@@ -106,6 +106,10 @@
status = "okay";
};
+ miphy@eb800000 {
+ status = "okay";
+ };
+
cf@b2800000 {
status = "okay";
};
@@ -29,24 +29,111 @@
#gpio-cells = <2>;
};
- ahci@b1000000 {
+ miphy0: miphy@eb800000 {
+ compatible = "st,spear1310-miphy";
+ reg = <0xeb800000 0x4000>;
+ misc = <&misc>;
+ phy-id = <0>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ miphy1: miphy@eb804000 {
+ compatible = "st,spear1310-miphy";
+ reg = <0xeb804000 0x4000>;
+ misc = <&misc>;
+ phy-id = <1>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ miphy2: miphy@eb808000 {
+ compatible = "st,spear1310-miphy";
+ reg = <0xeb808000 0x4000>;
+ misc = <&misc>;
+ phy-id = <2>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ ahci0: ahci@b1000000 {
compatible = "snps,spear-ahci";
reg = <0xb1000000 0x10000>;
interrupts = <0 68 0x4>;
+ phys = <&miphy0 0>;
+ phy-names = "sata-phy";
status = "disabled";
};
- ahci@b1800000 {
+ ahci1: ahci@b1800000 {
compatible = "snps,spear-ahci";
reg = <0xb1800000 0x10000>;
interrupts = <0 69 0x4>;
+ phys = <&miphy1 0>;
+ phy-names = "sata-phy";
status = "disabled";
};
- ahci@b4000000 {
+ ahci2: ahci@b4000000 {
compatible = "snps,spear-ahci";
reg = <0xb4000000 0x10000>;
interrupts = <0 70 0x4>;
+ phys = <&miphy2 0>;
+ phy-names = "sata-phy";
+ status = "disabled";
+ };
+
+ pcie0: pcie@b1000000 {
+ compatible = "st,spear1340-pcie", "snps,dw-pcie";
+ reg = <0xb1000000 0x4000>;
+ interrupts = <0 68 0x4>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0x0 0 &gic 0 68 0x4>;
+ num-lanes = <1>;
+ phys = <&miphy0 1>;
+ phy-names = "pcie-phy";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000 /* configuration space */
+ 0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
+ status = "disabled";
+ };
+
+ pcie1: pcie@b1800000 {
+ compatible = "st,spear1340-pcie", "snps,dw-pcie";
+ reg = <0xb1800000 0x4000>;
+ interrupts = <0 69 0x4>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0x0 0 &gic 0 69 0x4>;
+ num-lanes = <1>;
+ phys = <&miphy1 1>;
+ phy-names = "pcie-phy";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x00000800 0 0x90000000 0x90000000 0 0x00020000 /* configuration space */
+ 0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */
+ status = "disabled";
+ };
+
+ pcie2: pcie@b4000000 {
+ compatible = "st,spear1340-pcie", "snps,dw-pcie";
+ reg = <0xb4000000 0x4000>;
+ interrupts = <0 70 0x4>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0x0 0 &gic 0 70 0x4>;
+ num-lanes = <1>;
+ phys = <&miphy2 1>;
+ phy-names = "pcie-phy";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x00000800 0 0xc0000000 0xc0000000 0 0x00020000 /* configuration space */
+ 0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
status = "disabled";
};
@@ -122,6 +122,10 @@
status = "okay";
};
+ miphy@eb800000 {
+ status = "okay";
+ };
+
dma@ea800000 {
status = "okay";
};
@@ -31,10 +31,38 @@
status = "disabled";
};
- ahci@b1000000 {
+ miphy0: miphy@eb800000 {
+ compatible = "st,spear1340-miphy";
+ reg = <0xeb800000 0x4000>;
+ misc = <&misc>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ ahci0: ahci@b1000000 {
compatible = "snps,spear-ahci";
reg = <0xb1000000 0x10000>;
interrupts = <0 72 0x4>;
+ phys = <&miphy0 0>;
+ phy-names = "sata-phy";
+ status = "disabled";
+ };
+
+ pcie0: pcie@b1000000 {
+ compatible = "st,spear1340-pcie", "snps,dw-pcie";
+ reg = <0xb1000000 0x4000>;
+ interrupts = <0 68 0x4>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0x0 0 &gic 0 68 0x4>;
+ num-lanes = <1>;
+ phys = <&miphy0 1>;
+ phy-names = "pcie-phy";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000 /* configuration space */
+ 0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
status = "disabled";
};
@@ -83,8 +83,8 @@
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x50000000 0x50000000 0x10000000
- 0xb0000000 0xb0000000 0x10000000
- 0xd0000000 0xd0000000 0x02000000
+ 0x80000000 0x80000000 0x20000000
+ 0xb0000000 0xb0000000 0x22000000
0xd8000000 0xd8000000 0x01000000
0xe0000000 0xe0000000 0x10000000>;
@@ -20,6 +20,7 @@ config ARCH_SPEAR13XX
select HAVE_ARM_TWD if SMP
select PINCTRL
select MFD_SYSCON
+ select MIGHT_HAVE_PCI
help
Supports for ARM's SPEAR13XX family
@@ -28,12 +29,14 @@ if ARCH_SPEAR13XX
config MACH_SPEAR1310
bool "SPEAr1310 Machine support with Device Tree"
select PINCTRL_SPEAR1310
+ select PHY_ST_SPEAR1310_MIPHY
help
Supports ST SPEAr1310 machine configured via the device-tree
config MACH_SPEAR1340
bool "SPEAr1340 Machine support with Device Tree"
select PINCTRL_SPEAR1340
+ select PHY_ST_SPEAR1340_MIPHY
