diff mbox series

[03/10] net: 8390: Drop support for TX49XX boards

Message ID 20210105140305.141401-4-tsbogend@alpha.franken.de
State New
Headers show
Series Remove support for TX49xx | expand

Commit Message

Thomas Bogendoerfer Jan. 5, 2021, 2:02 p.m. UTC
CPU support for TX49xx is getting removed, so remove support in network
drivers for it.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
---
 drivers/net/ethernet/8390/Kconfig | 2 +-
 drivers/net/ethernet/8390/ne.c    | 7 +------
 2 files changed, 2 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index 9f4b302fd2ce..6aecc4c199d0 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -101,7 +101,7 @@  config MCF8390
 
 config NE2000
 	tristate "NE2000/NE1000 support"
-	depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC)
+	depends on (ISA || (Q40 && m) || ATARI_ETHERNEC)
 	select CRC32
 	help
 	  If you have a network (Ethernet) card of this type, say Y here.
diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c
index e9756d0ea5b8..69110306badf 100644
--- a/drivers/net/ethernet/8390/ne.c
+++ b/drivers/net/ethernet/8390/ne.c
@@ -143,9 +143,6 @@  bad_clone_list[] __initdata = {
     {"E-LAN100", "E-LAN200", {0x00, 0x00, 0x5d}}, /* Broken ne1000 clones */
     {"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */
     {"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */
-#ifdef CONFIG_MACH_TX49XX
-    {"RBHMA4X00-RTL8019", "RBHMA4X00-RTL8019", {0x00, 0x60, 0x0a}},  /* Toshiba built-in */
-#endif
     {"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */
     {NULL,}
 };
@@ -164,9 +161,7 @@  bad_clone_list[] __initdata = {
 #define NESM_START_PG	0x40	/* First page of TX buffer */
 #define NESM_STOP_PG	0x80	/* Last page +1 of RX ring */
 
-#if defined(CONFIG_MACH_TX49XX)
-#  define DCR_VAL 0x48		/* 8-bit mode */
-#elif defined(CONFIG_ATARI)	/* 8-bit mode on Atari, normal on Q40 */
+#if defined(CONFIG_ATARI)	/* 8-bit mode on Atari, normal on Q40 */
 #  define DCR_VAL (MACH_IS_ATARI ? 0x48 : 0x49)
 #else
 #  define DCR_VAL 0x49