diff mbox series

[v2,7/7] arm64: dts: pmi8998: Add the right interrupts for LAB/IBB SCP and OCP

Message ID 20210113194214.522238-8-angelogioacchino.delregno@somainline.org
State Superseded
Headers show
Series Really implement Qualcomm LAB/IBB regulators | expand

Commit Message

AngeloGioacchino Del Regno Jan. 13, 2021, 7:42 p.m. UTC
In commit 208921bae696 ("arm64: dts: qcom: pmi8998: Add nodes for
LAB and IBB regulators") bindings for the lab/ibb regulators were
added to the pmi8998 dt, but the original committer has never
specified what the interrupts were for.
LAB and IBB regulators provide two interrupts, SC-ERR (short
circuit error) and VREG-OK but, in that commit, the regulators
were provided with two different types of interrupts;
specifically, IBB had the SC-ERR interrupt, while LAB had the
VREG-OK one, none of which were (luckily) used, since the driver
didn't actually use these at all.
Assuming that the original intention was to have the SC IRQ in
both LAB and IBB, as per the names appearing in documentation,
fix the SCP interrupt.

While at it, also add the OCP interrupt in order to be able to
enable the Over-Current Protection feature, if requested.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 arch/arm64/boot/dts/qcom/pmi8998.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

Comments

Bjorn Andersson Jan. 15, 2021, 5:37 a.m. UTC | #1
On Wed 13 Jan 13:42 CST 2021, AngeloGioacchino Del Regno wrote:

> In commit 208921bae696 ("arm64: dts: qcom: pmi8998: Add nodes for
> LAB and IBB regulators") bindings for the lab/ibb regulators were
> added to the pmi8998 dt, but the original committer has never
> specified what the interrupts were for.
> LAB and IBB regulators provide two interrupts, SC-ERR (short
> circuit error) and VREG-OK but, in that commit, the regulators
> were provided with two different types of interrupts;
> specifically, IBB had the SC-ERR interrupt, while LAB had the
> VREG-OK one, none of which were (luckily) used, since the driver
> didn't actually use these at all.
> Assuming that the original intention was to have the SC IRQ in
> both LAB and IBB, as per the names appearing in documentation,
> fix the SCP interrupt.
> 
> While at it, also add the OCP interrupt in order to be able to
> enable the Over-Current Protection feature, if requested.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
> ---
>  arch/arm64/boot/dts/qcom/pmi8998.dtsi | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> index d016b12967eb..d230c510d4b7 100644
> --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> @@ -30,11 +30,15 @@ labibb {
>  			compatible = "qcom,pmi8998-lab-ibb";
>  
>  			ibb: ibb {
> -				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>;
> +				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
> +					     <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupt-names = "sc-err", "ocp";
>  			};
>  
>  			lab: lab {
> -				interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>;
> +				interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
> +					     <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
> +				interrupt-names = "sc-err", "ocp";
>  			};
>  		};
>  	};
> -- 
> 2.29.2
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index d016b12967eb..d230c510d4b7 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -30,11 +30,15 @@  labibb {
 			compatible = "qcom,pmi8998-lab-ibb";
 
 			ibb: ibb {
-				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+					     <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "sc-err", "ocp";
 			};
 
 			lab: lab {
-				interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+					     <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-names = "sc-err", "ocp";
 			};
 		};
 	};