diff mbox series

[v1,2/5] ACPI: battery: Clean up printing messages

Message ID 1996712.1aSbzQgNOC@kreacher
State Superseded
Headers show
Series None | expand

Commit Message

Rafael J. Wysocki Feb. 1, 2021, 6:16 p.m. UTC
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in battery.c with acpi_handle_debug() and acpi_handle_info() calls,
respectively, drop the _COMPONENT and ACPI_MODULE_NAME() definitions
that are not used any more, drop the no longer needed
ACPI_BATTERY_COMPONENT definition from the headers and update the
documentation accordingly.

While at it, update the pr_fmt() definition and drop the unneeded
PREFIX sybmbol definition from battery.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 Documentation/firmware-guide/acpi/debug.rst |    1 
 drivers/acpi/battery.c                      |   29 ++++++++++++++--------------
 drivers/acpi/sysfs.c                        |    1 
 include/acpi/acpi_drivers.h                 |    1 
 4 files changed, 15 insertions(+), 17 deletions(-)

Comments

Rafael J. Wysocki Feb. 1, 2021, 6:44 p.m. UTC | #1
On Mon, Feb 1, 2021 at 7:37 PM Joe Perches <joe@perches.com> wrote:
>
> On Mon, 2021-02-01 at 19:16 +0100, Rafael J. Wysocki wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >
> > Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
> > in battery.c with acpi_handle_debug() and acpi_handle_info() calls,
> > respectively, drop the _COMPONENT and ACPI_MODULE_NAME() definitions
> > that are not used any more, drop the no longer needed
> > ACPI_BATTERY_COMPONENT definition from the headers and update the
> > documentation accordingly.
> >
> > While at it, update the pr_fmt() definition and drop the unneeded
> > PREFIX sybmbol definition from battery.c.
> []
> > --- linux-pm.orig/drivers/acpi/battery.c
> []
> > @@ -466,7 +460,8 @@ static int extract_package(struct acpi_b
> >  static int acpi_battery_get_status(struct acpi_battery *battery)
> >  {
> >       if (acpi_bus_get_status(battery->device)) {
> > -             ACPI_EXCEPTION((AE_INFO, AE_ERROR, "Evaluating _STA"));
> > +             acpi_handle_info(battery->device->handle,
> > +                              "_STA evaluation failed\n");
>
> I believe this changes the logging level from KERN_ERR to KERN_INFO.
>
> Perhaps this and others should instead use acpi_handle_err()

Actually, these log level changes, because the messages in question
are not very urgent.

Something doesn't work and it's kind of good to know that, but there's
not much that can be done about it.
Joe Perches Feb. 2, 2021, 1:38 p.m. UTC | #2
On Mon, 2021-02-01 at 19:44 +0100, Rafael J. Wysocki wrote:
> On Mon, Feb 1, 2021 at 7:37 PM Joe Perches <joe@perches.com> wrote:
> > 
> > On Mon, 2021-02-01 at 19:16 +0100, Rafael J. Wysocki wrote:
> > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > > 
> > > Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
> > > in battery.c with acpi_handle_debug() and acpi_handle_info() calls,
> > > respectively, drop the _COMPONENT and ACPI_MODULE_NAME() definitions
> > > that are not used any more, drop the no longer needed
> > > ACPI_BATTERY_COMPONENT definition from the headers and update the
> > > documentation accordingly.
> > > 
> > > While at it, update the pr_fmt() definition and drop the unneeded
> > > PREFIX sybmbol definition from battery.c.
> > []
> > > --- linux-pm.orig/drivers/acpi/battery.c
> > []
> > > @@ -466,7 +460,8 @@ static int extract_package(struct acpi_b
> > >  static int acpi_battery_get_status(struct acpi_battery *battery)
> > >  {
> > >       if (acpi_bus_get_status(battery->device)) {
> > > -             ACPI_EXCEPTION((AE_INFO, AE_ERROR, "Evaluating _STA"));
> > > +             acpi_handle_info(battery->device->handle,
> > > +                              "_STA evaluation failed\n");
> > 
> > I believe this changes the logging level from KERN_ERR to KERN_INFO.
> > 
> > Perhaps this and others should instead use acpi_handle_err()
> 
> Actually, these log level changes, because the messages in question
> are not very urgent.
> 
> Something doesn't work and it's kind of good to know that, but there's
> not much that can be done about it.

