| Message ID | f2eeee144a2e50540bff77d7bbe7351f154e2742.1606198885.git.viresh.kumar@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | cpufreq_cooling: Get effective CPU utilization from scheduler | expand |
On Tue, Nov 24, 2020 at 7:26 AM Viresh Kumar <viresh.kumar@linaro.org> wrote: > > There is nothing schedutil specific in schedutil_cpu_util(), move it to > core.c and define it only for CONFIG_SMP. > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> For the schedutil part: Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > --- > kernel/sched/core.c | 108 +++++++++++++++++++++++++++++++ > kernel/sched/cpufreq_schedutil.c | 106 ------------------------------ > kernel/sched/sched.h | 12 +--- > 3 files changed, 109 insertions(+), 117 deletions(-) > > diff --git a/kernel/sched/core.c b/kernel/sched/core.c > index d2003a7d5ab5..b81265aec4a0 100644 > --- a/kernel/sched/core.c > +++ b/kernel/sched/core.c > @@ -5117,6 +5117,114 @@ struct task_struct *idle_task(int cpu) > return cpu_rq(cpu)->idle; > } > > +#ifdef CONFIG_SMP > +/* > + * This function computes an effective utilization for the given CPU, to be > + * used for frequency selection given the linear relation: f = u * f_max. > + * > + * The scheduler tracks the following metrics: > + * > + * cpu_util_{cfs,rt,dl,irq}() > + * cpu_bw_dl() > + * > + * Where the cfs,rt and dl util numbers are tracked with the same metric and > + * synchronized windows and are thus directly comparable. > + * > + * The cfs,rt,dl utilization are the running times measured with rq->clock_task > + * which excludes things like IRQ and steal-time. These latter are then accrued > + * in the irq utilization. > + * > + * The DL bandwidth number otoh is not a measured metric but a value computed > + * based on the task model parameters and gives the minimal utilization > + * required to meet deadlines. > + */ > +unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs, > + unsigned long max, enum schedutil_type type, > + struct task_struct *p) > +{ > + unsigned long dl_util, util, irq; > + struct rq *rq = cpu_rq(cpu); > + > + if (!uclamp_is_used() && > + type == FREQUENCY_UTIL && rt_rq_is_runnable(&rq->rt)) { > + return max; > + } > + > + /* > + * Early check to see if IRQ/steal time saturates the CPU, can be > + * because of inaccuracies in how we track these -- see > + * update_irq_load_avg(). > + */ > + irq = cpu_util_irq(rq); > + if (unlikely(irq >= max)) > + return max; > + > + /* > + * Because the time spend on RT/DL tasks is visible as 'lost' time to > + * CFS tasks and we use the same metric to track the effective > + * utilization (PELT windows are synchronized) we can directly add them > + * to obtain the CPU's actual utilization. > + * > + * CFS and RT utilization can be boosted or capped, depending on > + * utilization clamp constraints requested by currently RUNNABLE > + * tasks. > + * When there are no CFS RUNNABLE tasks, clamps are released and > + * frequency will be gracefully reduced with the utilization decay. > + */ > + util = util_cfs + cpu_util_rt(rq); > + if (type == FREQUENCY_UTIL) > + util = uclamp_rq_util_with(rq, util, p); > + > + dl_util = cpu_util_dl(rq); > + > + /* > + * For frequency selection we do not make cpu_util_dl() a permanent part > + * of this sum because we want to use cpu_bw_dl() later on, but we need > + * to check if the CFS+RT+DL sum is saturated (ie. no idle time) such > + * that we select f_max when there is no idle time. > + * > + * NOTE: numerical errors or stop class might cause us to not quite hit > + * saturation when we should -- something for later. > + */ > + if (util + dl_util >= max) > + return max; > + > + /* > + * OTOH, for energy computation we need the estimated running time, so > + * include util_dl and ignore dl_bw. > + */ > + if (type == ENERGY_UTIL) > + util += dl_util; > + > + /* > + * There