usb: dwc3: fix TRB completion when multiple TRBs are started

Message ID 1409926655-25183-1-git-send-email-balbi@ti.com
State Accepted
Commit 0b93a4c838fa10370d72f86fe712426ac63804de
Headers show

Commit Message

Felipe Balbi Sept. 5, 2014, 2:17 p.m.
After commit 2ec2a8be (usb: dwc3: gadget:
always enable IOC on bulk/interrupt transfers)
we created a situation where it was possible to
hang a bulk/interrupt endpoint if we had more
than one pending request in our queue and they
were both started with a single Start Transfer
command.

The problems triggers because we had not enabled
Transfer In Progress event for those endpoints
and we were not able to process early giveback
of requests completed without LST bit set.

Fix the problem by finally enabling Xfer In Progress
event for all endpoint types, except control.

Fixes: 2ec2a8be (usb: dwc3: gadget: always
	enable IOC on bulk/interrupt transfers)
Cc: <stable@vger.kernel.org> # v3.14+
Reported-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/dwc3/gadget.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

Patch

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index e8fb231..490a6ca 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -527,7 +527,7 @@  static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 		dep->stream_capable = true;
 	}
 
-	if (usb_endpoint_xfer_isoc(desc))
+	if (!usb_endpoint_xfer_control(desc))
 		params.param1 |= DWC3_DEPCFG_XFER_IN_PROGRESS_EN;
 
 	/*
@@ -2042,12 +2042,6 @@  static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 		dwc3_endpoint_transfer_complete(dwc, dep, event);
 		break;
 	case DWC3_DEPEVT_XFERINPROGRESS:
-		if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
-			dev_dbg(dwc->dev, "%s is not an Isochronous endpoint\n",
-					dep->name);
-			return;
-		}
-
 		dwc3_endpoint_transfer_complete(dwc, dep, event);
 		break;
 	case DWC3_DEPEVT_XFERNOTREADY: