diff mbox series

[v3,net-next,06/15] net: mscc: ocelot: only drain extraction queue on error

Message ID 20210118161731.2837700-7-olteanv@gmail.com
State Superseded
Headers show
Series [v3,net-next,01/15] net: dsa: tag_8021q: add helpers to deduce whether a VLAN ID is RX or TX VLAN | expand

Commit Message

Vladimir Oltean Jan. 18, 2021, 4:17 p.m. UTC 
From: Vladimir Oltean <vladimir.oltean@nxp.com>

It appears that the intention of this snippet of code is to not exit
ocelot_xtr_irq_handler() while in the middle of extracting a frame.
The problem in extracting it word by word is that future extraction
attempts are really easy to get desynchronized, since the IRQ handler
assumes that the first 16 bytes are the IFH, which give further
information about the frame, such as frame length.

But during normal operation, "err" will not be 0, but 4, set from here:

		for (i = 0; i < OCELOT_TAG_LEN / 4; i++) {
			err = ocelot_rx_frame_word(ocelot, grp, true, &ifh[i]);
			if (err != 4)
				break;
		}

		if (err != 4)
			break;

In that case, draining the extraction queue is a no-op. So explicitly
make this code execute only on negative err.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Changes in v3:
None.

Changes in v2:
Patch is new.

 drivers/net/ethernet/mscc/ocelot_vsc7514.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mscc/ocelot_vsc7514.c b/drivers/net/ethernet/mscc/ocelot_vsc7514.c
index 917243c4a19d..d4cf6eeff3c9 100644
--- a/drivers/net/ethernet/mscc/ocelot_vsc7514.c
+++ b/drivers/net/ethernet/mscc/ocelot_vsc7514.c
@@ -701,7 +701,7 @@  static irqreturn_t ocelot_xtr_irq_handler(int irq, void *arg)
 		dev->stats.rx_packets++;
 	}
 
-	if (err)
+	if (err < 0)
 		while (ocelot_read(ocelot, QS_XTR_DATA_PRESENT) & BIT(grp))
 			ocelot_read_rix(ocelot, QS_XTR_RD, grp);