diff mbox series

[v5,4/6] mfd: ahc1ec0: Add support for Advantech embedded controller

Message ID 20201231123948.10473-4-campion.kang@advantech.com.tw
State Superseded
Headers show
Series [v5,1/6] MAINTAINERS: Add Advantech AHC1 embedded controller entry | expand

Commit Message

Campion Kang Dec. 31, 2020, 12:39 p.m. UTC
AHC1EC0 is the embedded controller driver for Advantech industrial
products. This provides sub-devices such as hwmon and watchdog, and also
expose functions for sub-devices to read/write the value to embedded
controller.

Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
---
 drivers/mfd/Kconfig         |  10 +
 drivers/mfd/Makefile        |   2 +
 drivers/mfd/ahc1ec0.c       | 824 ++++++++++++++++++++++++++++++++++++
 include/linux/mfd/ahc1ec0.h | 285 +++++++++++++
 4 files changed, 1121 insertions(+)
 create mode 100644 drivers/mfd/ahc1ec0.c
 create mode 100644 include/linux/mfd/ahc1ec0.h
diff mbox series

Patch

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index bdfce7b15621..4d241c8fba0c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2154,5 +2154,15 @@  config MFD_INTEL_M10_BMC
 	  additional drivers must be enabled in order to use the functionality
 	  of the device.
 
+config MFD_AHC1EC0
+	tristate "Advantech Embedded Controller Module"
+	depends on X86
+	select MFD_CORE
+	help
+	  This is the core function that for Advantech EC drivers. It
+	  includes the sub-devices such as hwmon, watchdog, etc. And also
+	  provides expose functions for sub-devices to read/write the value
+	  to embedded controller.
+
 endmenu
 endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 14fdb188af02..a6af9d8825f4 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -268,3 +268,5 @@  obj-$(CONFIG_MFD_KHADAS_MCU) 	+= khadas-mcu.o
 obj-$(CONFIG_SGI_MFD_IOC3)	+= ioc3.o
 obj-$(CONFIG_MFD_SIMPLE_MFD_I2C)	+= simple-mfd-i2c.o
 obj-$(CONFIG_MFD_INTEL_M10_BMC)   += intel-m10-bmc.o
+
+obj-$(CONFIG_MFD_AHC1EC0)	+= ahc1ec0.o
diff --git a/drivers/mfd/ahc1ec0.c b/drivers/mfd/ahc1ec0.c
new file mode 100644
index 000000000000..12d5743e8c69
--- /dev/null
+++ b/drivers/mfd/ahc1ec0.c
@@ -0,0 +1,824 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Advantech embedded controller core driver AHC1EC0
+ *
+ * Copyright 2020 Advantech IIoT Group
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/kconfig.h>
+#include <linux/mfd/ahc1ec0.h>
+#include <linux/mfd/core.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+
+#define DRV_NAME      "ahc1ec0"
+
+enum {
+	ADVEC_SUBDEV_BRIGHTNESS = 0,
+	ADVEC_SUBDEV_EEPROM,
+	ADVEC_SUBDEV_GPIO,
+	ADVEC_SUBDEV_HWMON,
+	ADVEC_SUBDEV_LED,
+	ADVEC_SUBDEV_WDT,
+	ADVEC_SUBDEV_MAX,
+};
+
+/* Wait IBF (Input Buffer Full) clear */
+static int ec_wait_write(void)
+{
+	int i;
+
+	for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
+		if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_IBF) == 0)
+			return 0;
+
+		udelay(EC_RETRY_UDELAY);
+	}
+
+	return -ETIMEDOUT;
+}
+
+/* Wait OBF (Output Buffer Full) data ready */
+static int ec_wait_read(void)
+{
+	int i;
+
+	for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
+		if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_OBF) != 0)
+			return 0;
+
+		udelay(EC_RETRY_UDELAY);
+	}
+
+	return -ETIMEDOUT;
+}
+
+/* Read data from EC HW RAM, the process is the following:
+ * Step 0. Wait IBF clear to send command
+ * Step 1. Send read command to EC command port
+ * Step 2. Wait IBF clear that means command is got by EC
+ * Step 3. Send read address to EC data port
+ * Step 4. Wait OBF data ready
+ * Step 5. Get data from EC data port
+ */
+int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr, unsigned char *data)
+{
+	int ret;
+
+	mutex_lock(&adv_ec_data->lock);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_HW_RAM_READ, EC_COMMAND_PORT);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(addr, EC_STATUS_PORT);
+
+	ret = ec_wait_read();
+	if (ret)
+		goto error;
+	*data = inb(EC_STATUS_PORT);
+
+	mutex_unlock(&adv_ec_data->lock);
+
+	return ret;
+
+error:
+	mutex_unlock(&adv_ec_data->lock);
+	dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+	       __LINE__);
+
+	return ret;
+}
+
+/* Write data to EC HW RAM
+ * Step 0. Wait IBF clear to send command
+ * Step 1. Send write command to EC command port
+ * Step 2. Wait IBF clear that means command is got by EC
+ * Step 3. Send write address to EC data port
+ * Step 4. Wait IBF clear that means command is got by EC
+ * Step 5. Send data to EC data port
+ */
+int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr, unsigned char data)
+{
+	int ret;
+
+	mutex_lock(&adv_ec_data->lock);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_HW_RAM_WRITE, EC_COMMAND_PORT);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(addr, EC_STATUS_PORT);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(data, EC_STATUS_PORT);
+
+	mutex_unlock(&adv_ec_data->lock);
+
+	return 0;
+
+error:
+	mutex_unlock(&adv_ec_data->lock);
+
+	dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+	       __LINE__);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(write_hw_ram);
+
+/* Get dynamic control table */
+static int adv_get_dynamic_tab(struct adv_ec_platform_data *adv_ec_data)
+{
+	int i, ret;
+	unsigned char pin_tmp, device_id;
+
+	mutex_lock(&adv_ec_data->lock);
+
+	for (i = 0; i < EC_MAX_TBL_NUM; i++) {
+		adv_ec_data->dym_tbl[i].DeviceID = 0xff;
+		adv_ec_data->dym_tbl[i].HWPinNumber = 0xff;
+	}
+
+	for (i = 0; i < EC_MAX_TBL_NUM; i++) {
+		ret = ec_wait_write();
+		if (ret) {
+			dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
+				__LINE__);
+			goto error;
+		}
+		outb(EC_TBL_WRITE_ITEM, EC_COMMAND_PORT);
+
+		ret = ec_wait_write();
+		if (ret) {
+			dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
+				__LINE__);
+			goto error;
+		}
+		outb(i, EC_STATUS_PORT);
+
+		ret = ec_wait_read();
+		if (ret) {
+			dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
+				__LINE__);
+			goto error;
+		}
+
+		/*
+		 *  If item is defined, EC will return item number.
+		 *  If table item is not defined, EC will return 0xFF.
+		 */
+		pin_tmp = inb(EC_STATUS_PORT);
+		if (pin_tmp == 0xff) {
+			dev_dbg(adv_ec_data->dev, "%s: inb(EC_STATUS_PORT)=0x%02x != 0xff.\n",
+				__func__, pin_tmp);
+			goto pass;
+		}
+
+		ret = ec_wait_write();
+		if (ret) {
+			dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
+				__LINE__);
+			goto error;
+		}
+		outb(EC_TBL_GET_PIN, EC_COMMAND_PORT);
+
+		ret = ec_wait_read();
+		if (ret) {
+			dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
+				__LINE__);
+			goto error;
+		}
+		pin_tmp = inb(EC_STATUS_PORT) & 0xff;
+		if (pin_tmp == 0xff) {
+			dev_dbg(adv_ec_data->dev, "%s: pin_tmp(0x%02X). line: %d\n", __func__,
+				pin_tmp, __LINE__);
+			goto pass;
+		}
+
+		ret = ec_wait_write();
+		if (ret)
+			goto error;
+		outb(EC_TBL_GET_DEVID, EC_COMMAND_PORT);
+
+		ret = ec_wait_read();
+		if (ret) {
+			dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
+				__LINE__);
+			goto error;
+		}
+		device_id = inb(EC_STATUS_PORT) & 0xff;
+
+		dev_dbg(adv_ec_data->dev, "%s: device_id=0x%02X. line: %d\n", __func__,
+			device_id, __LINE__);
+
+		adv_ec_data->dym_tbl[i].DeviceID = device_id;
+		adv_ec_data->dym_tbl[i].HWPinNumber = pin_tmp;
+	}
+
+pass:
+	mutex_unlock(&adv_ec_data->lock);
+	return 0;
+
+error:
+	mutex_unlock(&adv_ec_data->lock);
+	dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
+		__func__, __LINE__);
+	return ret;
+}
+
+int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned char hwpin,
+		unsigned char multi)
+{
+	int ret;
+	u32 ret_val;
+	unsigned int LSB, MSB;
+
+	mutex_lock(&adv_ec_data->lock);
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_AD_INDEX_WRITE, EC_COMMAND_PORT);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(hwpin, EC_STATUS_PORT);
+
+	ret = ec_wait_read();
+	if (ret)
+		goto error;
+
