@@ -33,6 +33,7 @@
#include <linux/pm_runtime.h>
#include <linux/omap-gpmc-nand.h>
#include <linux/platform_data/mtd-nand-omap2.h>
+#include <linux/bitops.h>
#include <asm/mach-types.h>
@@ -114,6 +115,20 @@
#define GPMC_NR_WAITPINS 4
+/* GPMC Prefetch/Write-post Engine */
+#define GPMC_PREFETCH_CONFIG1_ENABLE_PREFETCH BIT(7)
+#define GPMC_PREFETCH_CONFIG1_DMAMODE BIT(2)
+#define GPMC_PREFETCH_CONFIG1_ACCESSMODE BIT(0)
+#define GPMC_PREFETCH_CONFIG1_CS_MASK GENMASK(26, 24)
+#define GPMC_PREFETCH_CONFIG1_CS_SHIFT 24
+#define GPMC_PREFETCH_CONFIG1_FIFOTH_MASK GENMASK(14, 8)
+#define GPMC_PREFETCH_CONFIG1_FIFOTH_SHIFT 8
+
+#define GPMC_PREFETCH_CONTROL_START BIT(0)
+
+#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
+#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
+
/* XXX: Only NAND irq has been considered,currently these are the only ones used
*/
#define GPMC_NR_IRQ 2
@@ -1971,3 +1986,122 @@ void omap_gpmc_write_reg(int cs, enum omap_gpmc_reg reg, u32 val)
break;
}
}
+
+/**
+ * omap_gpmc_prefetch_start - configures and starts the prefetch engine
+ *
+ * @cs: cs (chip select) number
+ * @fifo_th: fifo threshold to be used for read/ write
+ * @dma: dma mode enable (1) or disable (0)
+ * @count: number of bytes to be transferred
+ * @is_write: prefetch read(0) or write post(1) mode
+ *
+ * As there is a single prefetch engine that must be shared between
+ * chip selects containing NAND flashes, the function returns -EBUSY if
+ * the engine is already in use. Returns 0 on success.
+ */
+int omap_gpmc_prefetch_start(int cs, int fifo_th, bool dma,
+ u32 count, int is_write)
+{
+ u32 val;
+
+ if (!gpmc_dev)
+ return -ENODEV;
+
+ if (cs >= gpmc_cs_num)
+ return -EINVAL;
+
+ if (fifo_th > GPMC_PREFETCH_FIFOTHRESHOLD_MAX)
+ return -EINVAL;
+
+ /* Check if engine is already in use */
+ if (gpmc_read_reg(GPMC_PREFETCH_CONTROL))
+ return -EBUSY;
+
+ /* Set the amount of bytes to be prefetched */
+ gpmc_write_reg(GPMC_PREFETCH_CONFIG2, count);
+
+ /* Set dma/mpu mode, the prefetch read / post write and
+ * enable the engine. Set which cs is has requested for.
