diff mbox series

[v2,net-next,1/4] dt-bindings: net: nfc: s3fwrn5: Support a UART interface

Message ID 1606737627-29485-1-git-send-email-bongsu.jeon@samsung.com
State Superseded
Headers show
Series [v2,net-next,1/4] dt-bindings: net: nfc: s3fwrn5: Support a UART interface | expand

Commit Message

Bongsu Jeon Nov. 30, 2020, noon UTC
From: Bongsu Jeon <bongsu.jeon@samsung.com>

Since S3FWRN82 NFC Chip, The UART interface can be used.
S3FWRN82 supports I2C and UART interface.

Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
---

Changes in v2:
 -change the compatible name.
 -change the const to enum for compatible.
 -change the node name to nfc.

 .../bindings/net/nfc/samsung,s3fwrn5.yaml          | 32 ++++++++++++++++++++--
 1 file changed, 29 insertions(+), 3 deletions(-)

Comments

Krzysztof Kozlowski Nov. 30, 2020, 6:29 p.m. UTC | #1
On Mon, Nov 30, 2020 at 08:55:42AM -0800, Jakub Kicinski wrote:
> On Mon, 30 Nov 2020 21:00:27 +0900 Bongsu jeon wrote:
> > From: Bongsu Jeon <bongsu.jeon@samsung.com>
> > 
> > Since S3FWRN82 NFC Chip, The UART interface can be used.
> > S3FWRN82 supports I2C and UART interface.
> > 
> > Signed-off-by: Bongsu Jeon <bongsu.jeon@samsung.com>
> 
> All patches in the series should have the same version.
> 
> If the patch was not changes in the given repost you can add:
> 
>  v3:
>   - no change
> 
> Or just not mention the version in the changelog.
> 
> It's also best to provide a cover letter describing what the series
> does as a whole for series with more than 2 patches.

Beside that I received just 1/4 of v2. LKML has one as well:
https://lore.kernel.org/lkml/1606737627-29485-1-git-send-email-bongsu.jeon@samsung.com/

Where are the others?

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
index cb0b8a5..481bbcc 100644
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -12,7 +12,10 @@  maintainers:
 
 properties:
   compatible:
-    const: samsung,s3fwrn5-i2c
+    oneOf:
+      - enum:
+        - samsung,s3fwrn5-i2c
+        - samsung,s3fwrn82
 
   en-gpios:
     maxItems: 1
@@ -47,10 +50,19 @@  additionalProperties: false
 required:
   - compatible
   - en-gpios
-  - interrupts
-  - reg
   - wake-gpios
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s3fwrn5-i2c
+    then:
+      required:
+        - interrupts
+        - reg
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
@@ -71,3 +83,17 @@  examples:
             wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
         };
     };
+  # UART example on Raspberry Pi
+  - |
+    uart0 {
+        status = "okay";
+
+        nfc {
+            compatible = "samsung,s3fwrn82";
+
+            en-gpios = <&gpio 20 0>;
+            wake-gpios = <&gpio 16 0>;
+
+            status = "okay";
+        };
+    };