+	if (inb(EC_STATUS_PORT) == 0xff) {
+		mutex_unlock(&adv_ec_data->lock);
+		return -1;
+	}
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_AD_LSB_READ, EC_COMMAND_PORT);
+
+	ret = ec_wait_read();
+	if (ret)
+		goto error;
+	LSB = inb(EC_STATUS_PORT);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_AD_MSB_READ, EC_COMMAND_PORT);
+
+	ret = ec_wait_read();
+	if (ret)
+		goto error;
+	MSB = inb(EC_STATUS_PORT);
+	ret_val = ((MSB << 8) | LSB) & 0x03FF;
+	ret_val = ret_val * multi * 100;
+
+	mutex_unlock(&adv_ec_data->lock);
+	return ret_val;
+
+error:
+	mutex_unlock(&adv_ec_data->lock);
+
+	dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+		__LINE__);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(read_ad_value);
+
+int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+		unsigned char *pvalue)
+{
+	int ret;
+	unsigned char value;
+
+	mutex_lock(&adv_ec_data->lock);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_ACPI_RAM_READ, EC_COMMAND_PORT);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(addr, EC_STATUS_PORT);
+
+	ret = ec_wait_read();
+	if (ret)
+		goto error;
+	value = inb(EC_STATUS_PORT);
+	*pvalue = value;
+
+	mutex_unlock(&adv_ec_data->lock);
+
+	return 0;
+
+error:
+	mutex_unlock(&adv_ec_data->lock);
+
+	dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+		__LINE__);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(read_acpi_value);
+
+int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+		unsigned char value)
+{
+	int ret;
+
+	mutex_lock(&adv_ec_data->lock);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_ACPI_DATA_WRITE, EC_COMMAND_PORT);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(addr, EC_STATUS_PORT);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(value, EC_STATUS_PORT);
+
+	mutex_unlock(&adv_ec_data->lock);
+	return 0;
+
+error:
+	mutex_unlock(&adv_ec_data->lock);
+
+	dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+		__LINE__);
+
+	return ret;
+}
+
+int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+		unsigned char *pvalue)
+{
+	int ret;
+
+	unsigned char gpio_status_value;
+
+	mutex_lock(&adv_ec_data->lock);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(PinNumber, EC_STATUS_PORT);
+
+	ret = ec_wait_read();
+	if (ret)
+		goto error;
+
+	if (inb(EC_STATUS_PORT) == 0xff) {
+		dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n", __func__);
+		mutex_unlock(&adv_ec_data->lock);
+		return -1;
+	}
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_GPIO_STATUS_READ, EC_COMMAND_PORT);
+
+	ret = ec_wait_read();
+	if (ret)
+		goto error;
+	gpio_status_value = inb(EC_STATUS_PORT);
+
+	*pvalue = gpio_status_value;
+	mutex_unlock(&adv_ec_data->lock);
+	return 0;
+
+error:
+	mutex_unlock(&adv_ec_data->lock);
+
+	dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+		__LINE__);
+	return ret;
+}
+
+int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+		unsigned char value)
+{
+	int ret;
+
+	mutex_lock(&adv_ec_data->lock);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(PinNumber, EC_STATUS_PORT);
+
+	ret = ec_wait_read();
+	if (ret)
+		goto error;
+
+	if (inb(EC_STATUS_PORT) == 0xff) {
+		mutex_unlock(&adv_ec_data->lock);
+		dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n", __func__);
+		return -1;
+	}
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_GPIO_STATUS_WRITE, EC_COMMAND_PORT);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(value, EC_STATUS_PORT);
+
+	mutex_unlock(&adv_ec_data->lock);
+	return 0;
+
+error:
+	mutex_unlock(&adv_ec_data->lock);
+	dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d", __func__,
+		__LINE__);
+
+	return ret;
+}
+
+int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+		unsigned char *pvalue)
+{
+	int ret;
+	unsigned char gpio_dir_value;
+
+	mutex_lock(&adv_ec_data->lock);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(PinNumber, EC_STATUS_PORT);
+
+	ret = ec_wait_read();
+	if (ret)
+		goto error;
+