+ */
+ val = ((cs << GPMC_PREFETCH_CONFIG1_CS_SHIFT) |
+ GPMC_PREFETCH_CONFIG1_ENABLE_PREFETCH |
+ (GPMC_PREFETCH_CONFIG1_ACCESSMODE & is_write));
+
+ val |= (fifo_th << GPMC_PREFETCH_CONFIG1_FIFOTH_SHIFT) &
+ GPMC_PREFETCH_CONFIG1_FIFOTH_MASK;
+
+ if (dma)
+ val |= GPMC_PREFETCH_CONFIG1_DMAMODE;
+
+ gpmc_write_reg(GPMC_PREFETCH_CONFIG1, val);
+
+ /* Start the prefetch engine */
+ gpmc_write_reg(GPMC_PREFETCH_CONTROL, GPMC_PREFETCH_CONTROL_START);
+
+ return 0;
+}
+
+/**
+ * omap_gpmc_prefetch_stop - stops and disables the prefetch engine
+ *
+ * @cs: Chip select number
+ */
+int omap_gpmc_prefetch_stop(int cs)
+{
+ u32 config1;
+
+ if (!gpmc_dev)
+ return -ENODEV;
+
+ if (cs >= gpmc_cs_num)
+ return -EINVAL;
+
+ /* check if the same module/cs is trying to reset */
+ config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
+ config1 &= GPMC_PREFETCH_CONFIG1_CS_MASK;
+
+ if ((config1 >> GPMC_PREFETCH_CONFIG1_CS_SHIFT) != cs)
+ return -EINVAL;
+
+ /* Stop the engine */
+ gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0);
+
+ /* Reset/disable the engine */
+ gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0);
+
+ return 0;
+}
+
+/**
+ * omap_gpmc_get_prefetch_count - Returns the number of bytes remaining to be
+ * read or written by the prefetch/write-post engine
+ */
+u32 omap_gpmc_get_prefetch_count(void)
+{
+ u32 count;
+
+ if (!gpmc_dev)
+ return 0;
+
+ count = gpmc_read_reg(GPMC_PREFETCH_STATUS);
+ count = GPMC_PREFETCH_STATUS_COUNT(count);
+ return count;
+}
+
+/**
+ * omap_gpmc_get_prefetch_fifo_count - Returns the number of bytes available
+ * to be read from the FIFO or free bytes available to be written to the FIFO
+ * by the CPU
+ */
+u32 omap_gpmc_get_prefetch_fifo_count(void)
+{
+ u32 count;
+
+ if (!gpmc_dev)
+ return 0;
+
+ count = gpmc_read_reg(GPMC_PREFETCH_STATUS);
+ count = GPMC_PREFETCH_STATUS_FIFO_CNT(count);
+ return count;
+}
@@ -26,6 +26,12 @@ enum omap_gpmc_reg {
#ifdef CONFIG_ARCH_OMAP2PLUS
u32 omap_gpmc_read_reg(int cs, enum omap_gpmc_reg reg);
void omap_gpmc_write_reg(int cs, enum omap_gpmc_reg reg, u32 val);
+
+int omap_gpmc_prefetch_start(int cs, int fifo_th, bool dma,
+ u32 count, int is_write);
+int omap_gpmc_prefetch_stop(int cs);
+u32 omap_gpmc_get_prefetch_count(void);
+u32 omap_gpmc_get_prefetch_fifo_count(void);
#else
static inline u32 omap_gpmc_read_reg(int cs, enum omap_gpmc_reg reg)
{
@@ -35,6 +41,30 @@ static inline u32 omap_gpmc_read_reg(int cs, enum omap_gpmc_reg reg)
static inline void omap_gpmc_write_reg(int cs, enum omap_gpmc_reg reg, u32 val)
{
}
+
+static inline int omap_gpmc_prefetch_start(int cs, int fifo_th, bool dma,
+ u32 count, int is_write)
+{
+ return -ENOSYS;
+}
+
+static inline int omap_gpmc_prefetch_stop(int cs)
+{
+ return -ENOSYS;
+}
+
+static inline u32 omap_gpmc_get_prefetch_count(void)
+{
+ return 0;
+}
+
+static inline u32 omap_gpmc_get_prefetch_fifo_count(void)
+{
+ return 0;
+}
#endif
+/* Prefetch/Write-post Engine */
+#define GPMC_PREFETCH_FIFOTHRESHOLD_MAX 0x40
+
#endif /* _GPMC_OMAP_H_ */
Even though the Prefetch engine is meant for exclusive use by the OMAP NAND controller, itst registers belong to the GPMC controller's register space. Introduce 4 APIs to access the Prefetch/Write-post engine. int omap_gpmc_prefetch_start(int cs, int fifo_th, bool dma, u32 count, int is_write); int omap_gpmc_prefetch_stop(int cs); u32 omap_gpmc_get_prefetch_count(void); u32 omap_gpmc_get_prefetch_fifo_count(void); Signed-off-by: Roger Quadros <rogerq@ti.com> --- arch/arm/mach-omap2/gpmc.c | 134 +++++++++++++++++++++++++++++++++++++++++ include/linux/omap-gpmc-nand.h | 30 +++++++++ 2 files changed, 164 insertions(+)