| Message ID | 20210108163004.492649-1-j.neuschaefer@gmx.net |
|---|---|
| State | Accepted |
| Commit | e1922b5da0e6869f1850c4447bed0b9cb1cf5034 |
| Headers | show |
| Series | [v2] dt-bindings: timer: nuvoton: Clarify that interrupt of timer 0 should be specified | expand |
On Fri, Jan 8, 2021 at 6:30 PM Jonathan Neuschäfer <j.neuschaefer@gmx.net> wrote: > > The NPCM750 Timer/Watchdog Controller has multiple interrupt lines, > connected to multiple timers. The driver uses timer 0 for timer > interrupts, so the interrupt line corresponding to timer 0 should be > specified in DT. > > I removed the mention of "flags for falling edge", because the timer > controller uses high-level interrupts rather than falling-edge > interrupts, and whether flags should be specified is up the interrupt > controller's DT binding. > > Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by Avi Fishman <avifishman70@gmail.com> > --- > > v2: > - Fix a typo in the word "watchdog" > --- > .../devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt > index ea22dfe485bee..97258f1a1505b 100644 > --- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt > +++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt > @@ -6,8 +6,7 @@ timer counters. > Required properties: > - compatible : "nuvoton,npcm750-timer" for Poleg NPCM750. > - reg : Offset and length of the register set for the device. > -- interrupts : Contain the timer interrupt with flags for > - falling edge. > +- interrupts : Contain the timer interrupt of timer 0. > - clocks : phandle of timer reference clock (usually a 25 MHz clock). > > Example: > -- > 2.29.2 > -- Regards, Avi
On Fri, 08 Jan 2021 17:30:04 +0100, Jonathan Neuschäfer wrote: > The NPCM750 Timer/Watchdog Controller has multiple interrupt lines, > connected to multiple timers. The driver uses timer 0 for timer > interrupts, so the interrupt line corresponding to timer 0 should be > specified in DT. > > I removed the mention of "flags for falling edge", because the timer > controller uses high-level interrupts rather than falling-edge > interrupts, and whether flags should be specified is up the interrupt > controller's DT binding. > > Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> > --- > > v2: > - Fix a typo in the word "watchdog" > --- > .../devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > Acked-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt index ea22dfe485bee..97258f1a1505b 100644 --- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt +++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt @@ -6,8 +6,7 @@ timer counters. Required properties: - compatible : "nuvoton,npcm750-timer" for Poleg NPCM750. - reg : Offset and length of the register set for the device. -- interrupts : Contain the timer interrupt with flags for - falling edge. +- interrupts : Contain the timer interrupt of timer 0. - clocks : phandle of timer reference clock (usually a 25 MHz clock). Example:
The NPCM750 Timer/Watchdog Controller has multiple interrupt lines, connected to multiple timers. The driver uses timer 0 for timer interrupts, so the interrupt line corresponding to timer 0 should be specified in DT. I removed the mention of "flags for falling edge", because the timer controller uses high-level interrupts rather than falling-edge interrupts, and whether flags should be specified is up the interrupt controller's DT binding. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> --- v2: - Fix a typo in the word "watchdog" --- .../devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) -- 2.29.2