| Message ID | E1khJyS-0003UU-9O@rmk-PC.armlinux.org.uk |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [net-next] net: sfp: add debugfs support | expand |
On Tue, Nov 24, 2020 at 09:49:16AM +0000, Russell King - ARM Linux admin wrote: > On Tue, Nov 24, 2020 at 10:41:51AM +0200, Ido Schimmel wrote: > > On Tue, Nov 24, 2020 at 01:14:31AM +0100, Andrew Lunn wrote: > > > On Mon, Nov 23, 2020 at 10:06:16PM +0000, Russell King wrote: > > > > Add debugfs support to SFP so that the internal state of the SFP state > > > > machines and hardware signal state can be viewed from userspace, rather > > > > than having to compile a debug kernel to view state state transitions > > > > in the kernel log. The 'state' output looks like: > > > > > > > > Module state: empty > > > > Module probe attempts: 0 0 > > > > Device state: up > > > > Main state: down > > > > Fault recovery remaining retries: 5 > > > > PHY probe remaining retries: 12 > > > > moddef0: 0 > > > > rx_los: 1 > > > > tx_fault: 1 > > > > tx_disable: 1 > > > > > > > > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> > > > > > > Hi Russell > > > > > > This looks useful. I always seem to end up recompiling the kernel, > > > which as you said, this should avoid. > > > > FWIW, another option is to use drgn [1]. Especially when the state is > > queried from the kernel and not hardware. We are using that in mlxsw > > [2][3]. > > Presumably that requires /proc/kcore support, which 32-bit ARM doesn't > have. Yes, it does seem to be required for live debugging. I mostly work with x86 systems, I guess it's completely different for Andrew and you.
Jakub, What's your opinion on this patch? It seems to have stalled... Regards, Russell On Tue, Nov 24, 2020 at 12:46:40PM +0200, Ido Schimmel wrote: > On Tue, Nov 24, 2020 at 09:49:16AM +0000, Russell King - ARM Linux admin wrote: > > On Tue, Nov 24, 2020 at 10:41:51AM +0200, Ido Schimmel wrote: > > > On Tue, Nov 24, 2020 at 01:14:31AM +0100, Andrew Lunn wrote: > > > > On Mon, Nov 23, 2020 at 10:06:16PM +0000, Russell King wrote: > > > > > Add debugfs support to SFP so that the internal state of the SFP state > > > > > machines and hardware signal state can be viewed from userspace, rather > > > > > than having to compile a debug kernel to view state state transitions > > > > > in the kernel log. The 'state' output looks like: > > > > > > > > > > Module state: empty > > > > > Module probe attempts: 0 0 > > > > > Device state: up > > > > > Main state: down > > > > > Fault recovery remaining retries: 5 > > > > > PHY probe remaining retries: 12 > > > > > moddef0: 0 > > > > > rx_los: 1 > > > > > tx_fault: 1 > > > > > tx_disable: 1 > > > > > > > > > > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> > > > > > > > > Hi Russell > > > > > > > > This looks useful. I always seem to end up recompiling the kernel, > > > > which as you said, this should avoid. > > > > > > FWIW, another option is to use drgn [1]. Especially when the state is > > > queried from the kernel and not hardware. We are using that in mlxsw > > > [2][3]. > > > > Presumably that requires /proc/kcore support, which 32-bit ARM doesn't > > have. > > Yes, it does seem to be required for live debugging. I mostly work with > x86 systems, I guess it's completely different for Andrew and you. > -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
On Wed, 2 Dec 2020 13:03:18 +0000 Russell King - ARM Linux admin wrote: > Jakub, > > What's your opinion on this patch? It seems to have stalled... Sorry, I think I expected someone to do the obvious questioning.. > On Tue, Nov 24, 2020 at 12:46:40PM +0200, Ido Schimmel wrote: > > On Tue, Nov 24, 2020 at 09:49:16AM +0000, Russell King - ARM Linux admin wrote: > > > On Tue, Nov 24, 2020 at 10:41:51AM +0200, Ido Schimmel wrote: > > > > On Tue, Nov 24, 2020 at 01:14:31AM +0100, Andrew Lunn wrote: > > > > > On Mon, Nov 23, 2020 at 10:06:16PM +0000, Russell King wrote: > > > > > > Add debugfs support to SFP so that the internal state of the SFP state > > > > > > machines and hardware signal state can be viewed from userspace, rather > > > > > > than having to compile a debug kernel to view state state transitions > > > > > > in the kernel log. The 'state' output looks like: > > > > > > > > > > > > Module state: empty > > > > > > Module probe attempts: 0 0 > > > > > > Device state: up > > > > > > Main state: down > > > > > > Fault recovery remaining retries: 5 > > > > > > PHY probe remaining retries: 12 Perfectly reasonable, no objections. > > > > > > moddef0: 0 > > > > > > rx_los: 1 > > > > > > tx_fault: 1 > > > > > > tx_disable: 1 These, tho, are standard SFP signals, right? Maybe we should put them in struct ethtool_link_ext_state_info? I remember that various "vendor tools" report those, maybe it'd be nice to have a standard way of exposing those signals tru ethtool APIs? Opinions welcome (let me CC more NIC people)! > > > > > > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> > > > > > > > > > > Hi Russell > > > > > > > > > > This looks useful. I always seem to end up recompiling the kernel, > > > > > which as you said, this should avoid. > > > > > > > > FWIW, another option is to use drgn [1]. Especially when the state is > > > > queried from the kernel and not hardware. We are using that in mlxsw > > > > [2][3]. > > > > > > Presumably that requires /proc/kcore support, which 32-bit ARM doesn't > > > have. > > > > Yes, it does seem to be required for live debugging. I mostly work with > > x86 systems, I guess it's completely different for Andrew and you.
On Wed, 2 Dec 2020 08:59:13 -0800 Jakub Kicinski wrote: > On Wed, 2 Dec 2020 13:03:18 +0000 Russell King - ARM Linux admin wrote: > > Jakub, > > > > What's your opinion on this patch? It seems to have stalled... > > Sorry, I think I expected someone to do the obvious questioning.. Ah, no! I know what happened... Check out patchwork: https://patchwork.kernel.org/project/netdevbpf/patch/E1khJyS-0003UU-9O@rmk-PC.armlinux.org.uk/ It says the patch did not apply cleanly to net-next ;) Regardless let's hear what people thing about using ext_link (or similar) for the SFP signals.
On Wed, Dec 02, 2020 at 09:01:47AM -0800, Jakub Kicinski wrote: > On Wed, 2 Dec 2020 08:59:13 -0800 Jakub Kicinski wrote: > > On Wed, 2 Dec 2020 13:03:18 +0000 Russell King - ARM Linux admin wrote: > > > Jakub, > > > > > > What's your opinion on this patch? It seems to have stalled... > > > > Sorry, I think I expected someone to do the obvious questioning.. > > Ah, no! I know what happened... Check out patchwork: > > https://patchwork.kernel.org/project/netdevbpf/patch/E1khJyS-0003UU-9O@rmk-PC.armlinux.org.uk/ > > It says the patch did not apply cleanly to net-next ;) > > Regardless let's hear what people thing about using ext_link (or > similar) for the SFP signals. There seems to have been no replies... I think I'll resend with Andrew's r-b tag. If something better comes along in the future, we can always change it - debugfs isn't an API. -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 1e347afa951e..2c32aa891f17 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/acpi.h> #include <linux/ctype.h> +#include <linux/debugfs.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/hwmon.h> @@ -258,6 +259,9 @@ struct sfp { char *hwmon_name; #endif +#if IS_ENABLED(CONFIG_DEBUG_FS) + struct dentry *debugfs_dir; +#endif }; static bool sff_module_supported(const struct sfp_eeprom_id *id) @@ -1390,6 +1394,54 @@ static void sfp_module_tx_enable(struct sfp *sfp) sfp_set_state(sfp, sfp->state); } +#if IS_ENABLED(CONFIG_DEBUG_FS) +static int sfp_debug_state_show(struct seq_file *s, void *data) +{ + struct sfp *sfp = s->private; + + seq_printf(s, "Module state: %s\n", + mod_state_to_str(sfp->sm_mod_state)); + seq_printf(s, "Module probe attempts: %d %d\n", + R_PROBE_RETRY_INIT - sfp->sm_mod_tries_init, + R_PROBE_RETRY_SLOW - sfp->sm_mod_tries); + seq_printf(s, "Device state: %s\n", + dev_state_to_str(sfp->sm_dev_state)); + seq_printf(s, "Main state: %s\n", + sm_state_to_str(sfp->sm_state)); + seq_printf(s, "Fault recovery remaining retries: %d\n", + sfp->sm_fault_retries); + seq_printf(s, "PHY probe remaining retries: %d\n", + sfp->sm_phy_retries); + seq_printf(s, "moddef0: %d\n", !!(sfp->state & SFP_F_PRESENT)); + seq_printf(s, "rx_los: %d\n", !!(sfp->state & SFP_F_LOS)); + seq_printf(s, "tx_fault: %d\n", !!(sfp->state & SFP_F_TX_FAULT)); + seq_printf(s, "tx_disable: %d\n", !!(sfp->state & SFP_F_TX_DISABLE)); + return 0; +} +DEFINE_SHOW_ATTRIBUTE(sfp_debug_state); + +static void sfp_debugfs_init(struct sfp *sfp) +{ + sfp->debugfs_dir = debugfs_create_dir(dev_name(sfp->dev), NULL); + + debugfs_create_file("state", 0600, sfp->debugfs_dir, sfp, + &sfp_debug_state_fops); +} + +static void sfp_debugfs_exit(struct sfp *sfp) +{ + debugfs_remove_recursive(sfp->debugfs_dir); +} +#else +static void sfp_debugfs_init(struct sfp *sfp) +{ +} + +static void sfp_debugfs_exit(struct sfp *sfp) +{ +} +#endif + static void sfp_module_tx_fault_reset(struct sfp *sfp) { unsigned int state = sfp->state; @@ -2472,6 +2524,8 @@ static int sfp_probe(struct platform_device *pdev) return -ENOMEM; } + sfp_debugfs_init(sfp); + return 0; } @@ -2479,6 +2533,7 @@ static int sfp_remove(struct platform_device *pdev) { struct sfp *sfp = platform_get_drvdata(pdev); + sfp_debugfs_exit(sfp); sfp_unregister_socket(sfp->sfp_bus); rtnl_lock();
Add debugfs support to SFP so that the internal state of the SFP state machines and hardware signal state can be viewed from userspace, rather than having to compile a debug kernel to view state state transitions in the kernel log. The 'state' output looks like: Module state: empty Module probe attempts: 0 0 Device state: up Main state: down Fault recovery remaining retries: 5 PHY probe remaining retries: 12 moddef0: 0 rx_los: 1 tx_fault: 1 tx_disable: 1 Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> --- This is useful to view the state of the SFP cage when e.g., debugging a module that the link doesn't seem to be coming up for. Rather than sending this patch each time there is a query, it seems sensible to merge it into mainline instead. drivers/net/phy/sfp.c | 55 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+)