| Message ID | 20210204161158.643-3-etremblay@distech-controls.com |
|---|---|
| State | New |
| Headers | show |
| Series | Handle UART without interrupt on TEMT using em485 | expand |
On Thu, Feb 04, 2021 at 11:11:57AM -0500, Eric Tremblay wrote: > This port doesn't have an interrupt on TEMT available when using s/This port/Port on Freescale ... (or what is that?)/ > the FIFO mode. With amended commit message Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> > Signed-off-by: Eric Tremblay <etremblay@distech-controls.com> > --- > drivers/tty/serial/8250/8250_port.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c > index 00c2cb64e8a7..dd904f736c61 100644 > --- a/drivers/tty/serial/8250/8250_port.c > +++ b/drivers/tty/serial/8250/8250_port.c > @@ -262,7 +262,7 @@ static const struct serial8250_config uart_config[] = { > .tx_loadsz = 63, > .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | > UART_FCR7_64BYTE, > - .flags = UART_CAP_FIFO, > + .flags = UART_CAP_FIFO | UART_CAP_NOTEMT, > }, > [PORT_RT2880] = { > .name = "Palmchip BK-3103", > -- > 2.17.1 > -- With Best Regards, Andy Shevchenko
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 00c2cb64e8a7..dd904f736c61 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -262,7 +262,7 @@ static const struct serial8250_config uart_config[] = { .tx_loadsz = 63, .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | UART_FCR7_64BYTE, - .flags = UART_CAP_FIFO, + .flags = UART_CAP_FIFO | UART_CAP_NOTEMT, }, [PORT_RT2880] = { .name = "Palmchip BK-3103",
This port doesn't have an interrupt on TEMT available when using the FIFO mode. Signed-off-by: Eric Tremblay <etremblay@distech-controls.com> --- drivers/tty/serial/8250/8250_port.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)