diff mbox

[v2,1/2] spi: davinci: add support to configure gpio cs through dt

Message ID 1406911233-18999-2-git-send-email-grygorii.strashko@ti.com
State Accepted
Commit a88e34ea213e1bdbd9b2dfca1e1e5fa68b9649a0
Headers show

Commit Message

Grygorii Strashko Aug. 1, 2014, 4:40 p.m. UTC
From: Murali Karicheri <m-karicheri2@ti.com>

Currently driver supports only configuration of GPIO CS through
platform data. This patch enhances the driver to configure GPIO
CS through DT. Also update the DT binding documentation to
reflect the availability of cs-gpios.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 .../devicetree/bindings/spi/spi-davinci.txt        |    9 ++-
 drivers/spi/spi-davinci.c                          |   64 +++++++++++++++++---
 2 files changed, 64 insertions(+), 9 deletions(-)

Comments

Mark Brown Aug. 1, 2014, 5:26 p.m. UTC | #1
On Fri, Aug 01, 2014 at 07:40:32PM +0300, Grygorii Strashko wrote:
> From: Murali Karicheri <m-karicheri2@ti.com>
> 
> Currently driver supports only configuration of GPIO CS through
> platform data. This patch enhances the driver to configure GPIO
> CS through DT. Also update the DT binding documentation to
> reflect the availability of cs-gpios.

Please submit an incremental patch with whatever the changes were from
the version of this that I applied already.
Mark Brown Aug. 1, 2014, 5:35 p.m. UTC | #2
On Fri, Aug 01, 2014 at 07:40:32PM +0300, Grygorii Strashko wrote:
> From: Murali Karicheri <m-karicheri2@ti.com>
> 
> Currently driver supports only configuration of GPIO CS through
> platform data. This patch enhances the driver to configure GPIO
> CS through DT. Also update the DT binding documentation to
> reflect the availability of cs-gpios.

Ah, sorry - this is the unapplied patch from before.  It would have been
much better to submit this as the second patch after your rework patch
since this...

> -	if (pdata->chip_sel && chip_sel < pdata->num_chipselect &&
> -				pdata->chip_sel[chip_sel] != SPI_INTERN_CS)
> +	if (np && master->cs_gpios != NULL && spi->cs_gpio >= 0) {
> +		/* SPI core parse and update master->cs_gpio */
>  		gpio_chipsel = true;
> +		gpio = spi->cs_gpio;
> +	} else if (pdata->chip_sel &&
> +		   chip_sel < pdata->num_chipselect &&
> +		   pdata->chip_sel[chip_sel] != SPI_INTERN_CS) {
> +		/* platform data defines chip_sel */
> +		gpio_chipsel = true;
> +		gpio = pdata->chip_sel[chip_sel];
> +	}

...still looks excessively confusing - it is way more logic than I'd
expect to see on every chip select.
Grygorii Strashko Aug. 1, 2014, 6:20 p.m. UTC | #3
On 08/01/2014 08:26 PM, Mark Brown wrote:
> On Fri, Aug 01, 2014 at 07:40:32PM +0300, Grygorii Strashko wrote:
>> From: Murali Karicheri <m-karicheri2@ti.com>
>>
>> Currently driver supports only configuration of GPIO CS through
>> platform data. This patch enhances the driver to configure GPIO
>> CS through DT. Also update the DT binding documentation to
>> reflect the availability of cs-gpios.
>
> Please submit an incremental patch with whatever the changes were from
> the version of this that I applied already.
>

This series is based on top of:
"[PATCH 1/2] spi: davinci: fix to support more than 2 chip selects"
http://www.spinics.net/lists/linux-spi/msg01447.html

Sorry, I've forgot to mention this in cover letter.
Is that what you mean?

regards,
-grygorii

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Mark Brown Aug. 1, 2014, 6:21 p.m. UTC | #4
On Fri, Aug 01, 2014 at 07:40:32PM +0300, Grygorii Strashko wrote:
> From: Murali Karicheri <m-karicheri2@ti.com>
> 
> Currently driver supports only configuration of GPIO CS through
> platform data. This patch enhances the driver to configure GPIO
> CS through DT. Also update the DT binding documentation to
> reflect the availability of cs-gpios.