+	if (inb(EC_STATUS_PORT) == 0xff) {
+		mutex_unlock(&adv_ec_data->lock);
+		dev_err(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n", __func__,
+			__LINE__);
+		return -1;
+	}
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_GPIO_DIR_READ, EC_COMMAND_PORT);
+
+	ret = ec_wait_read();
+	if (ret)
+		goto error;
+	gpio_dir_value = inb(EC_STATUS_PORT);
+	*pvalue = gpio_dir_value;
+
+	mutex_unlock(&adv_ec_data->lock);
+	return 0;
+
+error:
+	mutex_unlock(&adv_ec_data->lock);
+
+	dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+			__LINE__);
+
+	return ret;
+}
+
+int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+		unsigned char value)
+{
+	int ret;
+
+	mutex_lock(&adv_ec_data->lock);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(PinNumber, EC_STATUS_PORT);
+
+	ret = ec_wait_read();
+	if (ret)
+		goto error;
+
+	if (inb(EC_STATUS_PORT) == 0xff) {
+		mutex_unlock(&adv_ec_data->lock);
+		dev_warn(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n", __func__,
+			__LINE__);
+
+		return -1;
+	}
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(EC_GPIO_DIR_WRITE, EC_COMMAND_PORT);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(value, EC_STATUS_PORT);
+
+	mutex_unlock(&adv_ec_data->lock);
+	return 0;
+
+error:
+	mutex_unlock(&adv_ec_data->lock);
+
+	dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+			__LINE__);
+
+	return ret;
+}
+
+int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data)
+{
+	int ret;
+
+	mutex_lock(&adv_ec_data->lock);
+
+	ret = ec_wait_write();
+	if (ret)
+		goto error;
+	outb(data, EC_COMMAND_PORT);
+
+	mutex_unlock(&adv_ec_data->lock);
+	return 0;
+
+error:
+	mutex_unlock(&adv_ec_data->lock);
+
+	dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+			__LINE__);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(write_hwram_command);
+
+static int adv_ec_get_productname(struct adv_ec_platform_data *adv_ec_data, char *product)
+{
+	const char *vendor, *device;
+	int length = 0;
+
+	/* Check it is Advantech board */
+	vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+	if (memcmp(vendor, "Advantech", sizeof("Advantech")) != 0)
+		return -ENODEV;
+
+	/* Get product model name */
+	device = dmi_get_system_info(DMI_PRODUCT_NAME);
+	if (device) {
+		while ((device[length] != ' ')
+			&& (length < AMI_ADVANTECH_BOARD_ID_LENGTH))
+			length++;
+		memset(product, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
+		memmove(product, device, length);
+
+		dev_info(adv_ec_data->dev, "BIOS Product Name = %s\n", product);
+
+		return 0;
+	}
+
+	dev_warn(adv_ec_data->dev, "This device is not Advantech Board (%s)!\n", product);
+
+	return -ENODEV;
+}
+
+static const struct mfd_cell adv_ec_sub_cells[] = {
+	{ .name = "adv-ec-brightness", },
+	{ .name = "adv-ec-eeprom", },
+	{ .name = "adv-ec-gpio", },
+	{ .name = "ahc1ec0-hwmon", },
+	{ .name = "adv-ec-led", },
+	{ .name = "ahc1ec0-wdt", },
+};
+
+static int adv_ec_init_ec_data(struct adv_ec_platform_data *adv_ec_data)
+{
+	int ret;
+
+	adv_ec_data->sub_dev_mask = 0;
+	adv_ec_data->sub_dev_nb = 0;
+	adv_ec_data->dym_tbl = NULL;
+	adv_ec_data->bios_product_name = NULL;
+
+	mutex_init(&adv_ec_data->lock);
+
+	/* Get product name */
+	adv_ec_data->bios_product_name =
+		devm_kzalloc(adv_ec_data->dev, AMI_ADVANTECH_BOARD_ID_LENGTH, GFP_KERNEL);
+	if (!adv_ec_data->bios_product_name)
+		return -ENOMEM;
+
+	memset(adv_ec_data->bios_product_name, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
+	ret = adv_ec_get_productname(adv_ec_data, adv_ec_data->bios_product_name);
+	if (ret)
+		return ret;
+
+	/* Get pin table */
+	adv_ec_data->dym_tbl = devm_kzalloc(adv_ec_data->dev,
+					EC_MAX_TBL_NUM * sizeof(struct Dynamic_Tab),
+					GFP_KERNEL);
+	if (!adv_ec_data->dym_tbl)
+		return -ENOMEM;
+
+	ret = adv_get_dynamic_tab(adv_ec_data);
+
+	return ret;
+}
+
+static int adv_ec_parse_prop(struct adv_ec_platform_data *adv_ec_data)
+{
+	int i, ret;
+	u32 nb, sub_dev[ADVEC_SUBDEV_MAX];
