diff mbox

[08/11,v5] coresight: adding documentation for coresight

Message ID 1409159852-7249-9-git-send-email-mathieu.poirier@linaro.org
State New
Headers show

Commit Message

Mathieu Poirier Aug. 27, 2014, 5:17 p.m. UTC
From: Mathieu Poirier <mathieu.poirier@linaro.org>

Documentation for the coresight framework and drivers.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 Documentation/trace/coresight.txt | 237 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 237 insertions(+)
 create mode 100644 Documentation/trace/coresight.txt

Comments

Linus Walleij Sept. 3, 2014, 8:43 a.m. UTC | #1
On Wed, Aug 27, 2014 at 7:17 PM,  <mathieu.poirier@linaro.org> wrote:

> From: Mathieu Poirier <mathieu.poirier@linaro.org>
>
> Documentation for the coresight framework and drivers.
>
> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
(...)
>  Documentation/trace/coresight.txt | 237 ++++++++++++++++++++++++++++++++++++++

I guess you agreed on this location? If it's ARM-specific,
Documentation/arm/coresight.txt
is an alternative.

> +The file cstrace.bin can be decompressed using "ptm2human", DS-5 or Trace32.

Is ptm2human a candidate for the kernel tools/ directory?

Maybe not now but later?

+root@linaro-developer:/sys/kernel/debug/coresight# ls

Maybe reduce noise here:

root:/sys/kernel/debug/coresight# ls

The reader probably does not need to know the name of your
development system.

Yours,
Linus Walleij
Mathieu Poirier Sept. 8, 2014, 9:51 p.m. UTC | #2
Apologies on the late reply - I was doing a quick review of your
earlier comments before getting ready for another submission when I
remembered I hadn't address this one.  Pls see below.

On 3 September 2014 02:43, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Wed, Aug 27, 2014 at 7:17 PM,  <mathieu.poirier@linaro.org> wrote:
>
>> From: Mathieu Poirier <mathieu.poirier@linaro.org>
>>
>> Documentation for the coresight framework and drivers.
>>
>> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> (...)
>>  Documentation/trace/coresight.txt | 237 ++++++++++++++++++++++++++++++++++++++
>
> I guess you agreed on this location? If it's ARM-specific,
> Documentation/arm/coresight.txt
> is an alternative.

I didn't have prior agreement with anyone before - it was simply
dropped there to get the conversation started.  Very well, I'll move
it to @arm.

>
>> +The file cstrace.bin can be decompressed using "ptm2human", DS-5 or Trace32.
>
> Is ptm2human a candidate for the kernel tools/ directory?

A fair amount of work would have to be invested in "ptm2human" to make
it production ready.

>
> Maybe not now but later?
>
> +root@linaro-developer:/sys/kernel/debug/coresight# ls
>
> Maybe reduce noise here:
>
> root:/sys/kernel/debug/coresight# ls
>
> The reader probably does not need to know the name of your
> development system.

Ok.