Applied both, thanks.
Grygorii Strashko Aug. 1, 2014, 6:24 p.m. UTC | #5
On 08/01/2014 08:35 PM, Mark Brown wrote:
> On Fri, Aug 01, 2014 at 07:40:32PM +0300, Grygorii Strashko wrote:
>> From: Murali Karicheri <m-karicheri2@ti.com>
>>
>> Currently driver supports only configuration of GPIO CS through
>> platform data. This patch enhances the driver to configure GPIO
>> CS through DT. Also update the DT binding documentation to
>> reflect the availability of cs-gpios.
> 
> Ah, sorry - this is the unapplied patch from before.  It would have been
> much better to submit this as the second patch after your rework patch
> since this...
> 

I can do this, but It will wait for a week :(

>> -	if (pdata->chip_sel && chip_sel < pdata->num_chipselect &&
>> -				pdata->chip_sel[chip_sel] != SPI_INTERN_CS)
>> +	if (np && master->cs_gpios != NULL && spi->cs_gpio >= 0) {
>> +		/* SPI core parse and update master->cs_gpio */
>>   		gpio_chipsel = true;
>> +		gpio = spi->cs_gpio;
>> +	} else if (pdata->chip_sel &&
>> +		   chip_sel < pdata->num_chipselect &&
>> +		   pdata->chip_sel[chip_sel] != SPI_INTERN_CS) {
>> +		/* platform data defines chip_sel */
>> +		gpio_chipsel = true;
>> +		gpio = pdata->chip_sel[chip_sel];
>> +	}
> 
> ...still looks excessively confusing - it is way more logic than I'd
> expect to see on every chip select.
> 

Yep. Finally, patch "[PATCH v2 2/2] spi: davinci: use spi_device.cs_gpio to store gpio cs per spi device"
simplifies logic above.

Regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 6d0ac8d..f80887b 100644
--- a/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -8,7 +8,8 @@  Required properties:
 	- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
 	- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
 - reg: Offset and length of SPI controller register space
-- num-cs: Number of chip selects
+- num-cs: Number of chip selects. This includes internal as well as
+	GPIO chip selects.
 - ti,davinci-spi-intr-line: interrupt line used to connect the SPI
 	IP to the interrupt controller within the SoC. Possible values
 	are 0 and 1. Manual says one of the two possible interrupt
@@ -17,6 +18,12 @@  Required properties:
 - interrupts: interrupt number mapped to CPU.
 - clocks: spi clk phandle
 
+Optional:
+- cs-gpios: gpio chip selects
+	For example to have 3 internal CS and 2 GPIO CS, user could define
+	cs-gpios = <0>, <0>, <0>, <&gpio1 30 0>, <&gpio1 31 0>;
+	where first three are internal CS and last two are GPIO CS.
+
 Example of a NOR flash slave device (n25q032) connected to DaVinci
 SPI controller device over the SPI bus.
 
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 2477af4..ac4414e0 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -30,6 +30,7 @@ 
 #include <linux/edma.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 #include <linux/slab.h>
@@ -207,17 +208,28 @@  static inline void clear_io_bits(void __iomem *addr, u32 bits)
 static void davinci_spi_chipselect(struct spi_device *spi, int value)
 {
 	struct davinci_spi *dspi;
+	struct device_node *np = spi->dev.of_node;
 	struct davinci_spi_platform_data *pdata;
+	struct spi_master *master = spi->master;
 	u8 chip_sel = spi->chip_select;
 	u16 spidat1 = CS_DEFAULT;
 	bool gpio_chipsel = false;
+	int gpio;
 
 	dspi = spi_master_get_devdata(spi->master);
 	pdata = &dspi->pdata;
 
-	if (pdata->chip_sel && chip_sel < pdata->num_chipselect &&
-				pdata->chip_sel[chip_sel] != SPI_INTERN_CS)
+	if (np && master->cs_gpios != NULL && spi->cs_gpio >= 0) {
+		/* SPI core parse and update master->cs_gpio */
 		gpio_chipsel = true;
+		gpio = spi->cs_gpio;
+	} else if (pdata->chip_sel &&
+		   chip_sel < pdata->num_chipselect &&
+		   pdata->chip_sel[chip_sel] != SPI_INTERN_CS) {
+		/* platform data defines chip_sel */
+		gpio_chipsel = true;
+		gpio = pdata->chip_sel[chip_sel];
+	}
 
 	/*
 	 * Board specific chip select logic decides the polarity and cs
@@ -225,9 +237,9 @@  static void davinci_spi_chipselect(struct spi_device *spi, int value)
 	 */
 	if (gpio_chipsel) {
 		if (value == BITBANG_CS_ACTIVE)
-			gpio_set_value(pdata->chip_sel[chip_sel], 0);
+			gpio_set_value(gpio, 0);
 		else
-			gpio_set_value(pdata->chip_sel[chip_sel], 1);
+			gpio_set_value(gpio, 1);
 	} else {
 		if (value == BITBANG_CS_ACTIVE) {
 			spidat1 |= SPIDAT1_CSHOLD_MASK;
@@ -390,17 +402,41 @@  static int davinci_spi_setup(struct spi_device *spi)
 	int retval = 0;
 	struct davinci_spi *dspi;
 	struct davinci_spi_platform_data *pdata;
+	struct spi_master *master = spi->master;
+	struct device_node *np = spi->dev.of_node;
+	bool internal_cs = true;
 
 	dspi = spi_master_get_devdata(spi->master);
 	pdata = &dspi->pdata;
 
 	if (!(spi->mode & SPI_NO_CS)) {
-		if ((pdata->chip_sel == NULL) ||
-		    (pdata->chip_sel[spi->chip_select] == SPI_INTERN_CS))
-			set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
-
+		if (np && (master->cs_gpios != NULL) && (spi->cs_gpio >= 0)) {
+			unsigned long flags;
+
+			flags = GPIOF_DIR_OUT;
+			if (spi->mode & SPI_CS_HIGH)
+				flags |= GPIOF_INIT_LOW;
+			else
+				flags |= GPIOF_INIT_HIGH;
+			retval = gpio_request_one(spi->cs_gpio,
+						  flags, dev_name(&spi->dev));
+			if (retval) {
+				dev_err(&spi->dev,
+					"GPIO %d request failed (%d)\n",
+					spi->cs_gpio, retval);
+				return retval;
+			}
+			internal_cs = false;
+		} else if (pdata->chip_sel &&
+			   spi->chip_select < pdata->num_chipselect &&
+			   pdata->chip_sel[spi->chip_select] != SPI_INTERN_CS) {
+			internal_cs = false;
+		}
 	}
 
+	if (internal_cs)
+		set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
+
 	if (spi->mode & SPI_READY)
 		set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK);
 
@@ -412,6 +448,15 @@  static int davinci_spi_setup(struct spi_device *spi)
 	return retval;
 }
 
+static void davinci_spi_cleanup(struct spi_device *spi)
+{
+	struct spi_master *master = spi->master;
+	struct device_node *np = spi->dev.of_node;
+
+	if (np && (master->cs_gpios != NULL) && (spi->cs_gpio >= 0))
+		gpio_free(spi->cs_gpio);
+}
+
 static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
 {
 	struct device *sdev = dspi->bitbang.master->dev.parent;
@@ -810,6 +855,8 @@  static int spi_davinci_get_pdata(struct platform_device *pdev,
 
 	/*
 	 * default num_cs is 1 and all chipsel are internal to the chip
+	 * indicated by chip_sel being NULL or cs_gpios being NULL or
+	 * set to -ENOENT. num-cs includes internal as well as gpios.
 	 * indicated by chip_sel being NULL. GPIO based CS is not
 	 * supported yet in DT bindings.
 	 */
@@ -921,6 +968,7 @@  static int davinci_spi_probe(struct platform_device *pdev)
 	master->num_chipselect = pdata->num_chipselect;
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
 	master->setup = davinci_spi_setup;
+	master->cleanup = davinci_spi_cleanup;
 
 	dspi->bitbang.chipselect = davinci_spi_chipselect;
 	dspi->bitbang.setup_transfer = davinci_spi_setup_transfer;