+
+	ret = device_property_read_u32(adv_ec_data->dev, "advantech,sub-dev-nb", &nb);
+	if (ret < 0) {
+		dev_err(adv_ec_data->dev, "get sub-dev-nb failed! (%d)\n", ret);
+		return ret;
+	}
+	adv_ec_data->sub_dev_nb = nb;
+
+	ret = device_property_read_u32_array(adv_ec_data->dev, "advantech,sub-dev",
+					     sub_dev, nb);
+	if (ret < 0) {
+		dev_err(adv_ec_data->dev, "get sub-dev failed! (%d)\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < nb; i++) {
+		switch (sub_dev[i]) {
+		case ADVEC_SUBDEV_BRIGHTNESS:
+		case ADVEC_SUBDEV_EEPROM:
+		case ADVEC_SUBDEV_GPIO:
+		case ADVEC_SUBDEV_HWMON:
+		case ADVEC_SUBDEV_LED:
+		case ADVEC_SUBDEV_WDT:
+			adv_ec_data->sub_dev_mask |= BIT(sub_dev[i]);
+			break;
+		default:
+			dev_err(adv_ec_data->dev, "invalid prop value(%d)!\n",
+				sub_dev[i]);
+		}
+	}
+	dev_info(adv_ec_data->dev, "sub-dev mask = 0x%x\n", adv_ec_data->sub_dev_mask);
+
+	return 0;
+}
+
+static int adv_ec_probe(struct platform_device *pdev)
+{
+	int ret, i;
+	struct device *dev = &pdev->dev;
+	struct adv_ec_platform_data *adv_ec_data;
+
+	adv_ec_data = devm_kzalloc(dev, sizeof(struct adv_ec_platform_data), GFP_KERNEL);
+	if (!adv_ec_data)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, adv_ec_data);
+	adv_ec_data->dev = dev;
+
+	ret = adv_ec_init_ec_data(adv_ec_data);
+	if (ret)
+		goto err_init_data;
+
+	ret = adv_ec_parse_prop(adv_ec_data);
+	if (ret)
+		goto err_prop;
+
+	/* check whether this EC has the following subdevices. */
+	for (i = 0; i < ARRAY_SIZE(adv_ec_sub_cells); i++) {
+		if (adv_ec_data->sub_dev_mask & BIT(i)) {
+			ret = mfd_add_hotplug_devices(dev, &adv_ec_sub_cells[i], 1);
+			dev_info(adv_ec_data->dev, "mfd_add_hotplug_devices[%d] %s\n", i,
+				adv_ec_sub_cells[i].name);
+			if (ret)
+				dev_err(dev, "failed to add %s subdevice: %d\n",
+					adv_ec_sub_cells[i].name, ret);
+		}
+	}
+
+	dev_info(adv_ec_data->dev, "Advantech EC probe done");
+
+	return 0;
+
+err_prop:
+	dev_err(dev, "failed to probe\n");
+
+err_init_data:
+	mutex_destroy(&adv_ec_data->lock);
+
+	dev_err(dev, "failed to init data\n");
+
+	return ret;
+}
+
+static int adv_ec_remove(struct platform_device *pdev)
+{
+	struct adv_ec_platform_data *adv_ec_data;
+
+	adv_ec_data = dev_get_drvdata(&pdev->dev);
+
+	mutex_destroy(&adv_ec_data->lock);
+
+	mfd_remove_devices(&pdev->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id adv_ec_of_match[] = {
+	{
+		.compatible = "advantech,ahc1ec0",
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, adv_ec_of_match);
+#endif
+
+static const struct acpi_device_id adv_ec_acpi_match[] = {
+	{
+		"AHC1EC0",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, adv_ec_acpi_match);
+
+static const struct platform_device_id adv_ec_id[] = {
+	{ DRV_NAME, 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, adv_ec_id);
+
+static struct platform_driver adv_ec_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = of_match_ptr(adv_ec_of_match),
+		.acpi_match_table = ACPI_PTR(adv_ec_acpi_match),
+	},
+	.id_table = adv_ec_id,
+	.probe = adv_ec_probe,
+	.remove = adv_ec_remove,
+};
+module_platform_driver(adv_ec_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DESCRIPTION("Advantech Embedded Controller core driver.");
+MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
+MODULE_AUTHOR("Jianfeng Dai <jianfeng.dai@advantech.com.cn>");
+MODULE_VERSION("1.0");
diff --git a/include/linux/mfd/ahc1ec0.h b/include/linux/mfd/ahc1ec0.h
new file mode 100644
index 000000000000..84b44a060596
--- /dev/null
+++ b/include/linux/mfd/ahc1ec0.h
@@ -0,0 +1,285 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __LINUX_MFD_AHC1EC0_H
+#define __LINUX_MFD_AHC1EC0_H
+
+#include <linux/device.h>
+
+#define EC_COMMAND_PORT             0x29A /* EC I/O command port */
+#define EC_STATUS_PORT              0x299 /* EC I/O data port */
+
+#define EC_RETRY_UDELAY              200 /* EC command retry delay in microseconds */
