| Message ID | 20201209220903.27058-1-lukma@denx.de |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2 | expand |
Hi Shawn, > From: Mans Rullgard <mans@mansr.com> > > Add pinmux setting for USB1 overcurrent on pwm2 pad. > Gentle ping on this patch. > Signed-off-by: Mans Rullgard <mans@mansr.com> > Signed-off-by: Lukasz Majewski <lukma@denx.de> > --- > Changes for v2: > - Add S-o-B > --- > arch/arm/boot/dts/imx28.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/boot/dts/imx28.dtsi > b/arch/arm/boot/dts/imx28.dtsi index bbe52150b165..84d0176d5193 100644 > --- a/arch/arm/boot/dts/imx28.dtsi > +++ b/arch/arm/boot/dts/imx28.dtsi > @@ -948,6 +948,16 @@ > fsl,pull-up = > <MXS_PULL_DISABLE>; }; > > + usb1_pins_b: usb1@1 { > + reg = <1>; > + fsl,pinmux-ids = < > + > MX28_PAD_PWM2__USB1_OVERCURRENT > + >; > + fsl,drive-strength = > <MXS_DRIVE_12mA>; > + fsl,voltage = > <MXS_VOLTAGE_HIGH>; > + fsl,pull-up = > <MXS_PULL_DISABLE>; > + }; > + > usb0_id_pins_a: usb0id@0 { > reg = <0>; > fsl,pinmux-ids = < Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
On Wed, Dec 9, 2020 at 7:10 PM Lukasz Majewski <lukma@denx.de> wrote: > > From: Mans Rullgard <mans@mansr.com> > > Add pinmux setting for USB1 overcurrent on pwm2 pad. > > Signed-off-by: Mans Rullgard <mans@mansr.com> > Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
On Wed, Dec 09, 2020 at 11:09:03PM +0100, Lukasz Majewski wrote: > From: Mans Rullgard <mans@mansr.com> > > Add pinmux setting for USB1 overcurrent on pwm2 pad. > > Signed-off-by: Mans Rullgard <mans@mansr.com> > Signed-off-by: Lukasz Majewski <lukma@denx.de> Applied, thanks.
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index bbe52150b165..84d0176d5193 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -948,6 +948,16 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + usb1_pins_b: usb1@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_PWM2__USB1_OVERCURRENT + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + usb0_id_pins_a: usb0id@0 { reg = <0>; fsl,pinmux-ids = <