diff mbox series

[v1,4/9] certs: Check that builtin blacklist hashes are valid

Message ID 20201120180426.922572-5-mic@digikod.net
State Superseded
Headers show
Series Enable root to update the blacklist keyring | expand

Commit Message

Mickaël Salaün Nov. 20, 2020, 6:04 p.m. UTC
From: Mickaël Salaün <mic@linux.microsoft.com>

Add and use a check-blacklist-hashes.awk script to make sure that the
builtin blacklist hashes will be approved by the run time blacklist
description checks.  This is useful to debug invalid hash formats, and
it make sure that previous hashes which could have been loaded in the
kernel (but ignored) are now noticed and deal with by the user.

Cc: David Howells <dhowells@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
---
 MAINTAINERS                        |  1 +
 certs/.gitignore                   |  1 +
 certs/Makefile                     | 15 +++++++++++-
 scripts/check-blacklist-hashes.awk | 37 ++++++++++++++++++++++++++++++
 4 files changed, 53 insertions(+), 1 deletion(-)
 create mode 100755 scripts/check-blacklist-hashes.awk

Comments

David Howells Dec. 9, 2020, 11:58 a.m. UTC | #1
Mickaël Salaün <mic@digikod.net> wrote:

> +      cmd_check_blacklist_hashes = $(AWK) -f scripts/check-blacklist-hashes.awk $(2); touch $@


The script name needs prefixing with $(srctree)/ so that it can be used with
alternative build directories.

Note that doesn't apply to scripts/extract-cert in the same makefile as that's
a built program and is to be found in the build dir, not the sources.

Btw, I'm pulling some of your cleanups/fixes into my fixes branch.

David
Mickaël Salaün Dec. 11, 2020, 6:32 p.m. UTC | #2
On 09/12/2020 12:58, David Howells wrote:
> Mickaël Salaün <mic@digikod.net> wrote:

> 

>> +      cmd_check_blacklist_hashes = $(AWK) -f scripts/check-blacklist-hashes.awk $(2); touch $@

> 

> The script name needs prefixing with $(srctree)/ so that it can be used with

> alternative build directories.


Right

> 

> Note that doesn't apply to scripts/extract-cert in the same makefile as that's

> a built program and is to be found in the build dir, not the sources.

> 

> Btw, I'm pulling some of your cleanups/fixes into my fixes branch.


OK, thanks. I'll send a new patch series rebased on your branch.

> 

> David

>
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index e451dcce054f..a5b0c59f55a0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4090,6 +4090,7 @@  L:	keyrings@vger.kernel.org
 S:	Maintained
 F:	Documentation/admin-guide/module-signing.rst
 F:	certs/
+F:	scripts/check-blacklist-hashes.awk
 F:	scripts/extract-cert.c
 F:	scripts/sign-file.c
 
diff --git a/certs/.gitignore b/certs/.gitignore
index 2a2483990686..42cc2ac24b93 100644
--- a/certs/.gitignore
+++ b/certs/.gitignore
@@ -1,2 +1,3 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
+blacklist_hashes_checked
 x509_certificate_list
diff --git a/certs/Makefile b/certs/Makefile
index f4c25b67aad9..36d45b85e069 100644
--- a/certs/Makefile
+++ b/certs/Makefile
@@ -6,7 +6,20 @@ 
 obj-$(CONFIG_SYSTEM_TRUSTED_KEYRING) += system_keyring.o system_certificates.o
 obj-$(CONFIG_SYSTEM_BLACKLIST_KEYRING) += blacklist.o
 ifneq ($(CONFIG_SYSTEM_BLACKLIST_HASH_LIST),"")
+
+quiet_cmd_check_blacklist_hashes = CHECK   $(patsubst "%",%,$(2))
+      cmd_check_blacklist_hashes = $(AWK) -f scripts/check-blacklist-hashes.awk $(2); touch $@
+
+$(eval $(call config_filename,SYSTEM_BLACKLIST_HASH_LIST))
+
+$(obj)/blacklist_hashes.o: $(obj)/blacklist_hashes_checked
+
+targets += blacklist_hashes_checked
+$(obj)/blacklist_hashes_checked: $(SYSTEM_BLACKLIST_HASH_LIST_SRCPREFIX)$(SYSTEM_BLACKLIST_HASH_LIST_FILENAME) scripts/check-blacklist-hashes.awk FORCE
+	$(call if_changed,check_blacklist_hashes,$(SYSTEM_BLACKLIST_HASH_LIST_SRCPREFIX)$(CONFIG_SYSTEM_BLACKLIST_HASH_LIST))
+
 obj-$(CONFIG_SYSTEM_BLACKLIST_KEYRING) += blacklist_hashes.o
+
 else
 obj-$(CONFIG_SYSTEM_BLACKLIST_KEYRING) += blacklist_nohashes.o
 endif
@@ -29,7 +42,7 @@  $(obj)/x509_certificate_list: scripts/extract-cert $(SYSTEM_TRUSTED_KEYS_SRCPREF
 	$(call if_changed,extract_certs,$(SYSTEM_TRUSTED_KEYS_SRCPREFIX)$(CONFIG_SYSTEM_TRUSTED_KEYS))
 endif # CONFIG_SYSTEM_TRUSTED_KEYRING
 
-clean-files := x509_certificate_list .x509.list
+clean-files := x509_certificate_list .x509.list blacklist_hashes_checked
 
 ifeq ($(CONFIG_MODULE_SIG),y)
 ###############################################################################
diff --git a/scripts/check-blacklist-hashes.awk b/scripts/check-blacklist-hashes.awk
new file mode 100755
index 000000000000..4d3c676b7aef
--- /dev/null
+++ b/scripts/check-blacklist-hashes.awk
@@ -0,0 +1,37 @@ 
+#!/usr/bin/awk -f
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright © 2020, Microsoft Corporation. All rights reserved.
+#
+# Author: Mickaël Salaün <mic@linux.microsoft.com>
+#
+# Check that a CONFIG_SYSTEM_BLACKLIST_HASH_LIST file contains a valid array of
+# hash strings.  Such string must start with a prefix ("tbs" or "bin"), then a
+# colon (":"), and finally an even number of hexadecimal lowercase characters
+# (up to 128).
+
+BEGIN {
+	RS = ","
+}
+{
+	if (!match($0, "^[ \t\n\r]*\"([^\"]*)\"[ \t\n\r]*$", part1)) {
+		print "Not a string (item " NR "):", $0;
+		exit 1;
+	}
+	if (!match(part1[1], "^(tbs|bin):(.*)$", part2)) {
+		print "Unknown prefix (item " NR "):", part1[1];
+		exit 1;
+	}
+	if (!match(part2[2], "^([0-9a-z]+)$", part3)) {
+		print "Not a lowercase hexadecimal string (item " NR "):", part2[2];
+		exit 1;
+	}
+	if (length(part3[1]) > 128) {
+		print "Hash string too long (item " NR "):", part3[1];
+		exit 1;
+	}
+	if (length(part3[1]) % 2 == 1) {
+		print "Not an even number of hexadecimal characters (item " NR "):", part3[1];
+		exit 1;
+	}
+}