+#define EC_MAX_TIMEOUT_COUNT        5000 /* EC command max retry count */
+#define EC_COMMAND_BIT_OBF          0x01 /* Bit 0 is for OBF ready (Output buffer full) */
+#define EC_COMMAND_BIT_IBF          0x02 /* Bit 1 is for IBF ready (Input buffer full) */
+
+/* Analog to digital converter command */
+#define EC_AD_INDEX_WRITE   0x15 /* Write ADC port number into index */
+#define EC_AD_LSB_READ      0x16 /* Read ADC LSB value from ADC port */
+#define EC_AD_MSB_READ      0x1F /* Read ADC MSB value from ADC port */
+
+/* Voltage device ID */
+#define EC_DID_SMBOEM0      0x28 /* SMBUS/I2C. Smbus channel 0 */
+#define EC_DID_CMOSBAT      0x50 /* CMOS coin battery voltage */
+#define EC_DID_CMOSBAT_X2   0x51 /* CMOS coin battery voltage*2 */
+#define EC_DID_CMOSBAT_X10  0x52 /* CMOS coin battery voltage*10 */
+#define EC_DID_5VS0         0x56 /* 5VS0 voltage */
+#define EC_DID_5VS0_X2      0x57 /* 5VS0 voltage*2 */
+#define EC_DID_5VS0_X10     0x58 /* 5VS0 voltage*10 */
+#define EC_DID_5VS5         0x59 /* 5VS5 voltage */
+#define EC_DID_5VS5_X2      0x5A /* 5VS5 voltage*2 */
+#define EC_DID_5VS5_X10     0x5B /* 5VS5 voltage*10 */
+#define EC_DID_12VS0        0x62 /* 12VS0 voltage */
+#define EC_DID_12VS0_X2     0x63 /* 12VS0 voltage*2 */
+#define EC_DID_12VS0_X10    0x64 /* 12VS0 voltage*10 */
+#define EC_DID_VCOREA       0x65 /* CPU A core voltage */
+#define EC_DID_VCOREA_X2    0x66 /* CPU A core voltage*2 */
+#define EC_DID_VCOREA_X10   0x67 /* CPU A core voltage*10 */
+#define EC_DID_VCOREB       0x68 /* CPU B core voltage */
+#define EC_DID_VCOREB_X2    0x69 /* CPU B core voltage*2 */
+#define EC_DID_VCOREB_X10   0x6A /* CPU B core voltage*10 */
+#define EC_DID_DC           0x6B /* ADC. onboard voltage */
+#define EC_DID_DC_X2        0x6C /* ADC. onboard voltage*2 */
+#define EC_DID_DC_X10       0x6D /* ADC. onboard voltage*10 */
+
+/* Current device ID */
+#define EC_DID_CURRENT              0x74
+
+/* ACPI commands */
+#define EC_ACPI_RAM_READ            0x80
+#define EC_ACPI_RAM_WRITE           0x81
+
+/*
+ *  Dynamic control table commands
+ *  The table includes HW pin number, Device ID, and Pin polarity
+ */
+#define EC_TBL_WRITE_ITEM           0x20
+#define EC_TBL_GET_PIN              0x21
+#define EC_TBL_GET_DEVID            0x22
+#define EC_MAX_TBL_NUM              32
+
+/* LED Device ID table */
+#define EC_DID_LED_RUN              0xE1
+#define EC_DID_LED_ERR              0xE2
+#define EC_DID_LED_SYS_RECOVERY     0xE3
+#define EC_DID_LED_D105_G           0xE4
+#define EC_DID_LED_D106_G           0xE5
+#define EC_DID_LED_D107_G           0xE6
+
+/* LED control HW RAM address 0xA0-0xAF */
+#define EC_HWRAM_LED_BASE_ADDR      0xA0
+#define EC_HWRAM_LED_PIN(N)         (EC_HWRAM_LED_BASE_ADDR + (4 * (N))) // N:0-3
+#define EC_HWRAM_LED_CTRL_HIBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 1)
+#define EC_HWRAM_LED_CTRL_LOBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 2)
+#define EC_HWRAM_LED_DEVICE_ID(N)   (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 3)
+
+/* LED control bit */
+#define LED_CTRL_ENABLE_BIT()           (1 << 4)
+#define LED_CTRL_INTCTL_BIT()           (1 << 5)
+#define LED_CTRL_LEDBIT_MASK            (0x03FF << 6)
+#define LED_CTRL_POLARITY_MASK          (0x000F << 0)
+#define LED_CTRL_INTCTL_EXTERNAL        0
+#define LED_CTRL_INTCTL_INTERNAL        1
+
+#define LED_DISABLE  0x0
+#define LED_ON       0x1
+#define LED_FAST     0x3
+#define LED_NORMAL   0x5
+#define LED_SLOW     0x7
+#define LED_MANUAL   0xF
+
+#define LED_CTRL_LEDBIT_DISABLE	0x0000
+#define LED_CTRL_LEDBIT_ON		0x03FF
+#define LED_CTRL_LEDBIT_FAST	0x02AA
+#define LED_CTRL_LEDBIT_NORMAL	0x0333
+#define LED_CTRL_LEDBIT_SLOW	0x03E0
+
+/* Get the device name */
+#define AMI_ADVANTECH_BOARD_ID_LENGTH	32
+
+/*
+ * Advantech Embedded Controller watchdog commands
+ * EC can send multi-stage watchdog event. System can setup watchdog event
+ * independently to make up event sequence.
