.org>
> > Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> 
> > ---
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c | 3 ---
> >  1 file changed, 3 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
> > b/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
> > index 5e8c3f3e6625..5eb2b2ee09f5 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
> > @@ -245,9 +245,6 @@ void dpu_vbif_set_qos_remap(struct dpu_kms 
> > *dpu_kms,
> >       forced_on = mdp->ops.setup_clk_force_ctrl(mdp, params->clk_ctrl, 
> > true);
> > 
> >       for (i = 0; i < qos_tbl->npriority_lvl; i++) {
> > -             DPU_DEBUG("vbif:%d xin:%d lvl:%d/%d\n",
> > -                             params->vbif_idx, params->xin_id, i,
> > -                             qos_tbl->priority_lvl[i]);
> 
> Instead of getting rid of this print, we should optimize the caller of 
> this.

Does the print tell us anything? Right now it prints 8 lines where it
feels like it could be trimmed down:

           [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:0/3
           [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:1/3
           [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:2/4
           [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:3/4
           [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:4/5
           [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:5/5
           [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:6/6
           [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:7/6

maybe one line that combines the index into values?

           [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 [3 3 4 4 5 5 6 6]

But again I have no idea if this print is really useful. Maybe we can
print it only if the value changes from what was already there?
Basically move the print into dpu_hw_set_qos_remap() and then skip out
early if nothing changed or print and modify the register.

> This is what
> we are doing in downstream. So we need to update the property only if we 
> are switching from a RT client
> to non-RT client for the plane and vice-versa. So we should try to do 
> the same thing here.
> 
>         is_rt = sde_crtc_is_rt_client(crtc, crtc->state);
>         if (is_rt != psde->is_rt_pipe) {
>                 psde->is_rt_pipe = is_rt;
>                 pstate->dirty |= SDE_PLANE_DIRTY_QOS;
>         }
> 
> 
>         if (pstate->dirty & DPU_PLANE_DIRTY_QOS)
>                 _dpu_plane_set_qos_remap(plane);
> 

Sounds great! Can you send the patch?
Abhinav Kumar Nov. 18, 2020, 8:03 p.m. UTC | #3
Hi Stephen

On 2020-11-18 07:49, Rob Clark wrote:
> On Tue, Nov 17, 2020 at 2:53 PM Stephen Boyd <swboyd@chromium.org> 
> wrote:
>> 
>> Quoting abhinavk@codeaurora.org (2020-11-17 12:34:56)
>> > On 2020-11-17 09:26, Stephen Boyd wrote:
>> > > I don't know what this debug print is for but it is super chatty,
>> > > throwing 8 lines of debug prints in the logs every time we update a
>> > > plane. It looks like it has no value. Let's nuke it so we can get
>> > > better logs.
>> > >
>> > > Cc: Sean Paul <sean@poorly.run>
>> > > Cc: Abhinav Kumar <abhinavk@codeaurora.org>
>> > > Signed-off-by: Stephen Boyd <swboyd@chromium.org>
>> >
>> > > ---
>> > >  drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c | 3 ---
>> > >  1 file changed, 3 deletions(-)
>> > >
>> > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
>> > > b/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
>> > > index 5e8c3f3e6625..5eb2b2ee09f5 100644
>> > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
>> > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
>> > > @@ -245,9 +245,6 @@ void dpu_vbif_set_qos_remap(struct dpu_kms
>> > > *dpu_kms,
>> > >       forced_on = mdp->ops.setup_clk_force_ctrl(mdp, params->clk_ctrl,
>> > > true);
>> > >
>> > >       for (i = 0; i < qos_tbl->npriority_lvl; i++) {
>> > > -             DPU_DEBUG("vbif:%d xin:%d lvl:%d/%d\n",
>> > > -                             params->vbif_idx, params->xin_id, i,
>> > > -                             qos_tbl->priority_lvl[i]);
>> >
>> > Instead of getting rid of this print, we should optimize the caller of
>> > this.
>> 
>> Does the print tell us anything? Right now it prints 8 lines where it
>> feels like it could be trimmed down:
>> 
>>            [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:0/3
>>            [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:1/3
>>            [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:2/4
>>            [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:3/4
>>            [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:4/5
>>            [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:5/5
>>            [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:6/6
>>            [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 lvl:7/6
>> 
>> maybe one line that combines the index into values?
>> 
>>            [drm:dpu_vbif_set_qos_remap] vbif:0 xin:0 [3 3 4 4 5 5 6 6]
>> 
> 
> or possibly convert to a tracepoint (so it doesn't spam the drm_trace 
> buffer)
> 
> BR,
> -R
> 
>> But again I have no idea if this print is really useful. Maybe we can
>> print it only if the value changes from what was already there?
>> Basically move the print into dpu_hw_set_qos_remap() and then skip out
>> early if nothing changed or print and modify the register.
>> 
>> > This is what
>> > we are doing in downstream. So we need to update the property only if we
>> > are switching from a RT client
>> > to non-RT client for the plane and vice-versa. So we should try to do
>> > the same thing here.
>> >
>> >         is_rt = sde_crtc_is_rt_client(crtc, crtc->state);
>> >         if (is_rt != psde->is_rt_pipe) {
>> >                 psde->is_rt_pipe = is_rt;
>> >                 pstate->dirty |= SDE_PLANE_DIRTY_QOS;
>> >         }
>> >
>> >
>> >         if (pstate->dirty & DPU_PLANE_DIRTY_QOS)
>> >                 _dpu_plane_set_qos_remap(plane);
>> >
>> 
>> Sounds great! Can you send the patch?

Will finalize approach and send the patch in a day or two.

Thanks

Abhinav
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
index 5e8c3f3e6625..5eb2b2ee09f5 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c
@@ -245,9 +245,6 @@  void dpu_vbif_set_qos_remap(struct dpu_kms *dpu_kms,
 	forced_on = mdp->ops.setup_clk_force_ctrl(mdp, params->clk_ctrl, true);
 
 	for (i = 0; i < qos_tbl->npriority_lvl; i++) {
-		DPU_DEBUG("vbif:%d xin:%d lvl:%d/%d\n",
-				params->vbif_idx, params->xin_id, i,
-				qos_tbl->priority_lvl[i]);
 		vbif->ops.set_qos_remap(vbif, params->xin_id, i,
 				qos_tbl->priority_lvl[i]);
 	}