is still idle time; further improve the number by using the > + * irq metric. Because IRQ/steal time is hidden from the task clock we > + * need to scale the task numbers: > + * > + * max - irq > + * U' = irq + --------- * U > + * max > + */ > + util = scale_irq_capacity(util, irq, max); > + util += irq; > + > + /* > + * Bandwidth required by DEADLINE must always be granted while, for > + * FAIR and RT, we use blocked utilization of IDLE CPUs as a mechanism > + * to gracefully reduce the frequency when no tasks show up for longer > + * periods of time. > + * > + * Ideally we would like to set bw_dl as min/guaranteed freq and util + > + * bw_dl as requested freq. However, cpufreq is not yet ready for such > + * an interface. So, we only do the latter for now. > + */ > + if (type == FREQUENCY_UTIL) > + util += cpu_bw_dl(rq); > + > + return min(max, util); > +} > +#endif /* CONFIG_SMP */ > + > /** > * find_process_by_pid - find a process with a matching PID value. > * @pid: the pid in question. > diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c > index e254745a82cb..2d44befb322b 100644 > --- a/kernel/sched/cpufreq_schedutil.c > +++ b/kernel/sched/cpufreq_schedutil.c > @@ -169,112 +169,6 @@ static unsigned int get_next_freq(struct sugov_policy *sg_policy, > return cpufreq_driver_resolve_freq(policy, freq); > } > > -/* > - * This function computes an effective utilization for the given CPU, to be > - * used for frequency selection given the linear relation: f = u * f_max. > - * > - * The scheduler tracks the following metrics: > - * > - * cpu_util_{cfs,rt,dl,irq}() > - * cpu_bw_dl() > - * > - * Where the cfs,rt and dl util numbers are tracked with the same metric and > - * synchronized windows and are thus directly comparable. > - * > - * The cfs,rt,dl utilization are the running times measured with rq->clock_task > - * which excludes things like IRQ and steal-time. These latter are then accrued > - * in the irq utilization. > - * > - * The DL bandwidth number otoh is not a measured metric but a value computed > - * based on the task model parameters and gives the minimal utilization > - * required to meet deadlines. > - */ > -unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs, > - unsigned long max, enum schedutil_type type, > - struct task_struct *p) > -{ > - unsigned long dl_util, util, irq; > - struct rq *rq = cpu_rq(cpu); > - > - if (!uclamp_is_used() && > - type == FREQUENCY_UTIL && rt_rq_is_runnable(&rq->rt)) { > - return max; > - } > - > - /* > - * Early check to see if IRQ/steal time saturates the CPU, can be > - * because of inaccuracies in how we track these -- see > - * update_irq_load_avg(). > - */ > - irq = cpu_util_irq(rq); > - if (unlikely(irq >= max)) > - return max; > - > - /* > - * Because the time spend on RT/DL tasks is visible as 'lost' time to > - * CFS tasks and we use the same metric to track the effective > - * utilization (PELT windows are synchronized) we can directly add them > - * to obtain the CPU's actual utilization. > - * > - * CFS and RT utilization can be boosted or capped, depending on > - * utilization clamp constraints requested by currently RUNNABLE > - * tasks. > - * When there are no CFS RUNNABLE tasks, clamps are released and > - * frequency will be gracefully reduced with the utilization decay. > - */ > - util = util_cfs + cpu_util_rt(rq); > - if (type == FREQUENCY_UTIL) > - util = uclamp_rq_util_with(rq, util, p); > - > - dl_util = cpu_util_dl(rq); > - > - /* > - * For frequency selection we do not make cpu_util_dl() a permanent part > - * of this sum because we want to use cpu_bw_dl() later on, but we need > - * to check if the CFS+RT+DL sum is saturated (ie. no idle time) such > - * that we select f_max when there is no idle time. > - * > - * NOTE: numerical errors or stop class might cause us to not quite hit > - * saturation when