diff mbox series

[30/35] wd33c93: use SCSI status

Message ID 20201207124819.95822-31-hare@suse.de
State New
Headers show
Series SCSI result handling cleanup, part 1 | expand

Commit Message

Hannes Reinecke Dec. 7, 2020, 12:48 p.m. UTC
Use standard SCSI status and drop usage of the linux-specific ones.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 drivers/scsi/wd33c93.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index 87dafbc942d3..a23277bb870e 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -1176,7 +1176,7 @@  wd33c93_intr(struct Scsi_Host *instance)
 			if (cmd->SCp.Status == ILLEGAL_STATUS_BYTE)
 				cmd->SCp.Status = lun;
 			if (cmd->cmnd[0] == REQUEST_SENSE
-			    && cmd->SCp.Status != GOOD)
+			    && cmd->SCp.Status != SAM_STAT_GOOD)
 				cmd->result =
 				    (cmd->
 				     result & 0x00ffff) | (DID_ERROR << 16);
@@ -1262,7 +1262,7 @@  wd33c93_intr(struct Scsi_Host *instance)
 		    hostdata->connected = NULL;
 		hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xff));
 		hostdata->state = S_UNCONNECTED;
-		if (cmd->cmnd[0] == REQUEST_SENSE && cmd->SCp.Status != GOOD)
+		if (cmd->cmnd[0] == REQUEST_SENSE && cmd->SCp.Status != SAM_STAT_GOOD)
 			cmd->result =
 			    (cmd->result & 0x00ffff) | (DID_ERROR << 16);
 		else
@@ -1296,7 +1296,7 @@  wd33c93_intr(struct Scsi_Host *instance)
 			hostdata->state = S_UNCONNECTED;
 			DB(DB_INTR, printk(":%d", cmd->SCp.Status))
 			    if (cmd->cmnd[0] == REQUEST_SENSE
-				&& cmd->SCp.Status != GOOD)
+				&& cmd->SCp.Status != SAM_STAT_GOOD)
 				cmd->result =
 				    (cmd->
 				     result & 0x00ffff) | (DID_ERROR << 16);