| Message ID | 1607067224-15616-3-git-send-email-victor.liu@nxp.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | phy: phy-fsl-imx8-mipi-dphy: Add i.MX8qxp LVDS PHY mode support | expand |
Hi Laurent, On Tue, 2020-12-08 at 14:38 +0200, Laurent Pinchart wrote: > Hi Liu, > > Thank you for the patch. > > On Fri, Dec 04, 2020 at 03:33:42PM +0800, Liu Ying wrote: > > This patch allows LVDS PHYs to be configured through > > the generic functions and through a custom structure > > added to the generic union. > > > > The parameters added here are based on common LVDS PHY > > implementation practices. The set of parameters > > should cover all potential users. > > > > Cc: Kishon Vijay Abraham I <kishon@ti.com> > > Cc: Vinod Koul <vkoul@kernel.org> > > Cc: NXP Linux Team <linux-imx@nxp.com> > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > > --- > > include/linux/phy/phy-lvds.h | 48 ++++++++++++++++++++++++++++++++++++++++++++ > > include/linux/phy/phy.h | 4 ++++ > > 2 files changed, 52 insertions(+) > > create mode 100644 include/linux/phy/phy-lvds.h > > > > diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h > > new file mode 100644 > > index 00000000..1b5b9d6 > > --- /dev/null > > +++ b/include/linux/phy/phy-lvds.h > > @@ -0,0 +1,48 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * Copyright 2020 NXP > > + */ > > + > > +#ifndef __PHY_LVDS_H_ > > +#define __PHY_LVDS_H_ > > + > > +/** > > + * struct phy_configure_opts_lvds - LVDS configuration set > > + * > > + * This structure is used to represent the configuration state of a > > + * LVDS phy. > > + */ > > +struct phy_configure_opts_lvds { > > + /** > > + * @bits_per_lane_and_dclk_cycle: > > + * > > + * Number of bits per data lane and differential clock cycle. > > + */ > > + unsigned int bits_per_lane_and_dclk_cycle; > > I see in patch 4/4 that you only support 7, can the value be any > different ? Patch 4/4 is for the Mixel combo PHY embedded in i.MX8qxp SoC. This PHY can only do 7. i.MX8qm SoC embeds another type of Mixel LVDS PHY which can do either 7 or 10(configurable with a register bit called 'NB'). A PHY driver for it is yet to be upstreamed. Regards, Liu Ying > > > + > > + /** > > + * @differential_clk_rate: > > + * > > + * Clock rate, in Hertz, of the LVDS differential clock. > > + */ > > + unsigned long differential_clk_rate; > > + > > + /** > > + * @lanes: > > + * > > + * Number of active, consecutive, data lanes, starting from > > + * lane 0, used for the transmissions. > > + */ > > + unsigned int lanes; > > + > > + /** > > + * @is_slave: > > + * > > + * Boolean, true if the phy is a slave which works together > > + * with a master phy to support dual link transmission, > > + * otherwise a regular phy or a master phy. > > + */ > > + bool is_slave; > > +}; > > + > > +#endif /* __PHY_LVDS_H_ */ > > diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h > > index e435bdb..d450b44 100644 > > --- a/include/linux/phy/phy.h > > +++ b/include/linux/phy/phy.h > > @@ -17,6 +17,7 @@ > > #include <linux/regulator/consumer.h> > > > > #include <linux/phy/phy-dp.h> > > +#include <linux/phy/phy-lvds.h> > > #include <linux/phy/phy-mipi-dphy.h> > > > > struct phy; > > @@ -51,10 +52,13 @@ enum phy_mode { > > * the MIPI_DPHY phy mode. > > * @dp: Configuration set applicable for phys supporting > > * the DisplayPort protocol. > > + * @lvds: Configuration set applicable for phys supporting > > + * the LVDS phy mode. > > */ > > union phy_configure_opts { > > struct phy_configure_opts_mipi_dphy mipi_dphy; > > struct phy_configure_opts_dp dp; > > + struct phy_configure_opts_lvds lvds; > > }; > > > > /**
diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h new file mode 100644 index 00000000..1b5b9d6 --- /dev/null +++ b/include/linux/phy/phy-lvds.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2020 NXP + */ + +#ifndef __PHY_LVDS_H_ +#define __PHY_LVDS_H_ + +/** + * struct phy_configure_opts_lvds - LVDS configuration set + * + * This structure is used to represent the configuration state of a + * LVDS phy. + */ +struct phy_configure_opts_lvds { + /** + * @bits_per_lane_and_dclk_cycle: + * + * Number of bits per data lane and differential clock cycle. + */ + unsigned int bits_per_lane_and_dclk_cycle; + + /** + * @differential_clk_rate: + * + * Clock rate, in Hertz, of the LVDS differential clock. + */ + unsigned long differential_clk_rate; + + /** + * @lanes: + * + * Number of active, consecutive, data lanes, starting from + * lane 0, used for the transmissions. + */ + unsigned int lanes; + + /** + * @is_slave: + * + * Boolean, true if the phy is a slave which works together + * with a master phy to support dual link transmission, + * otherwise a regular phy or a master phy. + */ + bool is_slave; +}; + +#endif /* __PHY_LVDS_H_ */ diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index e435bdb..d450b44 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -17,6 +17,7 @@ #include <linux/regulator/consumer.h> #include <linux/phy/phy-dp.h> +#include <linux/phy/phy-lvds.h> #include <linux/phy/phy-mipi-dphy.h> struct phy; @@ -51,10 +52,13 @@ enum phy_mode { * the MIPI_DPHY phy mode. * @dp: Configuration set applicable for phys supporting * the DisplayPort protocol. + * @lvds: Configuration set applicable for phys supporting + * the LVDS phy mode. */ union phy_configure_opts { struct phy_configure_opts_mipi_dphy mipi_dphy; struct phy_configure_opts_dp dp; + struct phy_configure_opts_lvds lvds; }; /**
This patch allows LVDS PHYs to be configured through the generic functions and through a custom structure added to the generic union. The parameters added here are based on common LVDS PHY implementation practices. The set of parameters should cover all potential users. Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> --- include/linux/phy/phy-lvds.h | 48 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/phy/phy.h | 4 ++++ 2 files changed, 52 insertions(+) create mode 100644 include/linux/phy/phy-lvds.h