we should -- something for later. > - */ > - if (util + dl_util >= max) > - return max; > - > - /* > - * OTOH, for energy computation we need the estimated running time, so > - * include util_dl and ignore dl_bw. > - */ > - if (type == ENERGY_UTIL) > - util += dl_util; > - > - /* > - * There is still idle time; further improve the number by using the > - * irq metric. Because IRQ/steal time is hidden from the task clock we > - * need to scale the task numbers: > - * > - * max - irq > - * U' = irq + --------- * U > - * max > - */ > - util = scale_irq_capacity(util, irq, max); > - util += irq; > - > - /* > - * Bandwidth required by DEADLINE must always be granted while, for > - * FAIR and RT, we use blocked utilization of IDLE CPUs as a mechanism > - * to gracefully reduce the frequency when no tasks show up for longer > - * periods of time. > - * > - * Ideally we would like to set bw_dl as min/guaranteed freq and util + > - * bw_dl as requested freq. However, cpufreq is not yet ready for such > - * an interface. So, we only do the latter for now. > - */ > - if (type == FREQUENCY_UTIL) > - util += cpu_bw_dl(rq); > - > - return min(max, util); > -} > - > static unsigned long sugov_get_util(struct sugov_cpu *sg_cpu) > { > struct rq *rq = cpu_rq(sg_cpu->cpu); > diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h > index df80bfcea92e..0db6bcf0881f 100644 > --- a/kernel/sched/sched.h > +++ b/kernel/sched/sched.h > @@ -2484,7 +2484,6 @@ static inline unsigned long capacity_orig_of(int cpu) > { > return cpu_rq(cpu)->cpu_capacity_orig; > } > -#endif > > /** > * enum schedutil_type - CPU utilization type > @@ -2501,8 +2500,6 @@ enum schedutil_type { > ENERGY_UTIL, > }; > > -#ifdef CONFIG_CPU_FREQ_GOV_SCHEDUTIL > - > unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs, > unsigned long max, enum schedutil_type type, > struct task_struct *p); > @@ -2533,14 +2530,7 @@ static inline unsigned long cpu_util_rt(struct rq *rq) > { > return READ_ONCE(rq->avg_rt.util_avg); > } > -#else /* CONFIG_CPU_FREQ_GOV_SCHEDUTIL */ > -static inline unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs, > - unsigned long max, enum schedutil_type type, > - struct task_struct *p) > -{ > - return 0; > -} > -#endif /* CONFIG_CPU_FREQ_GOV_SCHEDUTIL */ > +#endif > > #ifdef CONFIG_HAVE_SCHED_AVG_IRQ > static inline unsigned long cpu_util_irq(struct rq *rq) > -- > 2.25.0.rc1.19.g042ed3e048af >
diff --git a/kernel/sched/core.c b/kernel/sched/core.c index d2003a7d5ab5..b81265aec4a0 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5117,6 +5117,114 @@ struct task_struct *idle_task(int cpu) return cpu_rq(cpu)->idle; } +#ifdef CONFIG_SMP +/* + * This function computes an effective utilization for the given CPU, to be + * used for frequency selection given the linear relation: f = u * f_max. + * + * The scheduler tracks the following metrics: + * + * cpu_util_{cfs,rt,dl,irq}() + * cpu_bw_dl() + * + * Where the cfs,rt and dl util numbers are tracked with the same metric and + * synchronized windows and are thus directly comparable. + * + * The cfs,rt,dl utilization are the running times measured with rq->clock_task + * which excludes things like IRQ and steal-time. These latter are then accrued + * in the irq utilization. + * + * The DL bandwidth number otoh is not a measured metric but a value computed + * based on the task model parameters and gives the minimal utilization + * required to meet deadlines. + */ +unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs, + unsigned long max, enum schedutil_type type, + struct task_struct *p) +{ + unsigned long dl_util, util, irq; + struct rq *rq = cpu_rq(cpu); + + if (!uclamp_is_used() && + type == FREQUENCY_UTIL && rt_rq_is_runnable(&rq->rt)) { + return max; + } + + /* + * Early check to see if IRQ/steal time saturates the CPU, can be + * because of inaccuracies in how