| Message ID | 20210209095948.15889-1-valentin.caron@foss.st.com |
|---|---|
| State | New |
| Headers | show |
| Series | dt-bindings: serial: stm32: add examples | expand |
On Tue, Feb 09, 2021 at 10:59:48AM +0100, Valentin Caron wrote: > From: Valentin Caron <valentin.caron@st.com> > > Add examples to show more use cases : > - uart2 with hardware flow control > - uart4 without flow control Why do I need these? I can go read your dts files if I need more examples. > > Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> > --- > .../bindings/serial/st,stm32-uart.yaml | 20 +++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml > index 06d5f251ec88..3a4aab5d1862 100644 > --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml > +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml > @@ -82,6 +82,26 @@ additionalProperties: false > examples: > - | > #include <dt-bindings/clock/stm32mp1-clks.h> > + > + usart4: serial@40004c00 { > + compatible = "st,stm32-uart"; > + reg = <0x40004c00 0x400>; > + interrupts = <52>; > + clocks = <&clk_pclk1>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usart4>; > + }; > + > + usart2: serial@40004400 { > + compatible = "st,stm32-uart"; > + reg = <0x40004400 0x400>; > + interrupts = <38>; > + clocks = <&clk_pclk1>; > + st,hw-flow-ctrl; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rtscts>; > + }; > + > usart1: serial@40011000 { > compatible = "st,stm32-uart"; > reg = <0x40011000 0x400>; > -- > 2.17.1 >
On 3/5/21 7:53 PM, Rob Herring wrote: > On Tue, Feb 09, 2021 at 10:59:48AM +0100, Valentin Caron wrote: >> From: Valentin Caron <valentin.caron@st.com> >> >> Add examples to show more use cases : >> - uart2 with hardware flow control >> - uart4 without flow control > Why do I need these? I can go read your dts files if I need more > examples. Hi, These examples were present in the dt-binding before the convertion to json : https://patchwork.kernel.org/project/linux-arm-kernel/patch/20200122095558.22553-3-benjamin.gaignard@st.com/ Would you like a v2 with this precision ? However this is not an essential patch, we can just drop it. > >> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> >> --- >> .../bindings/serial/st,stm32-uart.yaml | 20 +++++++++++++++++++ >> 1 file changed, 20 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml >> index 06d5f251ec88..3a4aab5d1862 100644 >> --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml >> +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml >> @@ -82,6 +82,26 @@ additionalProperties: false >> examples: >> - | >> #include <dt-bindings/clock/stm32mp1-clks.h> >> + >> + usart4: serial@40004c00 { >> + compatible = "st,stm32-uart"; >> + reg = <0x40004c00 0x400>; >> + interrupts = <52>; >> + clocks = <&clk_pclk1>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_usart4>; >> + }; >> + >> + usart2: serial@40004400 { >> + compatible = "st,stm32-uart"; >> + reg = <0x40004400 0x400>; >> + interrupts = <38>; >> + clocks = <&clk_pclk1>; >> + st,hw-flow-ctrl; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rtscts>; >> + }; >> + >> usart1: serial@40011000 { >> compatible = "st,stm32-uart"; >> reg = <0x40011000 0x400>; >> -- >> 2.17.1 >>
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml index 06d5f251ec88..3a4aab5d1862 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml @@ -82,6 +82,26 @@ additionalProperties: false examples: - | #include <dt-bindings/clock/stm32mp1-clks.h> + + usart4: serial@40004c00 { + compatible = "st,stm32-uart"; + reg = <0x40004c00 0x400>; + interrupts = <52>; + clocks = <&clk_pclk1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart4>; + }; + + usart2: serial@40004400 { + compatible = "st,stm32-uart"; + reg = <0x40004400 0x400>; + interrupts = <38>; + clocks = <&clk_pclk1>; + st,hw-flow-ctrl; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rtscts>; + }; + usart1: serial@40011000 { compatible = "st,stm32-uart"; reg = <0x40011000 0x400>;