diff mbox series

[v9,02/10] iommu/arm-smmu-v3: Use device properties for pasid-num-bits

Message ID 20210108145217.2254447-3-jean-philippe@linaro.org
State Superseded
Headers show
Series iommu: I/O page faults for SMMUv3 | expand

Commit Message

Jean-Philippe Brucker Jan. 8, 2021, 2:52 p.m. UTC
The pasid-num-bits property shouldn't need a dedicated fwspec field,
it's a job for device properties. Add properties for IORT, and access
the number of PASID bits using device_property_read_u32().

Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>

---
 include/linux/iommu.h                       |  2 --
 drivers/acpi/arm64/iort.c                   | 13 +++++++------
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c |  3 ++-
 drivers/iommu/of_iommu.c                    |  5 -----
 4 files changed, 9 insertions(+), 14 deletions(-)

-- 
2.29.2

Comments

Jonathan Cameron Jan. 19, 2021, 11:22 a.m. UTC | #1
On Fri, 8 Jan 2021 15:52:10 +0100
Jean-Philippe Brucker <jean-philippe@linaro.org> wrote:

> The pasid-num-bits property shouldn't need a dedicated fwspec field,
> it's a job for device properties. Add properties for IORT, and access
> the number of PASID bits using device_property_read_u32().
> 
> Suggested-by: Robin Murphy <robin.murphy@arm.com>
> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>

Nice

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Looks like we are fine not checking for missing properties because
ssid_bits == 0 corresponds to pasid off anyway.


> ---
>  include/linux/iommu.h                       |  2 --
>  drivers/acpi/arm64/iort.c                   | 13 +++++++------
>  drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c |  3 ++-
>  drivers/iommu/of_iommu.c                    |  5 -----
>  4 files changed, 9 insertions(+), 14 deletions(-)
> 
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 26bcde5e7746..583c734b2e87 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -570,7 +570,6 @@ struct iommu_group *fsl_mc_device_group(struct device *dev);
>   * struct iommu_fwspec - per-device IOMMU instance data
>   * @ops: ops for this device's IOMMU
>   * @iommu_fwnode: firmware handle for this device's IOMMU
> - * @num_pasid_bits: number of PASID bits supported by this device
>   * @num_ids: number of associated device IDs
>   * @ids: IDs which this device may present to the IOMMU
>   */
> @@ -578,7 +577,6 @@ struct iommu_fwspec {
>  	const struct iommu_ops	*ops;
>  	struct fwnode_handle	*iommu_fwnode;
>  	u32			flags;
> -	u32			num_pasid_bits;
>  	unsigned int		num_ids;
>  	u32			ids[];
>  };
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> index d4eac6d7e9fb..c9a8bbb74b09 100644
> --- a/drivers/acpi/arm64/iort.c
> +++ b/drivers/acpi/arm64/iort.c
> @@ -968,15 +968,16 @@ static int iort_pci_iommu_init(struct pci_dev *pdev, u16 alias, void *data)
>  static void iort_named_component_init(struct device *dev,
>  				      struct acpi_iort_node *node)
>  {
> +	struct property_entry props[2] = {};
>  	struct acpi_iort_named_component *nc;
> -	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
> -
> -	if (!fwspec)
> -		return;
>  
>  	nc = (struct acpi_iort_named_component *)node->node_data;
> -	fwspec->num_pasid_bits = FIELD_GET(ACPI_IORT_NC_PASID_BITS,
> -					   nc->node_flags);
> +	props[0] = PROPERTY_ENTRY_U32("pasid-num-bits",
> +				      FIELD_GET(ACPI_IORT_NC_PASID_BITS,
> +						nc->node_flags));
> +
> +	if (device_add_properties(dev, props))
> +		dev_warn(dev, "Could not add device properties\n");
>  }
>  
>  static int iort_nc_iommu_map(struct device *dev, struct acpi_iort_node *node)
> diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> index 8ca7415d785d..6a53b4edf054 100644
> --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> @@ -2366,7 +2366,8 @@ static struct iommu_device *arm_smmu_probe_device(struct device *dev)
>  		}
>  	}
>  
> -	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
> +	device_property_read_u32(dev, "pasid-num-bits", &master->ssid_bits);
> +	master->ssid_bits = min(smmu->ssid_bits, master->ssid_bits);
>  
>  	/*
>  	 * Note that PASID must be enabled before, and disabled after ATS:
> diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
> index e505b9130a1c..a9d2df001149 100644
> --- a/drivers/iommu/of_iommu.c
> +++ b/drivers/iommu/of_iommu.c
> @@ -210,11 +210,6 @@ const struct iommu_ops *of_iommu_configure(struct device *dev,
>  					     of_pci_iommu_init, &info);
>  	} else {
>  		err = of_iommu_configure_device(master_np, dev, id);
> -
> -		fwspec = dev_iommu_fwspec_get(dev);
> -		if (!err && fwspec)
> -			of_property_read_u32(master_np, "pasid-num-bits",
> -					     &fwspec->num_pasid_bits);
>  	}
>  
>  	/*
diff mbox series

