diff mbox

[v10,09/10] PCI: Assign unassigned bus resources in pci_scan_root_bus()

Message ID 1410184472-17630-10-git-send-email-Liviu.Dudau@arm.com
State New
Headers show

Commit Message

Liviu Dudau Sept. 8, 2014, 1:54 p.m. UTC
If the firmware has not assigned all the bus resources and
we are not just probing the PCIe busses, it makes sense to
assign the unassigned resources in pci_scan_root_bus().

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
---
 drivers/pci/probe.c | 3 +++
 1 file changed, 3 insertions(+)

Comments

Suthikulpanit, Suravee Sept. 12, 2014, 10:13 a.m. UTC | #1
On 9/8/2014 8:54 AM, Liviu Dudau wrote:
> If the firmware has not assigned all the bus resources and
> we are not just probing the PCIe busses, it makes sense to
> assign the unassigned resources in pci_scan_root_bus().
>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
> ---
>   drivers/pci/probe.c | 3 +++
>   1 file changed, 3 insertions(+)
>
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index ef891d2..508cf61 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1953,6 +1953,9 @@ struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
>   	if (!found)
>   		pci_bus_update_busn_res_end(b, max);
>
> +	if (!pci_has_flag(PCI_PROBE_ONLY))
> +		pci_assign_unassigned_bus_resources(b);
> +
>   	pci_bus_add_devices(b);
>   	return b;
>   }
>

Liviu,

Besides the check for PCI_PROBE_ONLY here, I think we also need to avoid calling
"pci_enable_resources()" in the "driver/pci/pci.c: pcibios_enable_device()" for
PCI_PROBE_ONLY mode since the resource is not assigned by Linux. Otherwise, the
"drivers/pci/setup-res.c: pci_enable_resource()" would fail w/ error:

     can't enable device: BAR ..... not assigned

Actually, in "arch/arm/kernel/bios32.c:", the weak "pcibios_enable_device()" function
also has the check for PCI_PROBE_ONLY mode before calling pci_enable_resources().

Thanks,

Suravee

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Liviu Dudau Sept. 12, 2014, 10:34 a.m. UTC | #2
On Fri, Sep 12, 2014 at 11:13:51AM +0100, Suravee Suthikulpanit wrote:
> On 9/8/2014 8:54 AM, Liviu Dudau wrote:
> > If the firmware has not assigned all the bus resources and
> > we are not just probing the PCIe busses, it makes sense to
> > assign the unassigned resources in pci_scan_root_bus().
> >
> > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > Cc: Arnd Bergmann <arnd@arndb.de>
> > Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
> > ---
> >   drivers/pci/probe.c | 3 +++
> >   1 file changed, 3 insertions(+)
> >
> > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> > index ef891d2..508cf61 100644
> > --- a/drivers/pci/probe.c
> > +++ b/drivers/pci/probe.c
> > @@ -1953,6 +1953,9 @@ struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
> >   	if (!found)
> >   		pci_bus_update_busn_res_end(b, max);
> >
> > +	if (!pci_has_flag(PCI_PROBE_ONLY))
> > +		pci_assign_unassigned_bus_resources(b);
> > +
> >   	pci_bus_add_devices(b);
> >   	return b;
> >   }
> >
> 
> Liviu,
> 
> Besides the check for PCI_PROBE_ONLY here, I think we also need to avoid calling
> "pci_enable_resources()" in the "driver/pci/pci.c: pcibios_enable_device()" for
> PCI_PROBE_ONLY mode since the resource is not assigned by Linux. Otherwise, the
> "drivers/pci/setup-res.c: pci_enable_resource()" would fail w/ error:
> 
>      can't enable device: BAR ..... not assigned

Hmm, are you sure that is not because the host bridge resources have not been
requested? pci-host-generic.c uses PCI_PROBE_ONLY and yet it works with the series as
is. But it does request_resource() for the host bridge resources inside the driver.

Best regards,
Liviu

> 
> Actually, in "arch/arm/kernel/bios32.c:", the weak "pcibios_enable_device()" function
> also has the check for PCI_PROBE_ONLY mode before calling pci_enable_resources().
> 
> Thanks,
> 
> Suravee
> 
>
diff mbox

Patch

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index ef891d2..508cf61 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1953,6 +1953,9 @@  struct pci_bus *pci_scan_root_bus(struct device *parent, int bus,
 	if (!found)
 		pci_bus_update_busn_res_end(b, max);
 
+	if (!pci_has_flag(PCI_PROBE_ONLY))
+		pci_assign_unassigned_bus_resources(b);
+
 	pci_bus_add_devices(b);
 	return b;
 }