+ */
+#define EC_COMMANS_PORT_IBF_MASK	0x02
+#define EC_RESET_EVENT				0x04
+#define	EC_WDT_START				0x28
+#define	EC_WDT_STOP					0x29
+#define	EC_WDT_RESET				0x2A
+#define	EC_WDT_BOOTTMEWDT_STOP		0x2B
+#define EC_HW_RAM					0x89
+
+#define EC_EVENT_FLAG				0x57
+#define EC_ENABLE_DELAY_H			0x58
+#define EC_ENABLE_DELAY_L			0x59
+#define EC_POWER_BTN_TIME_H			0x5A
+#define EC_POWER_BTN_TIME_L			0x5B
+#define EC_RESET_DELAY_TIME_H		0x5E
+#define EC_RESET_DELAY_TIME_L		0x5F
+#define EC_PIN_DELAY_TIME_H			0x60
+#define EC_PIN_DELAY_TIME_L			0x61
+#define EC_SCI_DELAY_TIME_H			0x62
+#define EC_SCI_DELAY_TIME_L			0x63
+
+/* EC ACPI commands */
+#define EC_ACPI_DATA_READ			0x80
+#define EC_ACPI_DATA_WRITE			0x81
+
+/* Brightness ACPI Addr */
+#define BRIGHTNESS_ACPI_ADDR		0x50
+
+/* EC HW RAM commands */
+#define EC_HW_EXTEND_RAM_READ		0x86
+#define EC_HW_EXTEND_RAM_WRITE		0x87
+#define	EC_HW_RAM_READ				0x88
+#define EC_HW_RAM_WRITE				0x89
+
+/* EC Smbus commands */
+#define EC_SMBUS_CHANNEL_SET		0x8A	 /* Set selector number (SMBUS channel) */
+#define EC_SMBUS_ENABLE_I2C			0x8C	 /* Enable channel I2C */
+#define EC_SMBUS_DISABLE_I2C		0x8D	 /* Disable channel I2C */
+
+/* Smbus transmit protocol */
+#define EC_SMBUS_PROTOCOL			0x00
+
+/* SMBUS status */
+#define EC_SMBUS_STATUS				0x01
+
+/* SMBUS device slave address (bit0 must be 0) */
+#define EC_SMBUS_SLV_ADDR			0x02
+
+/* SMBUS device command */
+#define EC_SMBUS_CMD				0x03
+
+/* 0x04-0x24 Data In read process, return data are stored in this address */
+#define EC_SMBUS_DATA				0x04
+
+#define EC_SMBUS_DAT_OFFSET(n)	(EC_SMBUS_DATA + (n))
+
+/* SMBUS channel selector (0-4) */
+#define EC_SMBUS_CHANNEL			0x2B
+
+/* EC SMBUS transmit Protocol code */
+#define SMBUS_QUICK_WRITE			0x02 /* Write Quick Command */
+#define SMBUS_QUICK_READ			0x03 /* Read Quick Command */
+#define SMBUS_BYTE_SEND				0x04 /* Send Byte */
+#define SMBUS_BYTE_RECEIVE			0x05 /* Receive Byte */
+#define SMBUS_BYTE_WRITE			0x06 /* Write Byte */
+#define SMBUS_BYTE_READ				0x07 /* Read Byte */
+#define SMBUS_WORD_WRITE			0x08 /* Write Word */
+#define SMBUS_WORD_READ				0x09 /* Read Word */
+#define SMBUS_BLOCK_WRITE			0x0A /* Write Block */
+#define SMBUS_BLOCK_READ			0x0B /* Read Block */
+#define SMBUS_PROC_CALL				0x0C /* Process Call */
+#define SMBUS_BLOCK_PROC_CALL		0x0D /* Write Block-Read Block Process Call */
+#define SMBUS_I2C_READ_WRITE		0x0E /* I2C block Read-Write */
+#define SMBUS_I2C_WRITE_READ		0x0F /* I2C block Write-Read */
+
+/* GPIO control commands */
+#define EC_GPIO_INDEX_WRITE			0x10
+#define EC_GPIO_STATUS_READ			0x11
+#define EC_GPIO_STATUS_WRITE		0x12
+#define EC_GPIO_DIR_READ			0x1D
+#define EC_GPIO_DIR_WRITE			0x1E
+
+/* One Key Recovery commands */
+#define EC_ONE_KEY_FLAG				0x9C
+
+/* ASG OEM commands */
+#define EC_ASG_OEM					0xEA