Patch

diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 26bcde5e7746..583c734b2e87 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -570,7 +570,6 @@  struct iommu_group *fsl_mc_device_group(struct device *dev);
  * struct iommu_fwspec - per-device IOMMU instance data
  * @ops: ops for this device's IOMMU
  * @iommu_fwnode: firmware handle for this device's IOMMU
- * @num_pasid_bits: number of PASID bits supported by this device
  * @num_ids: number of associated device IDs
  * @ids: IDs which this device may present to the IOMMU
  */
@@ -578,7 +577,6 @@  struct iommu_fwspec {
 	const struct iommu_ops	*ops;
 	struct fwnode_handle	*iommu_fwnode;
 	u32			flags;
-	u32			num_pasid_bits;
 	unsigned int		num_ids;
 	u32			ids[];
 };
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index d4eac6d7e9fb..c9a8bbb74b09 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -968,15 +968,16 @@  static int iort_pci_iommu_init(struct pci_dev *pdev, u16 alias, void *data)
 static void iort_named_component_init(struct device *dev,
 				      struct acpi_iort_node *node)
 {
+	struct property_entry props[2] = {};
 	struct acpi_iort_named_component *nc;
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-
-	if (!fwspec)
-		return;
 
 	nc = (struct acpi_iort_named_component *)node->node_data;
-	fwspec->num_pasid_bits = FIELD_GET(ACPI_IORT_NC_PASID_BITS,
-					   nc->node_flags);
+	props[0] = PROPERTY_ENTRY_U32("pasid-num-bits",
+				      FIELD_GET(ACPI_IORT_NC_PASID_BITS,
+						nc->node_flags));
+
+	if (device_add_properties(dev, props))
+		dev_warn(dev, "Could not add device properties\n");
 }
 
 static int iort_nc_iommu_map(struct device *dev, struct acpi_iort_node *node)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 8ca7415d785d..6a53b4edf054 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -2366,7 +2366,8 @@  static struct iommu_device *arm_smmu_probe_device(struct device *dev)
 		}
 	}
 
-	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
+	device_property_read_u32(dev, "pasid-num-bits", &master->ssid_bits);
+	master->ssid_bits = min(smmu->ssid_bits, master->ssid_bits);
 
 	/*
 	 * Note that PASID must be enabled before, and disabled after ATS:
diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
index e505b9130a1c..a9d2df001149 100644
--- a/drivers/iommu/of_iommu.c
+++ b/drivers/iommu/of_iommu.c
@@ -210,11 +210,6 @@  const struct iommu_ops *of_iommu_configure(struct device *dev,
 					     of_pci_iommu_init, &info);
 	} else {
 		err = of_iommu_configure_device(master_np, dev, id);
-
-		fwspec = dev_iommu_fwspec_get(dev);
-		if (!err && fwspec)
-			of_property_read_u32(master_np, "pasid-num-bits",
-					     &fwspec->num_pasid_bits);
 	}
 
 	/*