| Message ID | 20210131013124.54484-1-konrad.dybcio@somainline.org |
|---|---|
| State | Accepted |
| Commit | 557a28811c7e0286d3816842032db5eb7bb5f156 |
| Headers | show |
| Series | phy: qualcomm: usb28nm: Add MDM9607 init sequence | expand |
On 31-01-21, 02:31, Konrad Dybcio wrote:
> This is required to bring up the PHY on MDM9607-based boards.
Applied, thanks
--
~Vinod
Hello: This patch was applied to qcom/linux.git (refs/heads/for-next): On Sun, 31 Jan 2021 02:31:24 +0100 you wrote: > This is required to bring up the PHY on MDM9607-based boards. > > Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> > --- > .../devicetree/bindings/phy/qcom,usb-hs-28nm.yaml | 1 + > drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c | 13 +++++++++++++ > 2 files changed, 14 insertions(+) Here is the summary with links: - phy: qualcomm: usb28nm: Add MDM9607 init sequence https://git.kernel.org/qcom/c/557a28811c7e You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml index ca6a0836b53c..abcc4373f39e 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-28nm.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - qcom,usb-hs-28nm-femtophy + - qcom,usb-hs-28nm-mdm9607 reg: maxItems: 1 diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c index a52a9bf13b75..8807e59a1162 100644 --- a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c +++ b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c @@ -401,13 +401,26 @@ static const struct hsphy_init_seq init_seq_femtophy[] = { HSPHY_INIT_CFG(0x90, 0x60, 0), }; +static const struct hsphy_init_seq init_seq_mdm9607[] = { + HSPHY_INIT_CFG(0x80, 0x44, 0), + HSPHY_INIT_CFG(0x81, 0x38, 0), + HSPHY_INIT_CFG(0x82, 0x24, 0), + HSPHY_INIT_CFG(0x83, 0x13, 0), +}; + static const struct hsphy_data hsphy_data_femtophy = { .init_seq = init_seq_femtophy, .init_seq_num = ARRAY_SIZE(init_seq_femtophy), }; +static const struct hsphy_data hsphy_data_mdm9607 = { + .init_seq = init_seq_mdm9607, + .init_seq_num = ARRAY_SIZE(init_seq_mdm9607), +}; + static const struct of_device_id qcom_snps_hsphy_match[] = { { .compatible = "qcom,usb-hs-28nm-femtophy", .data = &hsphy_data_femtophy, }, + { .compatible = "qcom,usb-hs-28nm-mdm9607", .data = &hsphy_data_mdm9607, }, { }, }; MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_match);
This is required to bring up the PHY on MDM9607-based boards. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> --- .../devicetree/bindings/phy/qcom,usb-hs-28nm.yaml | 1 + drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c | 13 +++++++++++++ 2 files changed, 14 insertions(+)