we track these -- see + * update_irq_load_avg(). + */ + irq = cpu_util_irq(rq); + if (unlikely(irq >= max)) + return max; + + /* + * Because the time spend on RT/DL tasks is visible as 'lost' time to + * CFS tasks and we use the same metric to track the effective + * utilization (PELT windows are synchronized) we can directly add them + * to obtain the CPU's actual utilization. + * + * CFS and RT utilization can be boosted or capped, depending on + * utilization clamp constraints requested by currently RUNNABLE + * tasks. + * When there are no CFS RUNNABLE tasks, clamps are released and + * frequency will be gracefully reduced with the utilization decay. + */ + util = util_cfs + cpu_util_rt(rq); + if (type == FREQUENCY_UTIL) + util = uclamp_rq_util_with(rq, util, p); + + dl_util = cpu_util_dl(rq); + + /* + * For frequency selection we do not make cpu_util_dl() a permanent part + * of this sum because we want to use cpu_bw_dl() later on, but we need + * to check if the CFS+RT+DL sum is saturated (ie. no idle time) such + * that we select f_max when there is no idle time. + * + * NOTE: numerical errors or stop class might cause us to not quite hit + * saturation when we should -- something for later. + */ + if (util + dl_util >= max) + return max; + + /* + * OTOH, for energy computation we need the estimated running time, so + * include util_dl and ignore dl_bw. + */ + if (type == ENERGY_UTIL) + util += dl_util; + + /* + * There is still idle time; further improve the number by using the + * irq metric. Because IRQ/steal time is hidden from the task clock we + * need to scale the task numbers: + * + * max - irq + * U' = irq + --------- * U + * max + */ + util = scale_irq_capacity(util, irq, max); + util += irq; + + /* + * Bandwidth required by DEADLINE must always be granted while, for + * FAIR and RT, we use blocked utilization of IDLE CPUs as a mechanism + * to gracefully reduce the frequency when no tasks show up for longer + * periods of time. + * + * Ideally we would like to set bw_dl as min/guaranteed freq and util + + * bw_dl as requested freq. However, cpufreq is not yet ready for such + * an interface. So, we only do the latter for now. + */ + if (type == FREQUENCY_UTIL) + util += cpu_bw_dl(rq); + + return min(max, util); +} +#endif /* CONFIG_SMP */ + /** * find_process_by_pid - find a process with a matching PID value. * @pid: the pid in question. diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c index e254745a82cb..2d44befb322b 100644 --- a/kernel/sched/cpufreq_schedutil.c +++ b/kernel/sched/cpufreq_schedutil.c @@ -169,112 +169,6 @@ static unsigned int get_next_freq(struct sugov_policy *sg_policy, return cpufreq_driver_resolve_freq(policy, freq); } -/* - * This function computes an effective utilization for the given CPU, to be - * used for frequency selection given the linear relation: f = u * f_max. - * - * The scheduler tracks the following metrics: - * - * cpu_util_{cfs,rt,dl,irq}() - * cpu_bw_dl() - * - * Where the cfs,rt and dl util numbers are tracked with the same metric and - * synchronized windows and are thus directly comparable. - * - * The cfs,rt,dl utilization are the running times measured with rq->clock_task - * which excludes things like IRQ and steal-time. These latter are then accrued - * in the irq utilization. - * - * The DL bandwidth number otoh is not a measured metric but a value computed - * based on the task model parameters and gives the minimal utilization - * required to meet deadlines. - */ -unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs, - unsigned long max, enum schedutil_type type, - struct task_struct *p) -{ - unsigned long dl_util, util, irq; - struct rq *rq = cpu_rq(cpu); - - if (!uclamp_is_used() && - type == FREQUENCY_UTIL && rt_rq_is_runnable(&rq->rt)) { - return max; - } - - /* - * Early check to see if IRQ/steal time