>
> Yours,
> Linus Walleij
diff mbox

Patch

diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt
new file mode 100644
index 0000000..ee852a0
--- /dev/null
+++ b/Documentation/trace/coresight.txt
@@ -0,0 +1,237 @@ 
+		Coresight - HW Assisted Tracing on ARM
+		======================================
+
+   Author:   Mathieu Poirier <mathieu.poirier@linaro.org>
+   Date:     August 27th 2014
+
+Introduction
+------------
+
+Coresight is an umbrella of technologies allowing for the debugging of ARM
+based SoC.  It includes solutions for JTAG and HW assisted tracing.  This
+document is concerned with the latter.
+
+HW assisted tracing is becoming increasingly useful when dealing with systems
+that have many SoCs and other components like GPU and DMA engines.  ARM has
+developed a HW assisted tracing solution by means of different components, each
+being added to a design at systhesis time to cater to specific tracing needs.
+Compoments are generally categorised as source, link and sinks and are
+(usually) discovered using the AMBA bus.
+
+"Sources" generate a compressed stream representing the processor instruction
+path based on tracing scenarios as configured by users.  From there the stream
+flows through the coresight system (via ATB bus) using links that are connecting
+the emanating source to a sink(s).  Sinks serve as endpoints to the coresight
+implementation, either storing the compressed stream in a memory buffer or
+creating an interface to the outside world where data can be transfered to a
+host without fear of filling up the onboard coresight memory buffer.
+
+
+Acronyms and Classification
+---------------------------
+
+Acronyms:
+
+PTM:     Program Trace Macrocell
+ETM:     Embedded Trace Macrocell
+STM:     System trace Macrocell
+ETB:     Embedded Trace Buffer
+ITM:     Instrumentation Trace Macrocell
+TPIU:    Trace Port Interface Unit
+TMC-ETR: Trace Memory Controller, configured as Embedded Trace Router
+TMC-ETF: Trace Memory Controller, configured as Embedded Trace FIFO
+CTI:     Cross Trigger Interface
+
+Classification:
+
+Source:
+   ETMv3.x ETMv4, PTMv1.0, PTMv1.1, STM, STM500, ITM
+Link:
+   Funnel, replicator (intelligent or not), TMC-ETR
+Sinks:
+   ETBv1.0, ETB1.1, TPIU, TMC-ETF
+Misc:
+   CTI
+
+
+Device Tree Bindings
+----------------------
+
+See Documentation/devicetree/bindings/arm/coresight.txt for details.
+
+As of this writing drivers for ITM, STMs and CTIs are not provided but are
+expected to be added as the solution matures.
+
+
+Framework and implementation
+----------------------------
+
+The coresight framework provides a central point to represent, configure and
+manage coresight devices on a platform.  Any coresight compliant device can
+register with the framework for as long as they use the right APIs:
+
+struct coresight_device *coresight_register(struct coresight_desc *desc);
+void coresight_unregister(struct coresight_device *csdev);
+
+The registering function is taking a "struct coresight_device *csdev" and
+register the device with the core framework.  The unregister function takes
+a reference to a "strut coresight_device", obtained at registration time.
+
+If everything goes well during the registration process the new devices will
+show up under /sys/kernel/debug/coresight/, as showns here for a TC2 platform:
+
+root@linaro-developer:~# ls /sys/kernel/debug/coresight/
+00000000.replicator  20030000.tpiu    2201c000.ptm  2203c000.etm  2203e000.etm
+20010000.etb         20040000.funnel  2201d000.ptm  2203d000.etm
+root@linaro-developer:~#
+
+The functions take a "struct coresight_device", which looks like this:
+
+struct coresight_desc {
+        enum coresight_dev_type type;
+        struct coresight_dev_subtype subtype;
+        const struct coresight_ops *ops;
+        struct coresight_platform_data *pdata;
+        struct device *dev;
+        const struct coresight_ops_entry **debugfs_ops;
+        struct module *owner;
+};
+
+
+The "coresight_dev_type" identifies what the device is, i.e, source link or
+sink while the "coresight_dev_subtype" will characterise that type further.
+
+The "struct coresight_ops" is mandatory and will tell the framework how to
+perform base operations related to the components, each component having
+a different set of requirement.  For that "struct coresight_ops_sink",
+"struct coresight_ops_link" and "struct coresight_ops_source" have been
+provided.
+
+The next field, "struct coresight_platform_data *pdata" is acquired by calling
+"of_get_coresight_platform_data()", as part of the driver's _probe routine and
+"struct device *dev" gets the device reference embedded in the "amba_device":
+
+static int etm_probe(struct amba_device *adev, const struct amba_id *id)
+{
+ ...
+ ...
+ drvdata->dev = &adev->dev;
+ ...
+}
+
+Specific class of device (source, link, or sink) have generic operations
+that can be performed on them (see "struct coresight_ops").  The
+"**debugfs_ops" is a list of debugfs entries pertaining to operations
+specific to that component only.  "Implementation defined" customisations are
+expected to be accessed and controlled using those entries.
+
+Last but not least, "struct module *owner" is expected to be set to reflect
+the information carried in "THIS_MODULE".
+
+How to use
+----------
+
+Before trace collection can start, a coresight sink needs to be identify.
+There is no limit on the amount of sinks (nor sources) that can be enabled at
+any given moment.  As a generic operation, all device pertaining to the sink
+class will have an "active" entry in debugfs:
+
