diff mbox series

[v2,2/5] dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64

Message ID 20210119163927.774-3-d-gerlach@ti.com
State Superseded
Headers show
Series arm64: Initial support for Texas Instruments AM642 Platform | expand

Commit Message

Dave Gerlach Jan. 19, 2021, 4:39 p.m. UTC
Add pinctrl macros for AM64 SoC. These macro definitions are similar to
that of previous platforms, but adding new definitions to avoid any
naming confusions in the soc dts files.

Unlike what checkpatch insists, we do not need parentheses enclosing
the values for this macro as we do intend it to generate two separate
values as has been done for other similar platforms.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
v1 -> v2:
* New patch to add needed macros for pinctrl in board dts.

 include/dt-bindings/pinctrl/k3.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/include/dt-bindings/pinctrl/k3.h b/include/dt-bindings/pinctrl/k3.h
index b0eea7cc6e23..e085f102b283 100644
--- a/include/dt-bindings/pinctrl/k3.h
+++ b/include/dt-bindings/pinctrl/k3.h
@@ -3,7 +3,7 @@ 
  * This header provides constants for pinctrl bindings for TI's K3 SoC
  * family.
  *
- * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2018-2021 Texas Instruments Incorporated - https://www.ti.com/
  */
 #ifndef _DT_BINDINGS_PINCTRL_TI_K3_H
 #define _DT_BINDINGS_PINCTRL_TI_K3_H
@@ -35,4 +35,7 @@ 
 #define J721E_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define J721E_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
+#define AM64X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM64X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
 #endif