+#define EC_ASG_OEM_READ				0x00
+#define EC_ASG_OEM_WRITE			0x01
+#define EC_OEM_POWER_STATUS_VIN1	0X10
+#define EC_OEM_POWER_STATUS_VIN2	0X11
+#define EC_OEM_POWER_STATUS_BAT1	0X12
+#define EC_OEM_POWER_STATUS_BAT2	0X13
+
+/* GPIO DEVICE ID */
+#define EC_DID_ALTGPIO_0			0x10    /* 0x10 AltGpio0 User define gpio */
+#define EC_DID_ALTGPIO_1			0x11    /* 0x11 AltGpio1 User define gpio */
+#define EC_DID_ALTGPIO_2			0x12    /* 0x12 AltGpio2 User define gpio */
+#define EC_DID_ALTGPIO_3			0x13    /* 0x13 AltGpio3 User define gpio */
+#define EC_DID_ALTGPIO_4			0x14    /* 0x14 AltGpio4 User define gpio */
+#define EC_DID_ALTGPIO_5			0x15    /* 0x15 AltGpio5 User define gpio */
+#define EC_DID_ALTGPIO_6			0x16    /* 0x16 AltGpio6 User define gpio */
+#define EC_DID_ALTGPIO_7			0x17    /* 0x17 AltGpio7 User define gpio */
+
+/* Lmsensor Chip Register */
+#define NSLM96163_CHANNEL			0x02
+
+/* NS_LM96163 address 0x98 */
+#define NSLM96163_ADDR				0x98
+
+/* LM96163 index(0x00) Local Temperature (Signed MSB) */
+#define NSLM96163_LOC_TEMP			0x00
+
+/* HWMON registers */
+#define INA266_REG_VOLTAGE          0x02    /* 1.25mV */
+#define INA266_REG_POWER            0x03    /* 25mW */
+#define INA266_REG_CURRENT          0x04    /* 1mA */
+
+struct HW_PIN_TBL {
+	unsigned int vbat[2];
+	unsigned int v5[2];
+	unsigned int v12[2];
+	unsigned int vcore[2];
+	unsigned int vdc[2];
+	unsigned int ec_current[2];
+	unsigned int power[2];
+};
+
+struct Dynamic_Tab {
+	unsigned char DeviceID;
+	unsigned char HWPinNumber;
+};
+
+struct EC_SMBOEM0 {
+	unsigned char HWPinNumber;
+};
+
+struct EC_READ_HW_RAM {
+	unsigned int addr;
+	unsigned int data;
+};
+
+struct EC_WRITE_HW_RAM {
+	unsigned int addr;
+	unsigned int data;
+};
+
+struct pled_hw_pin_tbl {
+	unsigned int pled[6];
+};
+
+struct adv_ec_platform_data {
+	char *bios_product_name;
+	int sub_dev_nb;
+	u32 sub_dev_mask;
+	struct mutex lock;
+	struct device *dev;
+	struct class *adv_ec_class;
+
+	struct Dynamic_Tab *dym_tbl;
+};
+
+int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned char hwpin,
+			unsigned char multi);
+int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+			unsigned char *pvalue);
+int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+			unsigned char value);
+int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+			unsigned char *data);
+int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+			unsigned char data);
+int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data);
+int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+			unsigned char *pvalue);
+int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+			unsigned char value);
+int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+			unsigned char *pvalue);
+int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+			unsigned char value);
+
+#endif /* __LINUX_MFD_AHC1EC0_H */