diff mbox

hw/lan9118.c: Convert to MemoryRegion

Message ID 1314295174-20350-1-git-send-email-peter.maydell@linaro.org
State Accepted
Commit f0cdd7a9a80ca25f46a039a418db63dd3cc03f62
Headers show

Commit Message

Peter Maydell Aug. 25, 2011, 5:59 p.m. UTC
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
Another device I needed to convert so I could connect it to omap_gpmc
for an omap3 board (in this case overo).

 hw/lan9118.c |   29 +++++++++++------------------
 1 files changed, 11 insertions(+), 18 deletions(-)

Comments

Peter Maydell Sept. 9, 2011, 4:47 p.m. UTC | #1
Ping?

On 25 August 2011 18:59, Peter Maydell <peter.maydell@linaro.org> wrote:
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
> Another device I needed to convert so I could connect it to omap_gpmc
> for an omap3 board (in this case overo).
>
>  hw/lan9118.c |   29 +++++++++++------------------
>  1 files changed, 11 insertions(+), 18 deletions(-)
>
> diff --git a/hw/lan9118.c b/hw/lan9118.c
> index 73a8661..634b88e 100644
> --- a/hw/lan9118.c
> +++ b/hw/lan9118.c
> @@ -152,7 +152,7 @@ typedef struct {
>     NICState *nic;
>     NICConf conf;
>     qemu_irq irq;
> -    int mmio_index;
> +    MemoryRegion mmio;
>     ptimer_state *timer;
>
>     uint32_t irq_cfg;
> @@ -895,7 +895,7 @@ static void lan9118_tick(void *opaque)
>  }
>
>  static void lan9118_writel(void *opaque, target_phys_addr_t offset,
> -                           uint32_t val)
> +                           uint64_t val, unsigned size)
>  {
>     lan9118_state *s = (lan9118_state *)opaque;
>     offset &= 0xff;
> @@ -1022,13 +1022,14 @@ static void lan9118_writel(void *opaque, target_phys_addr_t offset,
>         break;
>
>     default:
> -        hw_error("lan9118_write: Bad reg 0x%x = %x\n", (int)offset, val);
> +        hw_error("lan9118_write: Bad reg 0x%x = %x\n", (int)offset, (int)val);
>         break;
>     }
>     lan9118_update(s);
>  }
>
> -static uint32_t lan9118_readl(void *opaque, target_phys_addr_t offset)
> +static uint64_t lan9118_readl(void *opaque, target_phys_addr_t offset,
> +                              unsigned size)
>  {
>     lan9118_state *s = (lan9118_state *)opaque;
>
> @@ -1101,16 +1102,10 @@ static uint32_t lan9118_readl(void *opaque, target_phys_addr_t offset)
>     return 0;
>  }
>
> -static CPUReadMemoryFunc * const lan9118_readfn[] = {
> -    lan9118_readl,
> -    lan9118_readl,
> -    lan9118_readl
> -};
> -
> -static CPUWriteMemoryFunc * const lan9118_writefn[] = {
> -    lan9118_writel,
> -    lan9118_writel,
> -    lan9118_writel
> +static const MemoryRegionOps lan9118_mem_ops = {
> +    .read = lan9118_readl,
> +    .write = lan9118_writel,
> +    .endianness = DEVICE_NATIVE_ENDIAN,
>  };
>
>  static void lan9118_cleanup(VLANClientState *nc)
> @@ -1135,10 +1130,8 @@ static int lan9118_init1(SysBusDevice *dev)
>     QEMUBH *bh;
>     int i;
>
> -    s->mmio_index = cpu_register_io_memory(lan9118_readfn,
> -                                           lan9118_writefn, s,
> -                                           DEVICE_NATIVE_ENDIAN);
> -    sysbus_init_mmio(dev, 0x100, s->mmio_index);
> +    memory_region_init_io(&s->mmio, &lan9118_mem_ops, s, "lan9118-mmio", 0x100);
> +    sysbus_init_mmio_region(dev, &s->mmio);
>     sysbus_init_irq(dev, &s->irq);
>     qemu_macaddr_default_if_unset(&s->conf.macaddr);
>
> --
> 1.7.1
Avi Kivity Sept. 12, 2011, 8:56 a.m. UTC | #2
On 09/09/2011 07:47 PM, Peter Maydell wrote:
> Ping?
>
> On 25 August 2011 18:59, Peter Maydell<peter.maydell@linaro.org>  wrote:
> >  Signed-off-by: Peter Maydell<peter.maydell@linaro.org>
> >  ---
> >  Another device I needed to convert so I could connect it to omap_gpmc
> >  for an omap3 board (in this case overo).
> >
>

Sorry - applied to memory/queue.
diff mbox

Patch

diff --git a/hw/lan9118.c b/hw/lan9118.c
index 73a8661..634b88e 100644
--- a/hw/lan9118.c
+++ b/hw/lan9118.c
@@ -152,7 +152,7 @@  typedef struct {
     NICState *nic;
     NICConf conf;
     qemu_irq irq;
-    int mmio_index;
+    MemoryRegion mmio;
     ptimer_state *timer;
 
     uint32_t irq_cfg;
@@ -895,7 +895,7 @@  static void lan9118_tick(void *opaque)
 }
 
 static void lan9118_writel(void *opaque, target_phys_addr_t offset,
-                           uint32_t val)
+                           uint64_t val, unsigned size)
 {
     lan9118_state *s = (lan9118_state *)opaque;
     offset &= 0xff;
@@ -1022,13 +1022,14 @@  static void lan9118_writel(void *opaque, target_phys_addr_t offset,
         break;
 
     default:
-        hw_error("lan9118_write: Bad reg 0x%x = %x\n", (int)offset, val);
+        hw_error("lan9118_write: Bad reg 0x%x = %x\n", (int)offset, (int)val);
         break;
     }
     lan9118_update(s);
 }
 
-static uint32_t lan9118_readl(void *opaque, target_phys_addr_t offset)
+static uint64_t lan9118_readl(void *opaque, target_phys_addr_t offset,
+                              unsigned size)
 {
     lan9118_state *s = (lan9118_state *)opaque;
 
@@ -1101,16 +1102,10 @@  static uint32_t lan9118_readl(void *opaque, target_phys_addr_t offset)
     return 0;
 }
 
-static CPUReadMemoryFunc * const lan9118_readfn[] = {
-    lan9118_readl,
-    lan9118_readl,
-    lan9118_readl
-};
-
-static CPUWriteMemoryFunc * const lan9118_writefn[] = {
-    lan9118_writel,
-    lan9118_writel,
-    lan9118_writel
+static const MemoryRegionOps lan9118_mem_ops = {
+    .read = lan9118_readl,
+    .write = lan9118_writel,
+    .endianness = DEVICE_NATIVE_ENDIAN,
 };
 
 static void lan9118_cleanup(VLANClientState *nc)
@@ -1135,10 +1130,8 @@  static int lan9118_init1(SysBusDevice *dev)
     QEMUBH *bh;
     int i;
 
-    s->mmio_index = cpu_register_io_memory(lan9118_readfn,
-                                           lan9118_writefn, s,
-                                           DEVICE_NATIVE_ENDIAN);
-    sysbus_init_mmio(dev, 0x100, s->mmio_index);
+    memory_region_init_io(&s->mmio, &lan9118_mem_ops, s, "lan9118-mmio", 0x100);
+    sysbus_init_mmio_region(dev, &s->mmio);
     sysbus_init_irq(dev, &s->irq);
     qemu_macaddr_default_if_unset(&s->conf.macaddr);