That more argues for removal of KERN_<LEVEL> filtering.

I fail to see how difficult it is to change these to the existing
KERN_<LEVEL> using a simple acpi_handle_info() -> acpi_handle_err()
substitution where appropriate.

At a minimum, the commit message should note the KERN_<LEVEL> changes.
Rafael J. Wysocki Feb. 2, 2021, 2:09 p.m. UTC | #3
On Tue, Feb 2, 2021 at 2:38 PM Joe Perches <joe@perches.com> wrote:
>
> On Mon, 2021-02-01 at 19:44 +0100, Rafael J. Wysocki wrote:
> > On Mon, Feb 1, 2021 at 7:37 PM Joe Perches <joe@perches.com> wrote:
> > >
> > > On Mon, 2021-02-01 at 19:16 +0100, Rafael J. Wysocki wrote:
> > > > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > > >
> > > > Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
> > > > in battery.c with acpi_handle_debug() and acpi_handle_info() calls,
> > > > respectively, drop the _COMPONENT and ACPI_MODULE_NAME() definitions
> > > > that are not used any more, drop the no longer needed
> > > > ACPI_BATTERY_COMPONENT definition from the headers and update the
> > > > documentation accordingly.
> > > >
> > > > While at it, update the pr_fmt() definition and drop the unneeded
> > > > PREFIX sybmbol definition from battery.c.
> > > []
> > > > --- linux-pm.orig/drivers/acpi/battery.c
> > > []
> > > > @@ -466,7 +460,8 @@ static int extract_package(struct acpi_b
> > > >  static int acpi_battery_get_status(struct acpi_battery *battery)
> > > >  {
> > > >       if (acpi_bus_get_status(battery->device)) {
> > > > -             ACPI_EXCEPTION((AE_INFO, AE_ERROR, "Evaluating _STA"));
> > > > +             acpi_handle_info(battery->device->handle,
> > > > +                              "_STA evaluation failed\n");
> > >
> > > I believe this changes the logging level from KERN_ERR to KERN_INFO.
> > >
> > > Perhaps this and others should instead use acpi_handle_err()
> >
> > Actually, these log level changes, because the messages in question
> > are not very urgent.
> >
> > Something doesn't work and it's kind of good to know that, but there's
> > not much that can be done about it.
>
> That more argues for removal of KERN_<LEVEL> filtering.
>
> I fail to see how difficult it is to change these to the existing
> KERN_<LEVEL> using a simple acpi_handle_info() -> acpi_handle_err()
> substitution where appropriate.

I'm not really sure what you mean.

It is not a technical problem, but in my view the KERN_ERR log level
is excessive for these messages.

> At a minimum, the commit message should note the KERN_<LEVEL> changes.

OK, let me update the changelogs, then.
diff mbox series

Patch

Index: linux-pm/drivers/acpi/battery.c
===================================================================
--- linux-pm.orig/drivers/acpi/battery.c
+++ linux-pm/drivers/acpi/battery.c
@@ -8,7 +8,7 @@ 
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#define pr_fmt(fmt) "ACPI: battery: " fmt
 
 #include <linux/async.h>
 #include <linux/delay.h>
@@ -29,8 +29,6 @@ 
 
 #include <acpi/battery.h>
 
-#define PREFIX "ACPI: "
-
 #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF
 #define ACPI_BATTERY_CAPACITY_VALID(capacity) \
 	((capacity) != 0 && (capacity) != ACPI_BATTERY_VALUE_UNKNOWN)
@@ -44,10 +42,6 @@ 
 #define ACPI_BATTERY_STATE_CHARGING	0x2
 #define ACPI_BATTERY_STATE_CRITICAL	0x4
 
-#define _COMPONENT		ACPI_BATTERY_COMPONENT
-
-ACPI_MODULE_NAME("battery");
-
 MODULE_AUTHOR("Paul Diefenbaugh");
 MODULE_AUTHOR("Alexey Starikovskiy <astarikovskiy@suse.de>");
 MODULE_DESCRIPTION("ACPI Battery Driver");
@@ -466,7 +460,8 @@  static int extract_package(struct acpi_b
 static int acpi_battery_get_status(struct acpi_battery *battery)
 {
 	if (acpi_bus_get_status(battery->device)) {
-		ACPI_EXCEPTION((AE_INFO, AE_ERROR, "Evaluating _STA"));
+		acpi_handle_info(battery->device->handle,
+				 "_STA evaluation failed\n");
 		return -ENODEV;
 	}
 	return 0;
@@ -535,8 +530,10 @@  static int acpi_battery_get_info(struct
 		mutex_unlock(&battery->lock);
 
 		if (ACPI_FAILURE(status)) {
-			ACPI_EXCEPTION((AE_INFO, status, "Evaluating %s",
-					use_bix ? "_BIX":"_BIF"));
+			acpi_handle_info(battery->device->handle,
+					 "%s evaluation failed: %s\n",
+					 use_bix ?"_BIX":"_BIF",
+				         acpi_format_exception(status));
 		} else {
 			result = extract_battery_info(use_bix,
 						      battery,
@@ -573,7 +570,9 @@  static int acpi_battery_get_state(struct
 	mutex_unlock(&battery->lock);
 
 	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BST"));
+		acpi_handle_info(battery->device->handle,
+				 "_BST evaluation failed: %s",
+				 acpi_format_exception(status));
 		return -ENODEV;
 	}
 
@@ -625,7 +624,9 @@  static int acpi_battery_set_alarm(struct
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Alarm set to %d\n", battery->alarm));
+	acpi_handle_debug(battery->device->handle, "Alarm set to %d\n",
+			  battery->alarm);
+
 	return 0;
 }
 
@@ -1201,7 +1202,7 @@  static int acpi_battery_add(struct acpi_
 	if (result)
 		goto fail;
 
-	pr_info(PREFIX "%s Slot [%s] (battery %s)\n",
+	pr_info("%s Slot [%s] (battery %s)\n",
 		ACPI_BATTERY_DEVICE_NAME, acpi_device_bid(device),
 		device->status.battery_present ? "present" : "absent");
 
@@ -1282,7 +1283,7 @@  static void __init acpi_battery_init_asy
 	if (battery_check_pmic) {
 		for (i = 0; i < ARRAY_SIZE(acpi_battery_blacklist); i++)
 			if (acpi_dev_present(acpi_battery_blacklist[i], "1", -1)) {
-				pr_info(PREFIX ACPI_BATTERY_DEVICE_NAME
+				pr_info(ACPI_BATTERY_DEVICE_NAME
 					": found native %s PMIC, not loading\n",
 					acpi_battery_blacklist[i]);
 				return;
Index: linux-pm/Documentation/firmware-guide/acpi/debug.rst
===================================================================
--- linux-pm.orig/Documentation/firmware-guide/acpi/debug.rst
+++ linux-pm/Documentation/firmware-guide/acpi/debug.rst
@@ -52,7 +52,6 @@  shows the supported mask values, current
     ACPI_CA_DISASSEMBLER            0x00000800
     ACPI_COMPILER                   0x00001000
     ACPI_TOOLS                      0x00002000
-    ACPI_BATTERY_COMPONENT          0x00040000
     ACPI_BUTTON_COMPONENT           0x00080000
     ACPI_SBS_COMPONENT              0x00100000
     ACPI_FAN_COMPONENT              0x00200000
Index: linux-pm/drivers/acpi/sysfs.c
===================================================================
--- linux-pm.orig/drivers/acpi/sysfs.c
+++ linux-pm/drivers/acpi/sysfs.c
@@ -52,7 +52,6 @@  static const struct acpi_dlayer acpi_deb
 	ACPI_DEBUG_INIT(ACPI_COMPILER),
 	ACPI_DEBUG_INIT(ACPI_TOOLS),
 
-	ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT),
 	ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT),
 	ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT),
 	ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT),
Index: linux-pm/include/acpi/acpi_drivers.h
===================================================================
--- linux-pm.orig/include/acpi/acpi_drivers.h
+++ linux-pm/include/acpi/acpi_drivers.h
@@ -15,7 +15,6 @@ 
  * Please update drivers/acpi/debug.c and Documentation/firmware-guide/acpi/debug.rst
  * if you add to this list.
  */
-#define ACPI_BATTERY_COMPONENT		0x00040000
 #define ACPI_BUTTON_COMPONENT		0x00080000
 #define ACPI_SBS_COMPONENT		0x00100000
 #define ACPI_FAN_COMPONENT		0x00200000