diff mbox series

[3/4] arm64: dts: imx8mq-librem5-devkit: Mark more regulators as always-on

Message ID 7adc87ee6a5aea7b7d635ce1a0fbc4e2d8def7ed.1607879709.git.agx@sigxcpu.org
State New
Headers show
Series Config and device tree updates for the Librem5 Devkit | expand

Commit Message

Guido Günther Dec. 13, 2020, 5:17 p.m. UTC
They power vital parts of the board and low power consumption is not
really an issue here. It also brings things more in line with what
Purism is using downstream.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
 .../dts/freescale/imx8mq-librem5-devkit.dts   | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

Comments

Krzysztof Kozlowski Dec. 15, 2020, 9:21 a.m. UTC | #1
On Sun, Dec 13, 2020 at 06:17:13PM +0100, Guido Günther wrote:
> They power vital parts of the board and low power consumption is not

> really an issue here. It also brings things more in line with what

> Purism is using downstream.


I don't find it a proper explanation.  Not all regulators power vital
parts of board.  Having regulators always on makes people to skip adding
proper supplies thus not describing the HW properly.

Aligning with downstream without clear reason (just because) is also not
a good reason.

Please reduce the choice only to core regulators or describe it really
why they have to be always on.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 12f5d75a5e44..5fdea6b74ed5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -297,7 +297,7 @@  buck1_reg: BUCK1 {
 				regulator-name = "buck1";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
+				regulator-always-on;
 				regulator-ramp-delay = <1250>;
 				rohm,dvs-run-voltage = <900000>;
 				rohm,dvs-idle-voltage = <850000>;
@@ -308,7 +308,7 @@  buck2_reg: BUCK2 {
 				regulator-name = "buck2";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
+				regulator-always-on;
 				regulator-ramp-delay = <1250>;
 				rohm,dvs-run-voltage = <1000000>;
 				rohm,dvs-idle-voltage = <900000>;
@@ -318,7 +318,7 @@  buck3_reg: BUCK3 {
 				regulator-name = "buck3";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1300000>;
-				regulator-boot-on;
+				regulator-always-on;
 				rohm,dvs-run-voltage = <900000>;
 			};
 
@@ -333,7 +333,7 @@  buck5_reg: BUCK5 {
 				regulator-name = "buck5";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
+				regulator-always-on;
 			};
 
 			buck6_reg: BUCK6 {
@@ -354,7 +354,7 @@  buck8_reg: BUCK8 {
 				regulator-name = "buck8";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1400000>;
-				regulator-boot-on;
+				regulator-always-on;
 			};
 
 			ldo1_reg: LDO1 {
@@ -379,34 +379,35 @@  ldo3_reg: LDO3 {
 				regulator-name = "ldo3";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
+				regulator-always-on;
 			};
 
 			ldo4_reg: LDO4 {
 				regulator-name = "ldo4";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
+				regulator-always-on;
 			};
 
 			ldo5_reg: LDO5 {
 				regulator-name = "ldo5";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
 			};
 
 			ldo6_reg: LDO6 {
 				regulator-name = "ldo6";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
+				regulator-always-on;
 			};
 
 			ldo7_reg: LDO7 {
 				regulator-name = "ldo7";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
+				regulator-always-on;
 			};
 		};
 	};