diff mbox series

[v2,3/3] spi: dt-bindings: document zero value for spi-{rx,tx}-bus-width properties

Message ID 20201124102152.16548-3-alexandru.ardelean@analog.com
State Superseded
Headers show
Series [v2,1/3] spi: convert to BIT() all spi_device flags | expand

Commit Message

Alexandru Ardelean Nov. 24, 2020, 10:21 a.m. UTC
Following a change to the SPI framework, providing a value of zero for
'spi-rx-bus-width' and 'spi-tx-bus-width' is now possible and will
essentially mean than no RX or TX is allowed.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---

Changelog v1 -> v2:
* https://lore.kernel.org/linux-spi/20201111141529.98147-1-alexandru.ardelean@analog.com/
* add patch 'spi: dt-bindings: document zero value for spi-{rx,tx}-bus-width properties'

 Documentation/devicetree/bindings/spi/spi-controller.yaml | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 1b56d5e40f1f..f1aaaf9b3709 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -125,8 +125,9 @@  patternProperties:
       spi-rx-bus-width:
         description:
           Bus width to the SPI bus used for read transfers.
+          If 0 is provided, then no RX will be possible on this devices.
         $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [1, 2, 4, 8]
+        enum: [0, 1, 2, 4, 8]
         default: 1
 
       spi-rx-delay-us:
@@ -136,8 +137,9 @@  patternProperties:
       spi-tx-bus-width:
         description:
           Bus width to the SPI bus used for write transfers.
+          If 0 is provided, then no RX will be possible on this devices.
         $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [1, 2, 4, 8]
+        enum: [0, 1, 2, 4, 8]
         default: 1
 
       spi-tx-delay-us: