diff mbox series

[v4,3/3] ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add poweroff node

Message ID 20201209210221.385188-4-michael@fossekall.de
State Superseded
Headers show
Series BPi M2 Zero poweroff support via new regulator-poweroff driver | expand

Commit Message

Michael Klein Dec. 9, 2020, 9:02 p.m. UTC 
Add add devicetree information for the regulator-poweroff driver.

Signed-off-by: Michael Klein <michael@fossekall.de>
---
This patch depends on the regulator names added in

 arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index b43028f9e6df..e7370a049ce2 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -86,6 +86,11 @@  reg_vcc1v2: vcc1v2 {
 		vin-supply = <&reg_vcc5v0>;
 	};
 
+	poweroff {
+		compatible = "regulator-poweroff";
+		power-supply = <&reg_vcc1v2>;
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */