diff mbox series

[5.10,234/717] arm64: dts: ls1028a: fix ENETC PTP clock input

Message ID 20201228125032.199162790@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH Dec. 28, 2020, 12:43 p.m. UTC
From: Michael Walle <michael@walle.cc>

[ Upstream commit d0570a575aa83116bd0f6a99c4de548af773d950 ]

On the LS1028A the ENETC reference clock is connected to 4th HWA output,
see Figure 7 "Clock subsystem block diagram".

The PHC may run with a wrong frequency. ptp_qoriq_auto_config() will read
the clock speed of the clock given in the device tree. It is likely that,
on the reference board this wasn't noticed because both clocks have the
same frequency. But this must not be always the case. Fix it.

Fixes: 49401003e260 ("arm64: dts: fsl: ls1028a: add ENETC 1588 timer node")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 7a6fb7e1fb82f..060b0d5c2669e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -934,7 +934,7 @@ 
 			ethernet@0,4 {
 				compatible = "fsl,enetc-ptp";
 				reg = <0x000400 0 0 0 0>;
-				clocks = <&clockgen 4 0>;
+				clocks = <&clockgen 2 3>;
 				little-endian;
 				fsl,extts-fifo;
 			};