help
Supports ST SPEAr1340 machine configured via the device-tree
@@ -13,136 +13,13 @@
#define pr_fmt(fmt) "SPEAr1340: " fmt
-#include <linux/ahci_platform.h>
-#include <linux/amba/serial.h>
-#include <linux/delay.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include "generic.h"
-#include <mach/spear.h>
-
-/* FIXME: Move SATA PHY code into a standalone driver */
-
-/* Base addresses */
-#define SPEAR1340_SATA_BASE UL(0xB1000000)
-
-/* Power Management Registers */
-#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100)
-#define SPEAR1340_PCM_WKUP_CFG (VA_MISC_BASE + 0x104)
-#define SPEAR1340_SWITCH_CTR (VA_MISC_BASE + 0x108)
-
-#define SPEAR1340_PERIP1_SW_RST (VA_MISC_BASE + 0x318)
-#define SPEAR1340_PERIP2_SW_RST (VA_MISC_BASE + 0x31C)
-#define SPEAR1340_PERIP3_SW_RST (VA_MISC_BASE + 0x320)
-
-/* PCIE - SATA configuration registers */
-#define SPEAR1340_PCIE_SATA_CFG (VA_MISC_BASE + 0x424)
- /* PCIE CFG MASks */
- #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT (1 << 11)
- #define SPEAR1340_PCIE_CFG_POWERUP_RESET (1 << 10)
- #define SPEAR1340_PCIE_CFG_CORE_CLK_EN (1 << 9)
- #define SPEAR1340_PCIE_CFG_AUX_CLK_EN (1 << 8)
- #define SPEAR1340_SATA_CFG_TX_CLK_EN (1 << 4)
- #define SPEAR1340_SATA_CFG_RX_CLK_EN (1 << 3)
- #define SPEAR1340_SATA_CFG_POWERUP_RESET (1 << 2)
- #define SPEAR1340_SATA_CFG_PM_CLK_EN (1 << 1)
- #define SPEAR1340_PCIE_SATA_SEL_PCIE (0)
- #define SPEAR1340_PCIE_SATA_SEL_SATA (1)
- #define SPEAR1340_SATA_PCIE_CFG_MASK 0xF1F
- #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
- SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
- SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
- SPEAR1340_PCIE_CFG_POWERUP_RESET | \
- SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
- #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
- SPEAR1340_SATA_CFG_PM_CLK_EN | \
- SPEAR1340_SATA_CFG_POWERUP_RESET | \
- SPEAR1340_SATA_CFG_RX_CLK_EN | \
- SPEAR1340_SATA_CFG_TX_CLK_EN)
-
-#define SPEAR1340_PCIE_MIPHY_CFG (VA_MISC_BASE + 0x428)
- #define SPEAR1340_MIPHY_OSC_BYPASS_EXT (1 << 31)
- #define SPEAR1340_MIPHY_CLK_REF_DIV2 (1 << 27)
- #define SPEAR1340_MIPHY_CLK_REF_DIV4 (2 << 27)
- #define SPEAR1340_MIPHY_CLK_REF_DIV8 (3 << 27)
- #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
- #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
- (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
- SPEAR1340_MIPHY_CLK_REF_DIV2 | \
- SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
- #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
- (SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
- #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
- (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
- SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
-
-/* SATA device registration */
-static int sata_miphy_init(struct device *dev, void __iomem *addr)
-{
- writel(SPEAR1340_SATA_CFG_VAL, SPEAR1340_PCIE_SATA_CFG);
- writel(SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK,
- SPEAR1340_PCIE_MIPHY_CFG);
- /* Switch on sata power domain */
- writel((readl(SPEAR1340_PCM_CFG) | (0x800)), SPEAR1340_PCM_CFG);
- msleep(20);
- /* Disable PCIE SATA Controller reset */
- writel((readl(SPEAR1340_PERIP1_SW_RST) & (~0x1000)),
- SPEAR1340_PERIP1_SW_RST);
- msleep(20);
-
- return 0;
-}
-
-void sata_miphy_exit(struct device *dev)
-{
- writel(0, SPEAR1340_PCIE_SATA_CFG);
- writel(0, SPEAR1340_PCIE_MIPHY_CFG);
-
- /* Enable PCIE SATA Controller reset */
- writel((readl(SPEAR1340_PERIP1_SW_RST) | (0x1000)),
- SPEAR1340_PERIP1_SW_RST);
- msleep(20);
- /* Switch off sata power domain */
- writel((readl(SPEAR1340_PCM_CFG) & (~0x800)), SPEAR1340_PCM_CFG);
- msleep(20);
-}
-
-int sata_suspend(struct device *dev)
-{
- if (dev->power.power_state.event == PM_EVENT_FREEZE)
- return 0;
-
- sata_miphy_exit(dev);
-
- return 0;
-}
-
-int sata_resume(struct device *dev)
-{
- if (dev->power.power_state.event == PM_EVENT_THAW)
- return 0;
-
- return sata_miphy_init(dev, NULL);
-}
-
-static struct ahci_platform_data sata_pdata = {
- .init = sata_miphy_init,
- .exit = sata_miphy_exit,
- .suspend = sata_suspend,
- .resume = sata_resume,
-};
-
-/* Add SPEAr1340 auxdata to pass platform data */
-static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
- &sata_pdata),
- {}
-};
static void __init spear1340_dt_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- spear1340_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
platform_device_register_simple("spear-cpufreq", -1, NULL, 0);
}