saturates the CPU, can be - * because of inaccuracies in how we track these -- see - * update_irq_load_avg(). - */ - irq = cpu_util_irq(rq); - if (unlikely(irq >= max)) - return max; - - /* - * Because the time spend on RT/DL tasks is visible as 'lost' time to - * CFS tasks and we use the same metric to track the effective - * utilization (PELT windows are synchronized) we can directly add them - * to obtain the CPU's actual utilization. - * - * CFS and RT utilization can be boosted or capped, depending on - * utilization clamp constraints requested by currently RUNNABLE - * tasks. - * When there are no CFS RUNNABLE tasks, clamps are released and - * frequency will be gracefully reduced with the utilization decay. - */ - util = util_cfs + cpu_util_rt(rq); - if (type == FREQUENCY_UTIL) - util = uclamp_rq_util_with(rq, util, p); - - dl_util = cpu_util_dl(rq); - - /* - * For frequency selection we do not make cpu_util_dl() a permanent part - * of this sum because we want to use cpu_bw_dl() later on, but we need - * to check if the CFS+RT+DL sum is saturated (ie. no idle time) such - * that we select f_max when there is no idle time. - * - * NOTE: numerical errors or stop class might cause us to not quite hit - * saturation when we should -- something for later. - */ - if (util + dl_util >= max) - return max; - - /* - * OTOH, for energy computation we need the estimated running time, so - * include util_dl and ignore dl_bw. - */ - if (type == ENERGY_UTIL) - util += dl_util; - - /* - * There is still idle time; further improve the number by using the - * irq metric. Because IRQ/steal time is hidden from the task clock we - * need to scale the task numbers: - * - * max - irq - * U' = irq + --------- * U - * max - */ - util = scale_irq_capacity(util, irq, max); - util += irq; - - /* - * Bandwidth required by DEADLINE must always be granted while, for - * FAIR and RT, we use blocked utilization of IDLE CPUs as a mechanism - * to gracefully reduce the frequency when no tasks show up for longer - * periods of time. - * - * Ideally we would like to set bw_dl as min/guaranteed freq and util + - * bw_dl as requested freq. However, cpufreq is not yet ready for such - * an interface. So, we only do the latter for now. - */ - if (type == FREQUENCY_UTIL) - util += cpu_bw_dl(rq); - - return min(max, util); -} - static unsigned long sugov_get_util(struct sugov_cpu *sg_cpu) { struct rq *rq = cpu_rq(sg_cpu->cpu); diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index df80bfcea92e..0db6bcf0881f 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -2484,7 +2484,6 @@ static inline unsigned long capacity_orig_of(int cpu) { return cpu_rq(cpu)->cpu_capacity_orig; } -#endif /** * enum schedutil_type - CPU utilization type @@ -2501,8 +2500,6 @@ enum schedutil_type { ENERGY_UTIL, }; -#ifdef CONFIG_CPU_FREQ_GOV_SCHEDUTIL - unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs, unsigned long max, enum schedutil_type type, struct task_struct *p); @@ -2533,14 +2530,7 @@ static inline unsigned long cpu_util_rt(struct rq *rq) { return READ_ONCE(rq->avg_rt.util_avg); } -#else /* CONFIG_CPU_FREQ_GOV_SCHEDUTIL */ -static inline unsigned long schedutil_cpu_util(int cpu, unsigned long util_cfs, - unsigned long max, enum schedutil_type type, - struct task_struct *p) -{ - return 0; -} -#endif /* CONFIG_CPU_FREQ_GOV_SCHEDUTIL */ +#endif #ifdef CONFIG_HAVE_SCHED_AVG_IRQ static inline unsigned long cpu_util_irq(struct rq *rq)
There is nothing schedutil specific in schedutil_cpu_util(), move it to core.c and define it only for CONFIG_SMP. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- kernel/sched/core.c | 108 +++++++++++++++++++++++++++++++ kernel/sched/cpufreq_schedutil.c | 106 ------------------------------ kernel/sched/sched.h | 12 +--- 3 files changed, 109 insertions(+), 117 deletions(-) -- 2.25.0.rc1.19.g042ed3e048af