+root@linaro-developer:/sys/kernel/debug/coresight# ls
+00000000.replicator  20030000.tpiu    2201c000.ptm  2203c000.etm  2203e000.etm
+20010000.etb         20040000.funnel  2201d000.ptm  2203d000.etm
+root@linaro-developer:/sys/kernel/debug/coresight# ls 20010000.etb
+active  status  trigger_cntr
+root@linaro-developer:/sys/kernel/debug/coresight# echo 1 > 20010000.etb/active
+root@linaro-developer:/sys/kernel/debug/coresight# cat 20010000.etb/active
+1
+root@linaro-developer:/sys/kernel/debug/coresight#
+
+At boot time the current etm3x driver will configure the first address
+comparator with "_stext" and "_etext", essentially tracing any instruction
+that falls within that range.  As such "enabling" a source will immediately
+trigger a trace capture:
+
+root@linaro-developer:/sys/kernel/debug/coresight# echo 1 > 2201c000.ptm/enable
+root@linaro-developer:/sys/kernel/debug/coresight# cat 2201c000.ptm/enable
+1
+root@linaro-developer:/sys/kernel/debug/coresight# cat 20010000.etb/status
+Depth:          0x2000
+Status:         0x1
+RAM read ptr:   0x0
+RAM wrt ptr:    0x19d3   <----- The write pointer is moving
+Trigger cnt:    0x0
+Control:        0x1
+Flush status:   0x0
+Flush ctrl:     0x2001
+root@linaro-developer:/sys/kernel/debug/coresight#
+
+Trace collection is stopped the same way:
+
+root@linaro-developer:/sys/kernel/debug/coresight# echo 0 > 2201c000.ptm/enable
+root@linaro-developer:/sys/kernel/debug/coresight#
+
+The content of the ETB buffer can be harvested directly from /dev:
+
+root@linaro-developer:/sys/kernel/debug/coresight# dd if=/dev/20010000.etb \
+of=~/cstrace.bin
+
+64+0 records in
+64+0 records out
+32768 bytes (33 kB) copied, 0.00125258 s, 26.2 MB/s
+root@linaro-developer:/sys/kernel/debug/coresight#
+
+The file cstrace.bin can be decompressed using "ptm2human", DS-5 or Trace32.
+
+Following is a DS-5 output of an experimental loop that increments a variable up
+to a certain value.  The example is simple and yet provides a glimpse of the
+wealth of possibilities that coresight provides.
+
+Info                                    Tracing enabled
+Instruction     106378866       0x8026B53C      E52DE004        false   PUSH     {lr}
+Instruction     0       0x8026B540      E24DD00C        false   SUB      sp,sp,#0xc
+Instruction     0       0x8026B544      E3A03000        false   MOV      r3,#0
+Instruction     0       0x8026B548      E58D3004        false   STR      r3,[sp,#4]
+Instruction     0       0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
+Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
+Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
+Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
+Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
+Timestamp                                       Timestamp: 17106715833
+Instruction     319     0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
+Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
+Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
+Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
+Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
+Instruction     9       0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
+Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
+Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
+Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
+Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
+Instruction     7       0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
+Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
+Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
+Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
+Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
+Instruction     7       0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
+Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
+Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
+Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
+Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
+Instruction     10      0x8026B54C      E59D3004        false   LDR      r3,[sp,#4]
+Instruction     0       0x8026B550      E3530004        false   CMP      r3,#4
+Instruction     0       0x8026B554      E2833001        false   ADD      r3,r3,#1
+Instruction     0       0x8026B558      E58D3004        false   STR      r3,[sp,#4]
+Instruction     0       0x8026B55C      DAFFFFFA        true    BLE      {pc}-0x10 ; 0x8026b54c
+Instruction     6       0x8026B560      EE1D3F30        false   MRC      p15,#0x0,r3,c13,c0,#1
+Instruction     0       0x8026B564      E1A0100D        false   MOV      r1,sp
+Instruction     0       0x8026B568      E3C12D7F        false   BIC      r2,r1,#0x1fc0
+Instruction     0       0x8026B56C      E3C2203F        false   BIC      r2,r2,#0x3f
+Instruction     0       0x8026B570      E59D1004        false   LDR      r1,[sp,#4]
+Instruction     0       0x8026B574      E59F0010        false   LDR      r0,[pc,#16] ; [0x8026B58C] = 0x80550368
+Instruction     0       0x8026B578      E592200C        false   LDR      r2,[r2,#0xc]
+Instruction     0       0x8026B57C      E59221D0        false   LDR      r2,[r2,#0x1d0]
+Instruction     0       0x8026B580      EB07A4CF        true    BL       {pc}+0x1e9344 ; 0x804548c4
+Info                                    Tracing enabled
+Instruction     13570831        0x8026B584      E28DD00C        false   ADD      sp,sp,#0xc
+Instruction     0       0x8026B588      E8BD8000        true    LDM      sp!,{pc}
+Timestamp                                       Timestamp: 17107041535