diff mbox series

[net-next,2/9] mlxsw: reg: Add et_vlan field to SPVID register

Message ID 20201129125407.1391557-3-idosch@idosch.org
State New
Headers show
Series mlxsw: Add support for 802.1ad bridging | expand

Commit Message

Ido Schimmel Nov. 29, 2020, 12:54 p.m. UTC 
From: Amit Cohen <amcohen@nvidia.com>

et_vlan field is used to configure which EtherType is used when VLAN is
pushed at ingress (for untagged packets or for QinQ push mode).

It will be used to configure tagging with ether_type1 (i.e., 0x88A8) for
QinQ mode.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 5248532c3999..bea919b92f76 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -834,6 +834,17 @@  MLXSW_ITEM32(reg, spvid, local_port, 0x00, 16, 8);
  */
 MLXSW_ITEM32(reg, spvid, sub_port, 0x00, 8, 8);
 
+/* reg_spvid_et_vlan
+ * EtherType used for when VLAN is pushed at ingress (for untagged
+ * packets or for QinQ push mode).
+ * 0: ether_type0 - (default)
+ * 1: ether_type1
+ * 2: ether_type2 - Reserved when Spectrum-1, supported by Spectrum-2
+ * Ethertype IDs are configured by SVER.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, spvid, et_vlan, 0x04, 16, 2);
+
 /* reg_spvid_pvid
  * Port default VID
  * Access: RW